IC660TBA106

The Genius I/O terminal assembly that is known as the IC660TBA106 terminal assembly is an assembly with 6 analog inputs. This assembly is part of a terminal block that is designed to allow and enhance communication between controllers and various field devices. The analog signal which is sent between these components is emitted within the current range of 4 milliamps to 20 milliamps. The IC660TBA106 current-source terminal assembly is built by GE Fanuc and it has features like circuit scaling, input conversion time, adjustable input alarms, and CPU redundancy. The terminal is compatible with PLC devices from GE Series 90-70 and it supports various programming software which provides a full set of customizable options. In order to configure the terminal, the users must use a dedicated hand-held monitor.

The GE Fanuc IC660TBA106 terminal assembly has an input conversion time of 16.6 to 400 milliseconds and overrange capacity of 0 to 25 milliamps. The terminal requires a power source with voltage a range of 93 to 132 Volts AC or 105 to 145 Volts DC. The usual isolation for block to block relation is 1500 Volts and the group to group isolation is 1500 Volts RMS. The IC660TBA106 terminal assembly has a dropout time of a single cycle for the AC voltage  and minimum dropout time of 10 milliseconds for the DC voltage. The rated current of the component is 250 milliamps for AC power sources and it is 140 milliamps for DC power sources. In addition to that, the terminal assembly has a rejection value of -45 decibels at a frequency of 50 to 60 Hertz and an input impedance of 100 Ohms during normal operation.