IC660EBR100

The IC660EBR100 electronics assembly block is manufactured by the GE Intelligent Platforms/GE Fanuc Automation. It belongs to the Genius I/O series and it features 16 circuit relay outputs that are placed in 4 separate groups of 4 outputs each as well as an LED on each circuit with an individual relay coil state. This electronics assembly has an approximate weight of 1.8 kilograms and it measures 8.83 x 3.50 x 3.94 inches. Its environmental specifications are an operating temperature ranging from 0 to 60 degrees Celsius, and a storage temperature range of -40 to 100 degrees Celsius at a relative humidity range of 5 to 95 percent, non-condensing. The IC660EBR100 electronics assembly block has a nominal voltage rating of 115 Volts AC and an operating voltage range of 93 to 132 volts AC or a nominal voltage rating of 230 Volts AC at an operating voltage of 185 to 265 Volts AC.

The IC660EBR100 electronics assembly block has a power current requirement of 87 milliamps at a voltage of 115 Volts AC, with a power supply dropout time of 1 cycle. It comes with a heat dissipation rating of 10.1 Watts maximum with 16 outputs on. The GE Fanuc IC660EBR100 electronics assembly block has a maximum output current of 2 Amps per circuit, and a maximum switching power of 60 Watts or 125 Volt-Amps. It also has an inrush current of 2 Amps (maximum) for every circuit, with an output off-state leakage current of 0.1 milliamps. It has an all-out switching frequency of 20 cycles in 60 seconds for the inductive loads or an output turn-on delay time of 5 microseconds. The IC660EBR100 electronics assembly block has an output voltage ranging from 5 to 250 Volts AC or 5 to 220 Volts DC, as well as a minimum recommended load of 10 milliamps. It also has a fixed coil moving armature relay type.