IC694MDL634

The GE Fanuc IC694MDL634 Input Module from the RX3i PacSystem series has a rated voltage of 24 Volts DC (positive or negative logic), an input current of 7 milliamps at the rated voltage, an input voltage range from 0 to 30 Volts DC, and a power consumption rating of 45 milliamps from the 5 Volts bus and 62 milliamps from a 24 Volts supply. This input module's characteristics make it compatible with a wide selection of limit switches, electronic proximity switches, and pushbuttons. The input characteristics include an on-state voltage between 11.5 and 30 Volts DC, an off-state voltage between 0 and 5 Volts DC, an on-state current of 3.2 milliamps minimum, an off-state current of 1.1 milliamps maximum, an on response time of 7 milliseconds typical, and an off response time of 7 milliseconds typical. It has 8 separate input points with the main power input terminal. Some inputs are powered by 24 Volts OUT and 0 Volts OUT terminals, depending on the module's requirements.

The GE Fanuc IC694MDL634 Input Module has 8 green LEDs that show the module inputs' on and off status of points from 1 to 8. This GE input module is a low voltage module, and this is signified by a blue band on the top of the module. The input module has an operating temperature range from 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) and storage temperature range of -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). It also has a tolerable non-condensing humidity range from 5 to 95%. The module has a shock resistance rating of 15 G for 11 milliseconds according to the IEC60068-2-27 and JISC0912 standards, and a vibration rating of 10 to 57 Hertz with 0.0524 millimeters (0.006 inches) of peak displacement with 57 to 500 Hertz and 1.0 G of maximum acceleration to meet the IEC60068-2-6 and JISC0911 standards.