IC660BBD100

The GE Fanuc IC660BBD100 I/O block is a 115 Volts AC rated I/O block. It is a circuit I/O block that comes with 1 group of 8 circuits. Each circuit of the block can act as an input, an output, or a tristate input. It is made by GE Fanuc Automation in Series 90-70 and it is used in different industrial and manufacturing sectors. The running frequency of the block is 50 to 60 Hertz. This I/O block comes with 8 inputs and it can be connected to a programmer, controller, or monitoring device to monitor different configurations by using the port located on the top of the block. The block is also equipped with serial controller ports known as Ports 1 and 2. The IC660BBD100 I/O block is compatible with the Series 90-30 and Series 90-70 GE PLC systems. The block can be connected to a personal computer and it can be configured by using the Microsoft Windows XP operating system.

The GE Fanuc IC660BBD100 I/O block comes with different LED indicators on the front. It has an "I/O Enabled" LED and a "Unit OK" LED that illuminates when there is an application in progress. The block comes with exclusive features including selectable thresholds and advanced diagnostics. The input to the ground or the serial bus isolation of the block is 1500 Volts. The IC660BBD100 I/O block is able to dissipate 28 Watts of maximum heat when it is connected with 16 inputs at a full load. The terminal board current rating of the block is 5 Amps. The environmental temperature for proper operation should be set between 0 and 60 degrees Celsius.