IC693BEM335 - In Stock | GE Fanuc - GE IP - Emerson Series 90-30

IC693BEM335

Rated 5 with 7 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693BEM335

Revisions: AD 
Description: The GE Fanuc IC693BEM335 Ethernet Network Interface Module allows the users to exchange data between the GE Fanuc Series 90-30 PLC and a wide variety of different field devices, such as discrete signals coming from switches and sensors and analog signals from transmitters. It comes with 2 serial ports that allow the connection of FIP buses into the network.
In Stock Ships Today
Request a quote for IC693BEM335

Description:

The GE Fanuc IC693BEM335 Ethernet Network Interface Module allows the users to exchange data between the GE Fanuc Series 90-30 PLC and a wide variety of different field devices, such as discrete signals coming from switches and sensors and analog signals from transmitters. It comes with 2 serial ports that allow the connection of FIP buses into the network.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: AD 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693BEM335.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 7 reviews

    Technical Specifications for IC693BEM335

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693BEM335
Type of componentEthernet Interface
Number of serial ports2
Power supply5 VDC
IP Rating IP 20
Hot-swap operations Not supported
Operating frequency2.5 MHz
Number of Status LEDs3
PLC compatibilityGE Fanuc Series 90-30
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693BEM335
Type of componentEthernet Interface
Number of serial ports2
Power supply5 VDC
IP Rating IP 20
Hot-swap operations Not supported
Operating frequency2.5 MHz
Number of Status LEDs3
PLC compatibilityGE Fanuc Series 90-30
s

About IC693BEM335

The GE Fanuc IC693BEM335 Ethernet Network Interface Module is made for Series 90-30 Programmable Logic Controllers (PLCs) and it enables GE Fanuc industrial controllers to leverage the speed and ease of deployment of the Ethernet network protocol. It operates as a Factory Instrumentation Protocol network device at a 2.5 MHz frequency over Ethernet wiring and circuitry which can handle bigger bandwidths at faster speeds than any other industrial protocols. The GE Fanuc IC693BEM335 Ethernet Network Interface Module allows the users to exchange data between the GE Fanuc Series 90-30 PLCs and a wide variety of different field devices, such as discrete signals coming from switches and sensors or analog signals coming from transmitters.



 



The 5 Volts DC power supply needed for powering the GE Fanuc IC693BEM335 Ethernet Network Interface Module is obtained by plugging the module into a GE Series 90-30 baseplate. This operation should be performed with the PLC in the off state, because hot-swap operations are not allowed. The two 9-pin, D-type, serial ports are located on the front of the GE Fanuc IC693BEM335 Ethernet Network Interface Module for connecting the FIP buses or branches to the Series 90-30 PLCs. Another serial port provided with 15 pins is used for updating the module's firmware through a personal computer running GE Fanuc’s proprietary configuration software. This module is not designed to supply power for the I/O devices connected to the network. Given its low IP rating (IP 20) and the open construction, this GE Fanuc IC693BEM335 Ethernet Network Interface Module should be installed inside a protective panelboard in order to maximize its performance and lifespan.  



Repair Services for IC693BEM335

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693BEM335. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693BEM335

Please refer to the manual for more information about the IC693BEM335 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693BEM335AD
IC693BEM335-AD, Series AD, Rev AD Request Quote
Common misspellings:
  • 1C693BEM335
  • IC6938EM335
  • IC693BEM335

Dimensions For IC693BEM335

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693BEM335

Resolutions For IC693BEM335

About

Technical Specifications for IC693BEM335

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693BEM335
Type of componentEthernet Interface
Number of serial ports2
Power supply5 VDC
IP Rating IP 20
Hot-swap operations Not supported
Operating frequency2.5 MHz
Number of Status LEDs3
PLC compatibilityGE Fanuc Series 90-30
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693BEM335
Type of componentEthernet Interface
Number of serial ports2
Power supply5 VDC
IP Rating IP 20
Hot-swap operations Not supported
Operating frequency2.5 MHz
Number of Status LEDs3
PLC compatibilityGE Fanuc Series 90-30

About IC693BEM335

The GE Fanuc IC693BEM335 Ethernet Network Interface Module is made for Series 90-30 Programmable Logic Controllers (PLCs) and it enables GE Fanuc industrial controllers to leverage the speed and ease of deployment of the Ethernet network protocol. It operates as a Factory Instrumentation Protocol network device at a 2.5 MHz frequency over Ethernet wiring and circuitry which can handle bigger bandwidths at faster speeds than any other industrial protocols. The GE Fanuc IC693BEM335 Ethernet Network Interface Module allows the users to exchange data between the GE Fanuc Series 90-30 PLCs and a wide variety of different field devices, such as discrete signals coming from switches and sensors or analog signals coming from transmitters.



 



The 5 Volts DC power supply needed for powering the GE Fanuc IC693BEM335 Ethernet Network Interface Module is obtained by plugging the module into a GE Series 90-30 baseplate. This operation should be performed with the PLC in the off state, because hot-swap operations are not allowed. The two 9-pin, D-type, serial ports are located on the front of the GE Fanuc IC693BEM335 Ethernet Network Interface Module for connecting the FIP buses or branches to the Series 90-30 PLCs. Another serial port provided with 15 pins is used for updating the module's firmware through a personal computer running GE Fanuc’s proprietary configuration software. This module is not designed to supply power for the I/O devices connected to the network. Given its low IP rating (IP 20) and the open construction, this GE Fanuc IC693BEM335 Ethernet Network Interface Module should be installed inside a protective panelboard in order to maximize its performance and lifespan.  



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693BEM335. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693BEM335. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693BEM335 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693BEM335-AD
IC693BEM335/AD, Series AD, Rev AD Request Quote

Common misspellings:
  • IC6938EM335
  • IC693BEM335
PDF