ES0621

The ES0621 display is a GE Fanuc QuickPanel control panel display equipped with a 6-inch display screen. The ES0621 display features the touchscreen input method while the supported software type is Proficy View Machine Edition software. The unit is also equipped with the HMI-CAB-CS10 communication cables while the supported communication ports are the RS-232 and the RS-485 ports. The unit weighs up to 5 pounds and it comes with shipping dimensions 14 x 12 x 10 inches. It features an input power rating of 24 Volts DC. The ES0621 display is equipped with the 10BaseT/100Base Tx auto-negotiate Ethernet Port. Therefore, it can be connected to the internet, allowing for remote usability. This connection is made through the connection of the Ethernet network cable to the unit through the RJ45 connector found on the bottom of the enclosure.

The ES0621 display features LED indicators on it that are used for indicating the unit's status. To access the port, use either the Windows CE network communication or a custom application. To set the IP address on the QuickPanel control panel display, use the DHCP configuration. The ES0621 display should be connected to a DHCP server that is connected to the same network to allow the unit to pick a valid IP address. The ES0621 display is also equipped with an expansion bus, and it can support optional modules that are mounted to the expansion bus directly. To access the ES0621 display expansion bus connector, open the back of the unit. Prior to opening the back of the unit, ensure that the power is disconnected. Note that if the power is connected while attempting to open or access the expansion bus, this can result in serious injury or in damaged components.