IC660EBD020

The IC660EBD020 is the electronics assembly that is used with the IC660TSD020 terminal base to form the Genius I/O 16-channel, 24/48 VDC Discrete Input, and Output I/O block. These components were formerly manufactured by GE Fanuc Automation now under Emerson Automation. The IC660EBD020 contains the electronic circuitry that is used to process the field voltage signals forwarded to the module’s channels. This electronics assembly contains the RC snubber circuits, smart switch, and Light Emitting Diode (LED) for indication of channel state. It also provided connectivity to the backplane where power is drawn and data exchange to the partner controller is implemented. The IC660EBD020 provides Sixteen (16) discrete input channels that are designed to enter ON state at input voltage signal range of 16-24 VDC at processing speed of 1.7 ms plus the configured signal delay. Conversely, the output channels are capable of generating 2 Amperes per circuit with a maximum inrush current of 10 Amperes at 10 ms duration. The total output current that the I/O block generates is 15 Amperes at 35 Degree Celsius while the maximum switching frequency is once per second. Input diagnostics available include Open wire, Overtemperature, and Failed switch detection while output diagnostics include Short circuit, Overload, No Load, failed switch, and Overtemperature. The electronics assembly has an operating temperature requirement of 0 to 60 Degree Celsius, the Storage temperature of -40 Degree Celsius to 100 Degree Celsius with relative Humidity of 5-95%, non-condensing. The IC660EBD020 operating vibration is5-10 Hz, with an acceptable displacement of up to 2” or 5.088.

The IC660EBD020 is the electronics assembly for the IC660BBD022 circuit source I/O block. Both of these parts have been designed by GE Fanuc Automation and included in the Genius series of GE I/O blocks. This specific model includes 16 discrete inputs and outputs. This block can be used with 2 different kinds of sensors such as 3-wire solid-state sensors and electromechanical sensors. This block can provide and receive currents from these specific output devices. The GE Fanuc Automation IC660EBD020 electronics assembly includes all the circuitry and electronic components of the block. The circuits existent in the block can be configured as inputs, tristate inputs, or outputs, depending on the requirements of the applications at hand. The GE Fanuc Automation IC660EBD020 electronics assembly comes with configurable features that help improve I/O block operations. For example, it provides an output pulse test capability and a selectable input filter time. Other features are a CPU redundancy and a hold last state feature for the outputs. The input processing time for this block is 5600 Ohms. The GE Fanuc Automation IC660EBD020 electronics assembly is compatible with a Genius bus controller, PCIM and QBIM modules, and with Genius handheld monitor. It operates with a voltage range of 18 to 56 Volts DC and has a maximum ripple of 10 percent. The block has a required DC power of 150 milliamps typical and 300 milliamps maximum. It can be used in an environment with a maximum temperature of 60 degrees Celsius. The block has a heat dissipation rating of 68.8 Watts and a block to block isolation of 1500 Volts.