Product image is representative; revision or series may vary. Contact us to request a specific version.
IC693ALG390
The GE Fanuc IC693ALG390 is a Series 90-30 module. This module is an analog output module that features Two (2) voltage output channels, that delivers output voltage range of -10 to +10 VDC output signal with resolution of 2.5 mV (1 LSB = 2.5 mV), absolute accuracy of ± 5 mV at 25° C (77° F) and update rate of 5 msec.
-
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
-
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
-
Repairs and exchanges are available for all automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for IC693ALG390
| Manufacturer | GE Fanuc Emerson |
|---|---|
| Product Line | Series 90-30 |
| Part Number | IC693ALG390 |
| Weight | 0.75 lbs (0.34 kg) |
| Range | -10 to +10 Volts |
| Product Lifecycle Status* | Discontinued/Obsolete |
| Product Description | Analog Voltage Output |
| Offset | 1 mV maximum, 0 to 60° C (32° to 140° F) |
| Calibration | Factory calibrated to 2.5 mV per count |
| No of Channels | 2 |
| External Supply Voltage Range | 18 to 30 VDC |
| External Supply Voltage Ripple | 10% |
| Isolation | 1500 Volts RMS field to the logic side |
| Update Rate | 5 ms all channels |
| Resolution | 2.5 mV |
| Accuracy | +/- 5 mV at 25 degrees Celsius |
| Internal Power Consumption | 32 mA at 5 VDC, 120 mA User Supplied 24 VDC |
* The GE Fanuc Emerson IC693ALG390 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693ALG390 units instead of migration.
The IC693ALG390 is a GE series 90-30 Programmable Logic Controller (PLC) module. This module is an analog output module that feature Two (2) output channels capable of providing -10 to +10 VDC voltage output signals. This module is ideally used for automatically and manually controlling closed loop control system as well as transmit signals to receiving and measuring instruments. It may also be used with data loggers.
The IC693ALG390 module has a resolution of 2.5 mV wherein, 2.5 mV is equal to 1 LSB with absolute accuracy of ± 5 mV at 25° C (77° F) and offset of 1 mv maximum, 0 to 60° C (32° to 140° F). This module features an update rate of 5 ms on both channels which is directly affected by the I/O scan time and the structure of the user program. This module also has a built-in isolation between field side and logic side with rating of 1500 VDC.
This module may also be operated by supplying an external voltage supply range of 18 to 30 VDC with nominal supply of +24 VDC, from isolated, +24 VDC on backplane or user supplied voltage source, and +5 VDC from backplane with acceptable voltage ripple of 10%. Acceptable voltage ripple is 10%.
When CPU switches to STOP of RESET mode, this module may be configured to hold last-state value or provide 0VODC output. This configuration is set via the DEF0 jumper located on the removable terminal block. By default, the module is set to holding the last-state of the module.
The IC693ALG390 2-Channel Analog Voltage Output Module provides 2 terminal connectors to use with the user-supplied 24 Volts PLC power supply. This configuration allows the users to supply standby power and save the output values if the internal power supply is interrupted. In order to decrease the load on the PLC, the module voltage also can be supplied externally. There is an LED on the top faceplate of the module which glows when the power supply of the module is operating. The field connections must be wired with shielded instrumentation cables to minimize the capacitive load. It is recommended to connect shield to the Ground (GND) on the user terminal connector block. The IC693ALG390 2-Channel Analog Voltage Output Module also offers electrical isolation. If the CPU goes to the RESET or STOP mode, the module status becomes the default, 0 Volts, or Hold-Last-State status. The configuration jumper known as Jumper DEF0 can be used to select the desired state.
| Revision Part # | Also known as | |
|---|---|---|
| IC693ALG390A | IC693ALG390-A, Series A, Rev A | |
| IC693ALG390C | IC693ALG390-C, Series C, Rev C | |
| IC693ALG390D | IC693ALG390-D, Series D, Rev D | |
| IC693ALG390F | IC693ALG390-F, Series F, Rev F | |
| IC693ALG390G | IC693ALG390-G, Series G, Rev G | |
| IC693ALG390H | IC693ALG390-H, Series H, Rev H | |
| Don't see your particular revision? Contact us now. | ||
- 1C693ALG390
- 1C693ALG39O
- IC693ALG39O
Does the IC693ALG390 come with a warranty?
Yes, the IC693ALG390 includes a free 2-year DO Supply warranty. You can upgrade to a 3-year warranty at checkout for even more protection.
Does the IC693ALG390 support current output signals?
No. The IC693ALG390 only delivers voltage output signal range of -10 to +10VDC.
What is the reaction of the module to sudden STOP or RESET of the CPU?
The IC693ALG390 output channels may be configured to hold last state or downscale to 0VDC.
How many slots that the IC693ALG390 occupy?
The IC693ALG390 occupies only One (1) slot of the backplane.
The IC693ALG390 Analog Voltage Output Module is a 2-channel output module from GE Fanuc. It comes with -10 to +10 Volts of voltage range, 18 to 30 Volts DC of external supply voltage range, and 2.5 millivolts of resolution.