IC693ACC335 - In Stock | GE Fanuc - GE IP - Emerson Series 90-30

IC693ACC335

IC693ACC335

Revisions: A 
Description:

The GE Fanuc IC693ACC335 board is a digital servo axis terminal board. This terminal board is part of Series 90-30 by GE Fanuc, and it is used to connect DSM connectors to servo amplifiers.

Rated 4.6 with 8 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

In Stock Ships Today

Submit RFQ for IC693ACC335

Add more parts to quote

Description:

The GE Fanuc IC693ACC335 board is a digital servo axis terminal board. This terminal board is part of Series 90-30 by GE Fanuc, and it is used to connect DSM connectors to servo amplifiers.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693ACC335.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 8 reviews

    Technical Specifications for IC693ACC335

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693ACC335
Number of Connectors2
Number of Pins per Connector36
Supported ComponentsPLCs
Product TypeDigital servo axis terminal board
Voltage3 Volts
Storage Temperature Range-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
Servo AmplifiersSupported
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693ACC335
Number of Connectors2
Number of Pins per Connector36
Supported ComponentsPLCs
Product TypeDigital servo axis terminal board
Voltage3 Volts
Storage Temperature Range-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
Servo AmplifiersSupported
s

About IC693ACC335

The IC693ACC335 is a digital servo axis terminal board by GE Fanuc. This terminal board is used to connect DSM connectors A and B to the corresponding connectors on a GE Fanuc digital servo amplifier. Additionally, the servo board provides screw terminal connections for different I/O devices. The GE Fanuc IC693ACC335 terminal board has 2 connectors, and each connector has 36 pins. One of the connectors is labeled as a DSM connector and the users can connect it to the DSM device with a cable. The other connector is labeled as the "SERVO" connector, and the users can connect it to the GE Fanuc digital servo amplifier. The users will need servo command cables like the IC800CBL001 or 002 command cables for this connection to be possible.



 



In the event that a digital servo axis does not need any devices that connect the IC693ACC335 terminal board to the screw terminal board, then users do not need a terminal board cable or a terminal board. In that case, it is possible for the users to directly connect the digital servo command cable from a digital servo amplifier to the DSM faceplate. This can be done through the A or B connectors. It is essential for the users to make sure that they correctly configure the "OT Limit Sw" setting. This setting must be in the "DISABLE" position, otherwise the DSM cannot run. If the IC693ACC335 terminal board is not being used for breaking out the user I/O points like home limit inputs, the users must insert the other end of the cable differently on the front part of the DSM faceplate. The cable must be inserted into Connector A, which is meant for Servo Axis 1 or into Connector B, which is set for Servo Axis 2.



Repair Services for IC693ACC335

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693ACC335. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693ACC335

Please refer to the manual for more information about the IC693ACC335 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693ACC335A
IC693ACC335-A, Series A, Rev A Request Quote
Common misspellings:
  • 1C693ACC335
  • IC693ACC335

Dimensions For IC693ACC335

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693ACC335

Resolutions For IC693ACC335

About

Technical Specifications for IC693ACC335

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693ACC335
Number of Connectors2
Number of Pins per Connector36
Supported ComponentsPLCs
Product TypeDigital servo axis terminal board
Voltage3 Volts
Storage Temperature Range-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
Servo AmplifiersSupported
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693ACC335
Number of Connectors2
Number of Pins per Connector36
Supported ComponentsPLCs
Product TypeDigital servo axis terminal board
Voltage3 Volts
Storage Temperature Range-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
Servo AmplifiersSupported

About IC693ACC335

The IC693ACC335 is a digital servo axis terminal board by GE Fanuc. This terminal board is used to connect DSM connectors A and B to the corresponding connectors on a GE Fanuc digital servo amplifier. Additionally, the servo board provides screw terminal connections for different I/O devices. The GE Fanuc IC693ACC335 terminal board has 2 connectors, and each connector has 36 pins. One of the connectors is labeled as a DSM connector and the users can connect it to the DSM device with a cable. The other connector is labeled as the "SERVO" connector, and the users can connect it to the GE Fanuc digital servo amplifier. The users will need servo command cables like the IC800CBL001 or 002 command cables for this connection to be possible.



 



In the event that a digital servo axis does not need any devices that connect the IC693ACC335 terminal board to the screw terminal board, then users do not need a terminal board cable or a terminal board. In that case, it is possible for the users to directly connect the digital servo command cable from a digital servo amplifier to the DSM faceplate. This can be done through the A or B connectors. It is essential for the users to make sure that they correctly configure the "OT Limit Sw" setting. This setting must be in the "DISABLE" position, otherwise the DSM cannot run. If the IC693ACC335 terminal board is not being used for breaking out the user I/O points like home limit inputs, the users must insert the other end of the cable differently on the front part of the DSM faceplate. The cable must be inserted into Connector A, which is meant for Servo Axis 1 or into Connector B, which is set for Servo Axis 2.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693ACC335. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693ACC335. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693ACC335 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693ACC335A
IC693ACC335/A, Series A, Rev A Request Quote

Common misspellings:
  • IC693ACC335
PDF