Free UPS Ground on All Orders!
Request a
Fast Quote
Account
Cart
Quote
+1 (919) 205-4392
FANUC Series 16 A16B-3200-0220

Product image is representative; revision or series may vary. Contact us to request a specific version.

A16B-3200-0220

|
Need a Specific Revision?

The FANUC A16B-3200-0220 is a PROFIBUS DP card designed for reliable data communication. Operating within the Series 16 product line, it supports up to 12 Mbps baud rates, facilitating efficient device integration.

In Stock
Ships from Raleigh, NC
2 Year DO Supply Warranty
Not an Authorized Distributor: DO Supply is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All of our products come with DO Supply's 2-year warranty.
Learn more

Technical specifications for A16B-3200-0220

ManufacturerFANUC
Product TypePROFIBUS DP Card
Product LineSeries 16
Part NumberA16B-3200-0220
Weight0.94 lbs (0.43 kg)
Protocol / Physical LayerPROFIBUS DP (RS-485)
Network Connector9-pin D-sub
Supported Baud Rates≤12 Mbps
Topology & Reach≈100 m @12 Mbps
Mounting / SlotBackplane plug-in
Power SourceBackplane power
Operating TemperatureIndoor ≤ +45 °C
DiagnosticsLink / Fault LEDs
Integration / SetupConfigured via GSD
Mass~0.5–0.9 kg
Primary RoleHandles cyclic I/O
Request a Repair

The A16B-3200-0220, part of FANUC’s Series 16, is engineered as a PROFIBUS DP card, tailored for seamless communication in industrial settings. This device supports the PROFIBUS DP protocol utilizing the RS-485 physical layer, ensuring compatibility and reliability within established networks.

Connected via a 9-pin D-sub port, this module facilitates various baud rates, with support up to 12 Mbps. It maintains connectivity over a distance of approximately 100 meters, which is essential in larger setups where devices are distributed across significant areas.

For installation, the card is designed to fit into the backplane as a plug-in unit, leveraging the backplane for its power supply. The environmental specifications allow for use in indoor applications, with a maximum operating temperature of +45 °C, making it suitable for typical factory conditions.

Diagnostics are simplified with integrated link and fault LEDs, allowing for quick system checks and prompt troubleshooting. The configuration and integration of the card into the network occur via the GSD, easing setup procedures. Weighing between 0.5 and 0.9 kg, the module is manageable while providing essential functionality for handling cyclic I/O operations.