The Eaton PanelMate Power Pro 1700 series 1775K-PMPP-1700 terminal is an operator terminal that is designed for industrial applications. It offers an electronic alternative to the legacy hard wired operator terminals that are commonly deployed in industrial control systems. Two options are available for operator input on the PanelMate Power Pro terminals: a touchpanel and a touchscreen. The 1775K-PMPP-1700 terminal comes with the touchpanel option. The terminal has a 7.7-inch color DSTN display which is based on Dual-Scan technology with full VGA resolution and 256-color support. In addition to the color display, the 1775K-PMPP-1700 terminal includes an electronics module. The 1775K-PMPP-1700 terminal also includes 3 x 5 cell control selection, a numeric keypad, a cancel key, and 4 programmable membrane buttons that are located on the right side of the color display. The 1775K-PMPP-1700 terminal requires 24 Volts DC input voltage.

The current consumption rating of the 1775K-PMPP-1700 terminal is 1.1 Amps. The power consumption rating of the unit is 23 Watts. The peak operating temperature for the 1775K-PMPP-1700 terminal with a color dual-scan display is 40 degrees Celsius. Eaton recommends 4 inches of free space above and below the mounted 1775K-PMPP-1700 terminal to facilitate air flow. The free space above and below the unit should not be less than 2 inches. The heat dissipated by an operating 1775K-PMPP-1700 terminal is 78 BTU/hour (23 Watts). The 1775K-PMPP-1700 terminal can store a maximum of 5000 one-hundred page messages. The 1775K-PMPP-1700 terminal comes with 2 integrated serial interfaces which can support RS-232/RS-422 communication. The integrated serial interfaces are provided for printing and network communication. Terminal firmware stored in the on-board non-volatile memory can be easily upgraded. The 1775K-PMPP-1700 terminal is certified by the CE and UL standards.