IC693CBL316 - In Stock | GE Fanuc - GE IP - Emerson Series 90-30

IC693CBL316

Rated 5 with 15 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693CBL316

Revisions: A B 
Description: The GE Fanuc IC693CBL316 Serial Cable is for the Series 90-30 CPUs and digital servo modules. It has has a maximum cable length of 3 feet and a 9-pin D-shell connector and a 6-pin RJ-11 connector.
In Stock Ships Today
Request a quote for IC693CBL316

Description:

The GE Fanuc IC693CBL316 Serial Cable is for the Series 90-30 CPUs and digital servo modules. It has has a maximum cable length of 3 feet and a 9-pin D-shell connector and a 6-pin RJ-11 connector.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: A B 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693CBL316.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 15 reviews

    Technical Specifications for IC693CBL316

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL316
DescriptionSerial Cable
Cable Length3.0 Feet
Connector Type9-pin D-shell connector and 6-pin RJ-11 Connector
Application90-30 Series CPU and Digital Servo Modules
Wire ShieldYes
Average Weight2.0 Pounds
Cable HousingYes
Conducting Material28 AWG Size Wire
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL316
DescriptionSerial Cable
Cable Length3.0 Feet
Connector Type9-pin D-shell connector and 6-pin RJ-11 Connector
Application90-30 Series CPU and Digital Servo Modules
Wire ShieldYes
Average Weight2.0 Pounds
Cable HousingYes
Conducting Material28 AWG Size Wire
s

About IC693CBL316

The GE Fanuc IC693CBL316 Serial Interface Cable is a serial cable assembly designed to interconnect CPU modules and digital servo modules like the IC693CMM321, IC693CPU351, IC693CPU352, IC693CPU363 IC693DSM302, and the IC693DSM314 modules with RJ-11 communications ports to a PC serial port. All the CPU firmware upgrades and programmed applications are downloaded to Port 1 of these modules from the Loader software on the PC by using the IC693CBL316 Serial Cable. The IC693CBL316 Serial Cable is also called a “Station Manager Cable” because it can be used to connect Ethernet supported terminals or terminal emulators with Station Manager RS-232 ports for quick access to the Station Manager software over the high-speed Ethernet network without a converter. Other applications include connecting a PC serial port to the RJ-11 faceplate serial port on IC693CPU351, IC693CPU352, and IC693CPU363 CPU modules for programming, configuration, firmware upgrading, and monitoring purposes.



 



The GE Fanuc Series 90-30 IC693CBL316 Serial Interface Cable can also be used to connect a personal computer’s 9-pin serial port to a digital servo module’s 6-pin RJ-11 COMM port (on the rear-end) for downloading motion programs and firmware upgrades. The IC693CBL316 Serial Interface Cable comes as an assembly comprising of a 1-meter (3-foot) serial cable (shielded), a 9-pin D-shell connector, a 6-pin RJ-11 connector, and some installation hardware. The IC693CBL316 Serial Interface Cable has a 9-pin D-shell connector on one end for connecting to the RS-232-compatible port known as Port 1 on the digital servomModules and a 6-pin RJ-11 connector on the other end for connecting to the serial port of a personal computer.



Repair Services for IC693CBL316

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CBL316. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693CBL316

Please refer to the manual for more information about the IC693CBL316 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693CBL316A
IC693CBL316-A, Series A, Rev A Request Quote
IC693CBL316B
IC693CBL316-B, Series B, Rev B Request Quote
Common misspellings:
  • 1C693CBL316
  • IC693C8L316
  • IC693CB1316
  • IC693CBL3l6
  • IC693CBL316

Dimensions For IC693CBL316

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693CBL316

Resolutions For IC693CBL316

About

Technical Specifications for IC693CBL316

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL316
DescriptionSerial Cable
Cable Length3.0 Feet
Connector Type9-pin D-shell connector and 6-pin RJ-11 Connector
Application90-30 Series CPU and Digital Servo Modules
Wire ShieldYes
Average Weight2.0 Pounds
Cable HousingYes
Conducting Material28 AWG Size Wire
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL316
DescriptionSerial Cable
Cable Length3.0 Feet
Connector Type9-pin D-shell connector and 6-pin RJ-11 Connector
Application90-30 Series CPU and Digital Servo Modules
Wire ShieldYes
Average Weight2.0 Pounds
Cable HousingYes
Conducting Material28 AWG Size Wire

About IC693CBL316

The GE Fanuc IC693CBL316 Serial Interface Cable is a serial cable assembly designed to interconnect CPU modules and digital servo modules like the IC693CMM321, IC693CPU351, IC693CPU352, IC693CPU363 IC693DSM302, and the IC693DSM314 modules with RJ-11 communications ports to a PC serial port. All the CPU firmware upgrades and programmed applications are downloaded to Port 1 of these modules from the Loader software on the PC by using the IC693CBL316 Serial Cable. The IC693CBL316 Serial Cable is also called a “Station Manager Cable” because it can be used to connect Ethernet supported terminals or terminal emulators with Station Manager RS-232 ports for quick access to the Station Manager software over the high-speed Ethernet network without a converter. Other applications include connecting a PC serial port to the RJ-11 faceplate serial port on IC693CPU351, IC693CPU352, and IC693CPU363 CPU modules for programming, configuration, firmware upgrading, and monitoring purposes.



 



The GE Fanuc Series 90-30 IC693CBL316 Serial Interface Cable can also be used to connect a personal computer’s 9-pin serial port to a digital servo module’s 6-pin RJ-11 COMM port (on the rear-end) for downloading motion programs and firmware upgrades. The IC693CBL316 Serial Interface Cable comes as an assembly comprising of a 1-meter (3-foot) serial cable (shielded), a 9-pin D-shell connector, a 6-pin RJ-11 connector, and some installation hardware. The IC693CBL316 Serial Interface Cable has a 9-pin D-shell connector on one end for connecting to the RS-232-compatible port known as Port 1 on the digital servomModules and a 6-pin RJ-11 connector on the other end for connecting to the serial port of a personal computer.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CBL316. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CBL316. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693CBL316 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693CBL316A
IC693CBL316/A, Series A, Rev A Request Quote
IC693CBL316B
IC693CBL316/B, Series B, Rev B Request Quote

Common misspellings:
  • IC693C8L316
  • IC693CB1316
  • IC693CBL3l6
  • IC693CBL316
PDF