7685ST-10E

The Eaton Cutler-Hammer 7685ST-10E PanelMate ePro PS Classic operator interface has a 10-inch touchscreen display compatible with gloved hand operations and which has a stainless-steel bezel. In particular, it has a display that measures 10.4 inches with 16 million color graphics and an SVGA resolution of 800 x 600. An auto-dimming feature is also present on this interface and it has a replaceable backlight with a typical lifespan of about 50,000 hours, as well as a brightness rating of 420 Nits. Its enclosure ratings are the NEMA Type 4, 4X, 12 and IP65 ratings.

This interface has a nominal voltage of 24V DC and a current of 1.4 A. The power consumption is 33 W or 113 BTU/hour, while its peak inrush current is 7 A. The 7685ST-10E operating temperature range is 0-60 oC and its non-operating temperature range is -25-70 oC. It also has a system vibration of 1 g peak at 5-500 Hz and system shock of 100 g for both operation or in storage or when the power is off. The non-condensing relative humidity of this drive is 20-95% for operating and for non-operating, while its maximum altitudes are 10,000 feet when operating and 40,000 feet when not operating.

A 1 GB courtesy internal CompactFlash memory is installed on the 7685ST-10E interface, as well as a 512 MB DDR2 RAM. Note that the available storage has C and D partitions and the Protect Mode feature of this interface is always active and works with the C: partition. The interface’s memory is expandable and you can do so using the included external CompactFlash slot and the PCMCIA and USB ports.