5485K-AC | Eaton Cutler-Hammer Panelmate PanelMate Power Pro

5485K-AC

5485K-AC

Description:

The Eaton 5485K-AC terminal is an industrial HMI terminal. It requires AC input and it is part of PanelMate Power Pro 5000 series.

Rated 4.7 with 11 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for 5485K-AC

Add more parts to quote

Description:

The Eaton 5485K-AC terminal is an industrial HMI terminal. It requires AC input and it is part of PanelMate Power Pro 5000 series.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the 5485K-AC.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 11 reviews

    Technical Specifications for 5485K-AC

BrandEaton Cutler-Hammer
SeriesPanelMate Power Pro
Part Number5485K-AC
Product typeOperator panel
Operator inputTouchpanel
Input voltage120 / 230 Volts AC
Display size10.4 inches
Display typeColor TFT
Serial ports2
Display resolutionVGA
Dimensions19.18 x 19 x 7.48 inches
BrandEaton Cutler-Hammer
SeriesPanelMate Power Pro
Part Number5485K-AC
Product typeOperator panel
Operator inputTouchpanel
Input voltage120 / 230 Volts AC
Display size10.4 inches
Display typeColor TFT
Serial ports2
Display resolutionVGA
Dimensions19.18 x 19 x 7.48 inches
s

About 5485K-AC

The 5485K-AC terminal is an AC powered PanelMate Power Pro 5000 series operator terminal. It is developed by THE Eaton Corporation for industrial applications. The 5485K-AC terminal can be used to replace traditional hard-wired operator panels in industrial control systems. The 5485K-AC terminal features a large and easy-to-see 10.4-inch color TFT display. The display resolution is VGA and it has a 256-color palette for the graphics. The 5485K-AC terminal features a touchpanel for operator input and it comes with an AC power converter. The required AC input is 120 to 230 Volts AC. The terminal consumes 0.5 Amps of current and 40 Watts of power. The 5485K-AC terminal has a split architecture and the front panel is painted steel. The 5485K-AC terminal can be mounted inside a 19-inch rack.



 



The AC powered 5485K-AC terminal dissipates 137 BTU per hour as heat and requires 6 inches of free space above and below it as minimum spaciing when it is mounted inside an enclosure. If the free space is less than the recommended amount, then the ambient temperature could exceed the recommended maximum threshold of 50 degrees Celsius and this could lead to the overheating of the terminal which can damage it or lead to degraded performance. The dimensions of the split-architecture 5485K-AC terminal are 19.18 x 19 x 7.48 inches. The cutout dimensions are 12.44 x 9.6 inches. There are 2 RS-232 or RS-422 serial interfaces on the 5485K-AC terminal which can be used for printing and communication with PLCs. Optional modules for ProfiBus, DeviceNet, and Data Highway Plus communication are also available and they can be ordered if required.



Repair Services for 5485K-AC

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5485K-AC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Dimensions For 5485K-AC

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For 5485K-AC

Resolutions For 5485K-AC

About

Technical Specifications for 5485K-AC

BrandEaton Cutler-Hammer
SeriesPanelMate Power Pro
Part Number5485K-AC
Product typeOperator panel
Operator inputTouchpanel
Input voltage120 / 230 Volts AC
Display size10.4 inches
Display typeColor TFT
Serial ports2
Display resolutionVGA
Dimensions19.18 x 19 x 7.48 inches
BrandEaton Cutler-Hammer
SeriesPanelMate Power Pro
Part Number5485K-AC
Product typeOperator panel
Operator inputTouchpanel
Input voltage120 / 230 Volts AC
Display size10.4 inches
Display typeColor TFT
Serial ports2
Display resolutionVGA
Dimensions19.18 x 19 x 7.48 inches

About 5485K-AC

The 5485K-AC terminal is an AC powered PanelMate Power Pro 5000 series operator terminal. It is developed by THE Eaton Corporation for industrial applications. The 5485K-AC terminal can be used to replace traditional hard-wired operator panels in industrial control systems. The 5485K-AC terminal features a large and easy-to-see 10.4-inch color TFT display. The display resolution is VGA and it has a 256-color palette for the graphics. The 5485K-AC terminal features a touchpanel for operator input and it comes with an AC power converter. The required AC input is 120 to 230 Volts AC. The terminal consumes 0.5 Amps of current and 40 Watts of power. The 5485K-AC terminal has a split architecture and the front panel is painted steel. The 5485K-AC terminal can be mounted inside a 19-inch rack.



 



The AC powered 5485K-AC terminal dissipates 137 BTU per hour as heat and requires 6 inches of free space above and below it as minimum spaciing when it is mounted inside an enclosure. If the free space is less than the recommended amount, then the ambient temperature could exceed the recommended maximum threshold of 50 degrees Celsius and this could lead to the overheating of the terminal which can damage it or lead to degraded performance. The dimensions of the split-architecture 5485K-AC terminal are 19.18 x 19 x 7.48 inches. The cutout dimensions are 12.44 x 9.6 inches. There are 2 RS-232 or RS-422 serial interfaces on the 5485K-AC terminal which can be used for printing and communication with PLCs. Optional modules for ProfiBus, DeviceNet, and Data Highway Plus communication are also available and they can be ordered if required.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5485K-AC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your 5485K-AC. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF