IC693ACC303 - In Stock | GE Fanuc - GE IP - Emerson Series 90-30

IC693ACC303

Rated 4.8 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693ACC303

Revisions: A 
Description: The IC693ACC303 memory card is an EEPROM card intended for use with micro PLC handheld programmers from Series 90-30 by GE Fanuc. The memory card module supports models 340, 341, and 351 and it has a storage capacity of 32 KB. The card has a write protection option and it features transfer time of 1 minute and 35 seconds. The card is mounted on the memory card slot located on the left side of the host device.
In Stock Ships Today
Request a quote for IC693ACC303

Description:

The IC693ACC303 memory card is an EEPROM card intended for use with micro PLC handheld programmers from Series 90-30 by GE Fanuc. The memory card module supports models 340, 341, and 351 and it has a storage capacity of 32 KB. The card has a write protection option and it features transfer time of 1 minute and 35 seconds. The card is mounted on the memory card slot located on the left side of the host device.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693ACC303.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 12 reviews

    Technical Specifications for IC693ACC303

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693ACC303
TypeEEPROM card
Storage capacity32K
Approximate transfer time1 minute and 35 seconds
Compatible componentsMicro PLC handheld programmers
Supported PLC modelsModel 340, 341 and 351
FunctionalityRead, write or verify data for configuration and program logic
Write protectionYes
PLC operating modesProgram, protection and data
Position of memory card slotLeft side of the PLC
PLC connection cable length2 meters (6 feet)
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693ACC303 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693ACC303 units instead of migration.

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693ACC303
TypeEEPROM card
Storage capacity32K
Approximate transfer time1 minute and 35 seconds
Compatible componentsMicro PLC handheld programmers
Supported PLC modelsModel 340, 341 and 351
FunctionalityRead, write or verify data for configuration and program logic
Write protectionYes
PLC operating modesProgram, protection and data
Position of memory card slotLeft side of the PLC
PLC connection cable length2 meters (6 feet)
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693ACC303 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693ACC303 units instead of migration.

s

About IC693ACC303

The IC693ACC303 memory card is a type of EEPROM memory card that is used with the programmable logic controllers that are manufactured by GE Fanuc. The supported micro handheld programmers are available through GE Series 90-30 and they are used for variety of applications in different industries. The IC693ACC303 EEPROM memory card can be used for reading, writing, or verifying the data that is necessary for the logic of the program or the adjustment of the device. The GE Fanuc PLCs that use this kind of memory card work in the program mode, protection mode, or data mode, depending on the requirements of the application at hand. The IC693ACC303 memory card has a storage capacity of 32 KB and it can be combined with models labelled with the following numbers: 340, 341, and 351.



 



The IC693ACC303 memory card is equipped with a write protection switch that can be very helpful and it is inserted into memory slot which is positioned at the left side of the programmable logic controller that hosts it. These PLCs are connected with standard cables that are 2 meters or 6 feet long and it is equipped with a 42-key keypad that makes operation easy and simple. The IC693ACC303 memory card is suitable for storing any kind of data required for the proper operation of the PLC and the data transfer process is simplified. The data types include different statements related to the program logic, registers, and data that are required in order to perform successful configurations for a specific application. The approximate transfer time is 1 minute and 35 seconds. The main purpose of the card is to transfer program logic and configuration of one device to another device.



Repair Services for IC693ACC303

Type Lead Time Price Action
Repair Service 2-4 weeks $356cartAdd to Cart

Our highly skilled technicians can repair your IC693ACC303. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693ACC303

Please refer to the manual for more information about the IC693ACC303 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693ACC303A
IC693ACC303-A, Series A, Rev A Request Quote
Common misspellings:
  • 1C693ACC303
  • IC693ACC3o3
  • IC693ACC303

Dimensions For IC693ACC303

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693ACC303

Resolutions For IC693ACC303

About

Technical Specifications for IC693ACC303

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693ACC303
TypeEEPROM card
Storage capacity32K
Approximate transfer time1 minute and 35 seconds
Compatible componentsMicro PLC handheld programmers
Supported PLC modelsModel 340, 341 and 351
FunctionalityRead, write or verify data for configuration and program logic
Write protectionYes
PLC operating modesProgram, protection and data
Position of memory card slotLeft side of the PLC
PLC connection cable length2 meters (6 feet)
Product Lifecycle Status*Discontinued/Obsolete
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693ACC303
TypeEEPROM card
Storage capacity32K
Approximate transfer time1 minute and 35 seconds
Compatible componentsMicro PLC handheld programmers
Supported PLC modelsModel 340, 341 and 351
FunctionalityRead, write or verify data for configuration and program logic
Write protectionYes
PLC operating modesProgram, protection and data
Position of memory card slotLeft side of the PLC
PLC connection cable length2 meters (6 feet)
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693ACC303 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693ACC303 units instead of migration.

About IC693ACC303

The IC693ACC303 memory card is a type of EEPROM memory card that is used with the programmable logic controllers that are manufactured by GE Fanuc. The supported micro handheld programmers are available through GE Series 90-30 and they are used for variety of applications in different industries. The IC693ACC303 EEPROM memory card can be used for reading, writing, or verifying the data that is necessary for the logic of the program or the adjustment of the device. The GE Fanuc PLCs that use this kind of memory card work in the program mode, protection mode, or data mode, depending on the requirements of the application at hand. The IC693ACC303 memory card has a storage capacity of 32 KB and it can be combined with models labelled with the following numbers: 340, 341, and 351.



 



The IC693ACC303 memory card is equipped with a write protection switch that can be very helpful and it is inserted into memory slot which is positioned at the left side of the programmable logic controller that hosts it. These PLCs are connected with standard cables that are 2 meters or 6 feet long and it is equipped with a 42-key keypad that makes operation easy and simple. The IC693ACC303 memory card is suitable for storing any kind of data required for the proper operation of the PLC and the data transfer process is simplified. The data types include different statements related to the program logic, registers, and data that are required in order to perform successful configurations for a specific application. The approximate transfer time is 1 minute and 35 seconds. The main purpose of the card is to transfer program logic and configuration of one device to another device.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $356cartAdd to Cart

Our highly skilled technicians can repair your IC693ACC303. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $356cartAdd to Cart

Our highly skilled technicians can repair your IC693ACC303. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693ACC303 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693ACC303A
IC693ACC303/A, Series A, Rev A Request Quote

Common misspellings:
  • IC693ACC3o3
  • IC693ACC303
PDF