IC693BEM334 - In Stock | GE Fanuc - GE IP - Emerson Series 90-30

IC693BEM334

Rated 4.8 with 10 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693BEM334

Revisions: M 
Description: The GE Fanuc IC693BEM334 Genius Bus Controller provides the connection interface and communication card needed to make a Series 90-30 or Series 90-70 GE Fanuc PLC interact with up to 31 independent Genius Bus networks or branches. Field devices such as 115 Volts AC I/O blocks, DC I/O blocks, relay output blocks, RTD input blocks, and high-speed counter blocks can be connected into the Genius Bus and exchange data with the main PLC.
In Stock Ships Today
Request a quote for IC693BEM334

Description:

The GE Fanuc IC693BEM334 Genius Bus Controller provides the connection interface and communication card needed to make a Series 90-30 or Series 90-70 GE Fanuc PLC interact with up to 31 independent Genius Bus networks or branches. Field devices such as 115 Volts AC I/O blocks, DC I/O blocks, relay output blocks, RTD input blocks, and high-speed counter blocks can be connected into the Genius Bus and exchange data with the main PLC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: M 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693BEM334.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 10 reviews

    Technical Specifications for IC693BEM334

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693BEM334
Type of componentGenius Bus Controller
PLC CompatibilityGE Fanuc 90-30 or 90-70 series
Communication Protocol Supported Genius I/O Bus
Wiring connectionsTo a detachable terminal strip in the module
User configurationHandheld device
Power Supply 5V DC, from PLC backplane
IP RatingIP 20
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693BEM334
Type of componentGenius Bus Controller
PLC CompatibilityGE Fanuc 90-30 or 90-70 series
Communication Protocol Supported Genius I/O Bus
Wiring connectionsTo a detachable terminal strip in the module
User configurationHandheld device
Power Supply 5V DC, from PLC backplane
IP RatingIP 20
s

About IC693BEM334

The GE Fanuc IC693BEM334 Genius Bus Controller is a solid-state module used in a GE Fanuc Series 90-30 or Series 90-70 Programmable Logic Controller (PLC) to provide a gateway for connections with a Genius I/O Bus. It serves as a connection point and communication interface for the Genius I/O hosts to send and receive discrete, analog, or special-purpose signals to the Series 90-30 or 90-70 PLCs to control industrial machinery or application processes. Up to 31 GE Fanuc IC693BEM334 Genius Bus Controllers can be connected to an individual Series 90-30 or 90-70 PLC, with each one forming an independent Genius Bus network or branch that is able to communicate with the PLC but not with another similar networks or branches.



 



Many types of field devices are supported by the GE Fanuc IC693BEM334 Genius Bus Controller, including 115 Volts AC I/O blocks, DC I/O blocks, relay output blocks, RTD input blocks, and high-speed counter blocks. The incoming wiring to the GE Fanuc IC693BEM334 Genius Bus Controller is connected to a detachable terminal strip that is secured to the front side of the module. The user configuration of the module is done through a handheld monitor or HHM, which provides the human-machine interface for the machine language. Depending on the length of the Genius network, 75, 100, 120, or 150-ohm terminal resistors might be needed. An important consideration for installing the GE Fanuc IC693BEM334 Genius Bus Controller is to place it in a temperature-controlled and humidity-controlled environment in order to guarantee the best possible operation of the system.



Repair Services for IC693BEM334

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693BEM334. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693BEM334

Please refer to the manual for more information about the IC693BEM334 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693BEM334M
IC693BEM334-M, Series M, Rev M Request Quote
Common misspellings:
  • 1C693BEM334
  • IC6938EM334
  • IC693BEM33A
  • IC693BEM334

Dimensions For IC693BEM334

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693BEM334

Resolutions For IC693BEM334

About

Technical Specifications for IC693BEM334

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693BEM334
Type of componentGenius Bus Controller
PLC CompatibilityGE Fanuc 90-30 or 90-70 series
Communication Protocol Supported Genius I/O Bus
Wiring connectionsTo a detachable terminal strip in the module
User configurationHandheld device
Power Supply 5V DC, from PLC backplane
IP RatingIP 20
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693BEM334
Type of componentGenius Bus Controller
PLC CompatibilityGE Fanuc 90-30 or 90-70 series
Communication Protocol Supported Genius I/O Bus
Wiring connectionsTo a detachable terminal strip in the module
User configurationHandheld device
Power Supply 5V DC, from PLC backplane
IP RatingIP 20

About IC693BEM334

The GE Fanuc IC693BEM334 Genius Bus Controller is a solid-state module used in a GE Fanuc Series 90-30 or Series 90-70 Programmable Logic Controller (PLC) to provide a gateway for connections with a Genius I/O Bus. It serves as a connection point and communication interface for the Genius I/O hosts to send and receive discrete, analog, or special-purpose signals to the Series 90-30 or 90-70 PLCs to control industrial machinery or application processes. Up to 31 GE Fanuc IC693BEM334 Genius Bus Controllers can be connected to an individual Series 90-30 or 90-70 PLC, with each one forming an independent Genius Bus network or branch that is able to communicate with the PLC but not with another similar networks or branches.



 



Many types of field devices are supported by the GE Fanuc IC693BEM334 Genius Bus Controller, including 115 Volts AC I/O blocks, DC I/O blocks, relay output blocks, RTD input blocks, and high-speed counter blocks. The incoming wiring to the GE Fanuc IC693BEM334 Genius Bus Controller is connected to a detachable terminal strip that is secured to the front side of the module. The user configuration of the module is done through a handheld monitor or HHM, which provides the human-machine interface for the machine language. Depending on the length of the Genius network, 75, 100, 120, or 150-ohm terminal resistors might be needed. An important consideration for installing the GE Fanuc IC693BEM334 Genius Bus Controller is to place it in a temperature-controlled and humidity-controlled environment in order to guarantee the best possible operation of the system.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693BEM334. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693BEM334. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693BEM334 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693BEM334M
IC693BEM334/M, Series M, Rev M Request Quote

Common misspellings:
  • IC6938EM334
  • IC693BEM33A
  • IC693BEM334
PDF