IC660EBA100

The GE IC660EBA100 electronics assembly is an electronics assembly that operates with a specific GE analog I/O block. Both of these pieces of equipment are designed and distributed by GE Fanuc Automation. This specific electronics assembly operates with a nominal block power rating of 115 Volts AC with an operating voltage range of 98 to 132 Volts AC. This block also comes with a maximum power rating of 10 VA. It is important to mention that the GE Fanuc Automation IC660EBA100 electronics assembly provides all the electronic parts that are necessary for the I/O block to operate in any compatible application. When this electronics assembly is used, it will require a terminal assembly kit with all the connections and ports that are necessary for it to operate.

The GE Fanuc Automation IC660EBA100 electronics assembly supports a block that comes with 4 input circuits and 2 output circuits. The block comes with 2 LEDs that give status updates for the unit and the status of the I/O connections. The whole block has a block-to-block isolation rating of 1500 Volts and a heat dissipation rating of 6 Watts. It is important to install the GE Fanuc Automation IC660EBA100 electronics assembly in a clean area without any hazardouds materials present in it. The temperature of this environment must not fall outside of the 0 to 60 degrees Celsius range and the relative humidity level should be between 5 and 95 percent. The thermal drift of the block is 10 PPM typical per degree Celsius. The maximum thermal drift is 40 PPM per degree Celsius. This block has an output resolution of 12 bits plus sign and an output update frequency of 4 milliseconds. The output load of the block is 2000 Ohms or greater.