IC693CBK002

The IC693CBK002 cable kit is a cable kit that has been specially designed to connect high-density modules from GE Series 90-30. This cable kit has been designed and manufactured by GE Fanuc Automation. This specific kit includes 2 cables that are used to connect to the module, and these cables each come with a right-end connector and a left-end connector. The specific connector for these cables is a 24-pin connector and it is used for specific 32-point I/O modules that use the Terminal Block Quick Connect (TBQC) assemblies. Both of the cables included in the GE Fanuc Automation IC693CBK002 cable kit have a length of 1 meter. These cables provide a connection from the module to a connector that is mounted on a terminal block assembly.

The GE Fanuc Automation IC693CBK002 cable kit cables are wired pin-to-pin. Each one of the conductors on the connector of the cable provides a current rating of 1.2 Amps. When using the cable with a 16-point output module, the lower current value of 1.2 Amps needs to be used for the maximum load current rating. With field devices that require a current rating higher than 1.2 Amps, a TBQC assembly must not be used. Instead, the standard terminal board can work efficiently enough on its own. The GE Fanuc Automation IC693CBK002 cable kit cables have 90-degree connectors. Both of these cables are identical and the purpose of having 2 of them is to match the connectors that are required for a 32-point I/O module. The cable connectors can extend 2 inches from the face of the module.