IC693BEM321 - In Stock | GE Fanuc - GE IP - Emerson Series 90-30

IC693BEM321

Rated 5 with 11 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693BEM321

Revisions: B C F G 
Description: The GE Fanuc IC693BEM321 I/O Link Master Module can be connected with up to 16 I/O link slave modules in order to form a proprietary GE Fanuc link for monitoring and controlling complex processes needing a high response velocity. As many as 1024 inputs and 1024 outputs can be handled from a single master module, making it an ideal solution for adding processing power to preloaded GE Fanuc programmable logic controllers.
In Stock Ships Today
Request a quote for IC693BEM321

Description:

The GE Fanuc IC693BEM321 I/O Link Master Module can be connected with up to 16 I/O link slave modules in order to form a proprietary GE Fanuc link for monitoring and controlling complex processes needing a high response velocity. As many as 1024 inputs and 1024 outputs can be handled from a single master module, making it an ideal solution for adding processing power to preloaded GE Fanuc programmable logic controllers.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: B C F G 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693BEM321.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 11 reviews

    Technical Specifications for IC693BEM321

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693BEM321
Module TypeI/O Link Interface
Number of Slots1 (single slot)
Backplane SupportUniversal Backplane
Input Points1024
Output Points1024
Available connector 20-pin Honda socket
PLCs supportedGE Fanuc Series 90-30 and 90-70 series
Max Number of Slaves 16
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693BEM321
Module TypeI/O Link Interface
Number of Slots1 (single slot)
Backplane SupportUniversal Backplane
Input Points1024
Output Points1024
Available connector 20-pin Honda socket
PLCs supportedGE Fanuc Series 90-30 and 90-70 series
Max Number of Slaves 16
s

About IC693BEM321

The GE Fanuc IC693BEM321 I/O Link Master Module Card, as the name suggests, is a serial interface card that links the inputs received from up to 16 slave modules into the GE Fanuc Series 90-30 PLC systems serving as a gateway between those slave modules and the systems' CPUs.  Up to 1K (1024), digital inputs can be received in a single GE Fanuc IC693BEM321 I/O Link Master Module Card, producing 1K of digital outputs to transmit command responses to field actuators. The configuration of this interface card is done through a hand-held GE Fanuc programmer or by using proprietary software.



 



Like the majority of the accessory modules from GE Fanuc, the IC693BEM321 I/O Link Master Module Card can be inserted in any available slot in a GE Fanuc PLC from the Series 90-30 and 90-70 product lines. A total of 6 master modules can be inserted in a GE Fanuc PLC baseplate at the same time, with each of them representing an independent I/O link to control a specific sector or part. The 5 Volts DC power source for the GE Fanuc IC693BEM321 I/O Link Master Module Card is taken directly from the baseplate connection, and the field devices connected in the link must be powered independently. The serial communication protocols RS-422 and RS-485 are supported, using the same 20-pin Honda socket placed at the front side of the module. Three status LEDs are used to reflect the state of operation of the I/O Link Interface Card. A reset button in the module will turn the whole link on and off when pressed and it is used for clearing any faults present in the system.  



Repair Services for IC693BEM321

Type Lead Time Price Action
Repair Service 2-4 weeks $556cartAdd to Cart

Our highly skilled technicians can repair your IC693BEM321. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693BEM321

Please refer to the manual for more information about the IC693BEM321 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693BEM321B
IC693BEM321-B, Series B, Rev B Request Quote
IC693BEM321C
IC693BEM321-C, Series C, Rev C Request Quote
IC693BEM321F
IC693BEM321-F, Series F, Rev F Request Quote
IC693BEM321G
IC693BEM321-G, Series G, Rev G Request Quote
Common misspellings:
  • 1C693BEM321
  • IC6938EM321
  • IC693BEM32l
  • IC693BEM321

Dimensions For IC693BEM321

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693BEM321

Resolutions For IC693BEM321

About

Technical Specifications for IC693BEM321

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693BEM321
Module TypeI/O Link Interface
Number of Slots1 (single slot)
Backplane SupportUniversal Backplane
Input Points1024
Output Points1024
Available connector 20-pin Honda socket
PLCs supportedGE Fanuc Series 90-30 and 90-70 series
Max Number of Slaves 16
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693BEM321
Module TypeI/O Link Interface
Number of Slots1 (single slot)
Backplane SupportUniversal Backplane
Input Points1024
Output Points1024
Available connector 20-pin Honda socket
PLCs supportedGE Fanuc Series 90-30 and 90-70 series
Max Number of Slaves 16

About IC693BEM321

The GE Fanuc IC693BEM321 I/O Link Master Module Card, as the name suggests, is a serial interface card that links the inputs received from up to 16 slave modules into the GE Fanuc Series 90-30 PLC systems serving as a gateway between those slave modules and the systems' CPUs.  Up to 1K (1024), digital inputs can be received in a single GE Fanuc IC693BEM321 I/O Link Master Module Card, producing 1K of digital outputs to transmit command responses to field actuators. The configuration of this interface card is done through a hand-held GE Fanuc programmer or by using proprietary software.



 



Like the majority of the accessory modules from GE Fanuc, the IC693BEM321 I/O Link Master Module Card can be inserted in any available slot in a GE Fanuc PLC from the Series 90-30 and 90-70 product lines. A total of 6 master modules can be inserted in a GE Fanuc PLC baseplate at the same time, with each of them representing an independent I/O link to control a specific sector or part. The 5 Volts DC power source for the GE Fanuc IC693BEM321 I/O Link Master Module Card is taken directly from the baseplate connection, and the field devices connected in the link must be powered independently. The serial communication protocols RS-422 and RS-485 are supported, using the same 20-pin Honda socket placed at the front side of the module. Three status LEDs are used to reflect the state of operation of the I/O Link Interface Card. A reset button in the module will turn the whole link on and off when pressed and it is used for clearing any faults present in the system.  



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $556cartAdd to Cart

Our highly skilled technicians can repair your IC693BEM321. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $556cartAdd to Cart

Our highly skilled technicians can repair your IC693BEM321. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693BEM321 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693BEM321B
IC693BEM321/B, Series B, Rev B Request Quote
IC693BEM321C
IC693BEM321/C, Series C, Rev C Request Quote
IC693BEM321F
IC693BEM321/F, Series F, Rev F Request Quote
IC693BEM321G
IC693BEM321/G, Series G, Rev G Request Quote

Common misspellings:
  • IC6938EM321
  • IC693BEM32l
  • IC693BEM321
PDF