3985T-PMPP-3000 | Eaton Cutler-Hammer Panelmate PanelMate Power Pro

3985T-PMPP-3000

3985T-PMPP-3000

Description:

The Eaton 3985T-PMPP-3000 terminal is an operator terminal for industrial control systems. The 3985T-PMPP-3000 terminal is part of the PanelMate Power Pro 3000 series.

Rated 4.6 with 17 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 3985T-PMPP-3000

Add more parts to quote

Description:

The Eaton 3985T-PMPP-3000 terminal is an operator terminal for industrial control systems. The 3985T-PMPP-3000 terminal is part of the PanelMate Power Pro 3000 series.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 3985T-PMPP-3000.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 17 reviews

    Technical Specifications for 3985T-PMPP-3000

BrandEaton Cutler-Hammer
SeriesPanelMate Power Pro
Part Number3985T-PMPP-3000
Product typeOperator terminal
Operator inputTouchscreen
Display size10.4 inches
Display typeColor TFT
Input voltage24 Volts DC
Current input1.3 amps
Peak operating temperature50 degrees Celsius
Dimensions304.04 x 312.42 x 98.55 millimeters
BrandEaton Cutler-Hammer
SeriesPanelMate Power Pro
Part Number3985T-PMPP-3000
Product typeOperator terminal
Operator inputTouchscreen
Display size10.4 inches
Display typeColor TFT
Input voltage24 Volts DC
Current input1.3 amps
Peak operating temperature50 degrees Celsius
Dimensions304.04 x 312.42 x 98.55 millimeters
s

About 3985T-PMPP-3000

The 3985T-PMPP-3000 terminal is a touchscreen-enabled industrial HMI terminal. It belongs to the PanelMate Power Pro 3000 series from the Eaton Corporation. Power Pro 3000 series terminals come with 2 types of touchscreens: glass or acrylic. The 3985T-PMPP-3000 terminal has a glass touchscreen. The front panel on the unit is painted steel. The 3985T-PMPP-3000 can be mounted in an enclosure which is 5 inches deep. The terminal is approved for installation inside Type 4, Type 4X, and Type 12 enclosures, provided that it is properly mounted. The 3985T-PMPP-3000 terminal meets UL, CSA, and CE requirements. The terminal has memory which is sufficient for storing 5000 one-hundred-page messages. Two serial ports are provided on the electronic module and these can be used for printing and network connectivity and they support RS-232 and RS-422 communication.



 



The display size on the 3985T-PMPP-3000 terminal is 10.4 inches. The display type is the TFT type with VGA (640 x 480) resolution. The display supports a 256-color palette. The touchscreen can be used for operator input and it provides a keypad, a cancel key, 4 configurable control buttons, and 3 x 5 cell control selection. The 3985T-PMPP-3000 terminal requires 24 Volts DC input voltage and it consumes 1.3 Amps and 26 Watts. The ambient operating temperature around the mounted terminal should not exceed 50 degrees Celsius. The rated heat dissipation of the terminal is 102 BTU per hour. A minimum of 6 inches of free space needs to be provided around the terminal. The dimensions of the 3985T-PMPP-3000 terminal are 304.04 x 312.42 x 98.55 millimeters. The cutout dimensions for the 3985T-PMPP-3000 terminal are 289.56 x 279.65 millimeters. The executive firmware stored in the non-volatile memory can be easily upgraded.



Repair Services for 3985T-PMPP-3000

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 3985T-PMPP-3000. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 3985T-PMPP-3000

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 3985T-PMPP-3000

Resolutions For 3985T-PMPP-3000

About

Technical Specifications for 3985T-PMPP-3000

BrandEaton Cutler-Hammer
SeriesPanelMate Power Pro
Part Number3985T-PMPP-3000
Product typeOperator terminal
Operator inputTouchscreen
Display size10.4 inches
Display typeColor TFT
Input voltage24 Volts DC
Current input1.3 amps
Peak operating temperature50 degrees Celsius
Dimensions304.04 x 312.42 x 98.55 millimeters
BrandEaton Cutler-Hammer
SeriesPanelMate Power Pro
Part Number3985T-PMPP-3000
Product typeOperator terminal
Operator inputTouchscreen
Display size10.4 inches
Display typeColor TFT
Input voltage24 Volts DC
Current input1.3 amps
Peak operating temperature50 degrees Celsius
Dimensions304.04 x 312.42 x 98.55 millimeters

About 3985T-PMPP-3000

The 3985T-PMPP-3000 terminal is a touchscreen-enabled industrial HMI terminal. It belongs to the PanelMate Power Pro 3000 series from the Eaton Corporation. Power Pro 3000 series terminals come with 2 types of touchscreens: glass or acrylic. The 3985T-PMPP-3000 terminal has a glass touchscreen. The front panel on the unit is painted steel. The 3985T-PMPP-3000 can be mounted in an enclosure which is 5 inches deep. The terminal is approved for installation inside Type 4, Type 4X, and Type 12 enclosures, provided that it is properly mounted. The 3985T-PMPP-3000 terminal meets UL, CSA, and CE requirements. The terminal has memory which is sufficient for storing 5000 one-hundred-page messages. Two serial ports are provided on the electronic module and these can be used for printing and network connectivity and they support RS-232 and RS-422 communication.



 



The display size on the 3985T-PMPP-3000 terminal is 10.4 inches. The display type is the TFT type with VGA (640 x 480) resolution. The display supports a 256-color palette. The touchscreen can be used for operator input and it provides a keypad, a cancel key, 4 configurable control buttons, and 3 x 5 cell control selection. The 3985T-PMPP-3000 terminal requires 24 Volts DC input voltage and it consumes 1.3 Amps and 26 Watts. The ambient operating temperature around the mounted terminal should not exceed 50 degrees Celsius. The rated heat dissipation of the terminal is 102 BTU per hour. A minimum of 6 inches of free space needs to be provided around the terminal. The dimensions of the 3985T-PMPP-3000 terminal are 304.04 x 312.42 x 98.55 millimeters. The cutout dimensions for the 3985T-PMPP-3000 terminal are 289.56 x 279.65 millimeters. The executive firmware stored in the non-volatile memory can be easily upgraded.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 3985T-PMPP-3000. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 3985T-PMPP-3000. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF