IC660BBD023

The IC660BBD023 I/O block is a 24 Volts DC rated I/O block by GE Fanuc. It meets the Ul standard and it complies with different industrial standards. It is 2-wire and 3-wire sensor compatible and is part of the GE Genius I-O PLC system. It is equipped with 16 individual circuits that can work as inputs, outputs, or tri-state inputs. The load current rating of the I/O block is 2 Amps. This intelligent I/O device is used for interfacing with a wide variety of input and output devices. It is also compatible with DC sensors and actuator devices. This Genius I/O device has open architecture and it should be protected against water splashes, dust, and airborne contaminants. It can be used in indoor locations only. The front side of the block has LED indicators to monitor the status of the unit and the I/O.

For internal communication, the IC660BBD023 I/O block has 2 serial ports known as Serial Port 1 and Serial Port 2. It is also equipped with a Shield In port and a Shield Out port. The I/O block can be configured or monitored by using a programmable controller connected to the monitor port. The IC660BBD023 I/O block provides short circuit protection, overtemperature protection, failed switch detection, overload detection, and open wire detection. The block offers selectable input filter times ranging between 10 milliseconds and 100 milliseconds. During normal operation, the IC660BBD023 I/O block dissipates 68.8 Watts of heat when using 16 outputs at 2 Amps. The output current in steady-state is 2 Amps per circuit and the output off-state leakage current is 1.9 milliAmps. The operating environment's temperature should be set between 0 and 60 degrees Celsius.