DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the 7685T-10C. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number/Catalog No. | 7685T-10C |
Product Type | PanelMate Operator Interface |
Display | 10" TFT |
Series | Classic |
Resolution | SVGA (800x600) |
Brightness | 420 nits |
Backlight | Field Replaceable; 50,000 hours Typical Life |
Voltage Range | 16-30V DC |
Power Consumption | 33W |
Current | 1.4A |
Peak Inrush Current | 7.0A |
Memory | 512MB DDR2 RAM |
Dimensions (HxWxD) | 12.0x12.3x3.9 in. |
Weight | 10.5 lbs. |
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number/Catalog No. | 7685T-10C |
Product Type | PanelMate Operator Interface |
Display | 10" TFT |
Series | Classic |
Resolution | SVGA (800x600) |
Brightness | 420 nits |
Backlight | Field Replaceable; 50,000 hours Typical Life |
Voltage Range | 16-30V DC |
Power Consumption | 33W |
Current | 1.4A |
Peak Inrush Current | 7.0A |
Memory | 512MB DDR2 RAM |
Dimensions (HxWxD) | 12.0x12.3x3.9 in. |
Weight | 10.5 lbs. |
The Eaton Cutler-Hammer 7685T-10C is a PanelMate ePro PS classic operator interface that features a 10.4-inch touchscreen display. Gloved-hand touchscreen operations are supported by this interface because it uses a resistive touchscreen, and 2-touch control is available. The installed touchscreen is an active color matrix thin film transistor (TFT) display with 16 million colors and an SVGA resolution of 800 x 600. This interface also has a display brightness of 420 nits and an auto-dimming feature. Its field replaceable backlight has an average life of 50,000 hours.
Also found on the 7685T-10C interface are communication ports, specifically 1 Ethernet 10/100 Base-T port, 1 RS-232 serial port, and 1 RS-232/422/485 port, as well as 1 video output port and 4 USB 2.0 ports. The slots present are 1 CompactFlash memory card slot and 2 PCMCIA Type II slots that can be used for additional memory. The available memory on this interface is 1 GB on a CompactFlash drive with C and D partitions, as well as 512 MB DDR of RAM. This interface features a Protect Mode to secure the operating system and data files on the C partition of the interface and it is panel mounted, with enclosure ratings of NEMA Type 4/4x/12, IP65.
The nominal voltage of this interface is 24V DC, the input voltage is 16-30V DC, and the current is 1.4 A. Its power consumption and heat outputs are 33 W and 113 BTU/hour respectively, while its peak inrush current is 7 A. It has an operating temperature of 0-60 oC and a storage temperature of -25-70 oC. Its system vibration is 1 g from 5-500 Hz, while its system shock is 100 g.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 7685T-10C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number/Catalog No. | 7685T-10C |
Product Type | PanelMate Operator Interface |
Display | 10" TFT |
Series | Classic |
Resolution | SVGA (800x600) |
Brightness | 420 nits |
Backlight | Field Replaceable; 50,000 hours Typical Life |
Voltage Range | 16-30V DC |
Power Consumption | 33W |
Current | 1.4A |
Peak Inrush Current | 7.0A |
Memory | 512MB DDR2 RAM |
Dimensions (HxWxD) | 12.0x12.3x3.9 in. |
Weight | 10.5 lbs. |
Manufacturer | Eaton Cutler-Hammer |
Brand | Eaton Cutler-Hammer |
Part Number/Catalog No. | 7685T-10C |
Product Type | PanelMate Operator Interface |
Display | 10" TFT |
Series | Classic |
Resolution | SVGA (800x600) |
Brightness | 420 nits |
Backlight | Field Replaceable; 50,000 hours Typical Life |
Voltage Range | 16-30V DC |
Power Consumption | 33W |
Current | 1.4A |
Peak Inrush Current | 7.0A |
Memory | 512MB DDR2 RAM |
Dimensions (HxWxD) | 12.0x12.3x3.9 in. |
Weight | 10.5 lbs. |
The Eaton Cutler-Hammer 7685T-10C is a PanelMate ePro PS classic operator interface that features a 10.4-inch touchscreen display. Gloved-hand touchscreen operations are supported by this interface because it uses a resistive touchscreen, and 2-touch control is available. The installed touchscreen is an active color matrix thin film transistor (TFT) display with 16 million colors and an SVGA resolution of 800 x 600. This interface also has a display brightness of 420 nits and an auto-dimming feature. Its field replaceable backlight has an average life of 50,000 hours.
Also found on the 7685T-10C interface are communication ports, specifically 1 Ethernet 10/100 Base-T port, 1 RS-232 serial port, and 1 RS-232/422/485 port, as well as 1 video output port and 4 USB 2.0 ports. The slots present are 1 CompactFlash memory card slot and 2 PCMCIA Type II slots that can be used for additional memory. The available memory on this interface is 1 GB on a CompactFlash drive with C and D partitions, as well as 512 MB DDR of RAM. This interface features a Protect Mode to secure the operating system and data files on the C partition of the interface and it is panel mounted, with enclosure ratings of NEMA Type 4/4x/12, IP65.
The nominal voltage of this interface is 24V DC, the input voltage is 16-30V DC, and the current is 1.4 A. Its power consumption and heat outputs are 33 W and 113 BTU/hour respectively, while its peak inrush current is 7 A. It has an operating temperature of 0-60 oC and a storage temperature of -25-70 oC. Its system vibration is 1 g from 5-500 Hz, while its system shock is 100 g.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 7685T-10C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your 7685T-10C. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.