IC693ACC307 - In Stock | GE Fanuc - GE IP - Emerson Series 90-30

IC693ACC307

Rated 4.9 with 14 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693ACC307

Revisions: A 
Description: The IC693ACC307 I/O bus terminator plug by GE Intelligent Platforms/GE Fanuc is used for automation and control functions for various industrial applications. The 25-pin plug is intended for use with programmable logic controllers form Series 90-30 and it supports the IC693CBL302 and IC693CBL314 expansion cables. 
In Stock Ships Today
Request a quote for IC693ACC307

Description:

The IC693ACC307 I/O bus terminator plug by GE Intelligent Platforms/GE Fanuc is used for automation and control functions for various industrial applications. The 25-pin plug is intended for use with programmable logic controllers form Series 90-30 and it supports the IC693CBL302 and IC693CBL314 expansion cables. 


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693ACC307.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 14 reviews

    Technical Specifications for IC693ACC307

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693ACC307
TypeBaseplate I/O bus terminator plug
Resistor packYes
Supported expansion cablesIC693CBL302/IC693CBL314
I/O expansion cable length15 meters (50 feet)
Expansion cableTermination resistors at the end
ApplicationsPackaging, material handling, food processing, etc.
CategoryAutomation and control
Compatible componentsPLCs
Connector25-pin
System operating temperature0 to 55 degrees Celsius (32 to 131 degrees Fahrenheit)
System storage temperature-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693ACC307 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693ACC307 units instead of migration.

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693ACC307
TypeBaseplate I/O bus terminator plug
Resistor packYes
Supported expansion cablesIC693CBL302/IC693CBL314
I/O expansion cable length15 meters (50 feet)
Expansion cableTermination resistors at the end
ApplicationsPackaging, material handling, food processing, etc.
CategoryAutomation and control
Compatible componentsPLCs
Connector25-pin
System operating temperature0 to 55 degrees Celsius (32 to 131 degrees Fahrenheit)
System storage temperature-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693ACC307 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693ACC307 units instead of migration.

s

About IC693ACC307

The IC693ACC307 I/O bus terminator plug introduced by GE Fanuc or GE Intelligent Platforms is commonly used with PLC devices from GE Series 90-30. This part has wide range of uses in industrial standards and it is made of high-quality materials and according to the requirements of all the relevant industrial standards. The IC693ACC307 plug is intended for controllers which operate as part of bigger systems that require high levels of reliability at all times. The PLC components are made for easy programming and simple use that will speed up the application processes in the industrial environments. The PLCs from the series are built for rough operating conditions and processes in the manufacturing which require high levels of performance.



 



The IC693ACC307 terminator plug includes a connector resistor pack and it is delivered with baseplates. The plug has a 25-pin connector and it includes cable resistors for termination that allow for a safe attachment to the expansion baseplate connector. The IC693ACC307 plug is compatible with the following expansion cable variants: the IC693CBL302 and the IC693CBL314. This industrial input/output bus terminator plug is used for all the compatible PLC CPUs which operate in the temperature range of 0 to 55 degrees Celsius (32 to 131 degrees Fahrenheit), even though the plug itself is resistant to even more drastic temperatures. The typical storage temperature for the PLC systems is -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The expansion cables used with this plug are 15 meters or 50 feet long and they must be installed as the ultimate cables in the expansion system.



Repair Services for IC693ACC307

Type Lead Time Price Action
Repair Service 2-4 weeks $76cartAdd to Cart

Our highly skilled technicians can repair your IC693ACC307. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693ACC307

Please refer to the manual for more information about the IC693ACC307 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693ACC307A
IC693ACC307-A, Series A, Rev A Request Quote
Common misspellings:
  • 1C693ACC307
  • IC693ACC3o7
  • IC693ACC307

Dimensions For IC693ACC307

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693ACC307

Resolutions For IC693ACC307

About

Technical Specifications for IC693ACC307

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693ACC307
TypeBaseplate I/O bus terminator plug
Resistor packYes
Supported expansion cablesIC693CBL302/IC693CBL314
I/O expansion cable length15 meters (50 feet)
Expansion cableTermination resistors at the end
ApplicationsPackaging, material handling, food processing, etc.
CategoryAutomation and control
Compatible componentsPLCs
Connector25-pin
System operating temperature0 to 55 degrees Celsius (32 to 131 degrees Fahrenheit)
System storage temperature-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
Product Lifecycle Status*Discontinued/Obsolete
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693ACC307
TypeBaseplate I/O bus terminator plug
Resistor packYes
Supported expansion cablesIC693CBL302/IC693CBL314
I/O expansion cable length15 meters (50 feet)
Expansion cableTermination resistors at the end
ApplicationsPackaging, material handling, food processing, etc.
CategoryAutomation and control
Compatible componentsPLCs
Connector25-pin
System operating temperature0 to 55 degrees Celsius (32 to 131 degrees Fahrenheit)
System storage temperature-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693ACC307 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693ACC307 units instead of migration.

About IC693ACC307

The IC693ACC307 I/O bus terminator plug introduced by GE Fanuc or GE Intelligent Platforms is commonly used with PLC devices from GE Series 90-30. This part has wide range of uses in industrial standards and it is made of high-quality materials and according to the requirements of all the relevant industrial standards. The IC693ACC307 plug is intended for controllers which operate as part of bigger systems that require high levels of reliability at all times. The PLC components are made for easy programming and simple use that will speed up the application processes in the industrial environments. The PLCs from the series are built for rough operating conditions and processes in the manufacturing which require high levels of performance.



 



The IC693ACC307 terminator plug includes a connector resistor pack and it is delivered with baseplates. The plug has a 25-pin connector and it includes cable resistors for termination that allow for a safe attachment to the expansion baseplate connector. The IC693ACC307 plug is compatible with the following expansion cable variants: the IC693CBL302 and the IC693CBL314. This industrial input/output bus terminator plug is used for all the compatible PLC CPUs which operate in the temperature range of 0 to 55 degrees Celsius (32 to 131 degrees Fahrenheit), even though the plug itself is resistant to even more drastic temperatures. The typical storage temperature for the PLC systems is -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit). The expansion cables used with this plug are 15 meters or 50 feet long and they must be installed as the ultimate cables in the expansion system.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $76cartAdd to Cart

Our highly skilled technicians can repair your IC693ACC307. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $76cartAdd to Cart

Our highly skilled technicians can repair your IC693ACC307. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693ACC307 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693ACC307A
IC693ACC307/A, Series A, Rev A Request Quote

Common misspellings:
  • IC693ACC3o7
  • IC693ACC307
PDF