The GE Fanuc IC755ACC12PRO set is a set of 3 replacement screen protectors for 12-inch Quickpanel+ displays. The Quickpanel+ terminal is an industrial operator interface terminal which is a microcomputer based on the ARM microprocessor and it supports a touchscreen display and multiple communication options. The recommended sequence of steps for installation of one of the IC755ACC12PRO screen protectors on to the touchscreen display are as follows. First, the protective film should be removed from the Quickpanel+ terminal screen, the display should be cleaned of dust and fingerprints, the IC755ACC12PRO screen protector's backing sheet should be peeled away, the application of the IC755ACC12PRO screen protector should start from the corner of the Quickpanel+ display screen, and then the rest of the IC755ACC12PRO screen protector should be applied and smoothed over. The touchscreen and its protector should not be operated with hard or blunt objects because doing so can damage the display.

To prevent equipment damage and personal injury, it should be ensured that the DC power supply to the Quickpanel+ unit is switched off and that the leads are not energized before they are connected to the power plug on the Quickpanel+ unit. The dimensions of the 12-inch Quickpanel+ units are 314 x 248 x 65 millimeters. The unit weight is approximately 3 kilograms per terminal. A panel cutout measuring 302 x 228 millimeters is required for the installation of the 12-inch Quickpanel+ terminals. The ambient operating temperature range is from 0 to 55 degrees Celsius and the ambient storage temperature range is from -10 to 60 degrees Celsius. The maximum relative humidity level that is tolerable is 85%. The Quickpanel+ units should not be installed at altitudes in excess of 2000 meters.