IC693CBL319 | GE Fanuc - GE IP - Emerson Series 90-30

IC693CBL319

Rated 4.9 with 17 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693CBL319

Description: The GE Fanuc IC693CBL319 I/O Interface Cable is made for the Series 90-30 Series Axis Positioning Modules. It has has a maximum cable length of 3 feet and a 24-pin female connector and a 25-pin D-type terminal block connector.
Available Now
Request a quote for IC693CBL319

Description:

The GE Fanuc IC693CBL319 I/O Interface Cable is made for the Series 90-30 Series Axis Positioning Modules. It has has a maximum cable length of 3 feet and a 24-pin female connector and a 25-pin D-type terminal block connector.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693CBL319.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 17 reviews

    Technical Specifications for IC693CBL319

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL319
Description I/O Interface Cable
Cable Length3.0 Feet
Connector Type24-Pin Female Connector and a 25-Pin D-type Terminal Block
Cable typeWye Type Cable
ApplicationAxis Positioning Modules
Wire Shield Yes
Average Weight2.0 Pounds
Cable HousingYes
Conducting Material 28 AWG Size Wire
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL319
Description I/O Interface Cable
Cable Length3.0 Feet
Connector Type24-Pin Female Connector and a 25-Pin D-type Terminal Block
Cable typeWye Type Cable
ApplicationAxis Positioning Modules
Wire Shield Yes
Average Weight2.0 Pounds
Cable HousingYes
Conducting Material 28 AWG Size Wire
s

About IC693CBL319

The GE Fanuc IC693CBL319 I/O Interface Cable for the GE Axis Modules is a Wye type of interface cable that is designed to interconnect the Motion Mate Axis Modules. This interface cable connects the GE Axis Modules like the IC693APU301 and the IC693APU302 Axis Modules to compatible drives and controllers, and these modules require 2 I/O interface cables like the IC693CBL319 or IC693CBL311 cables to connect to the 2 male 24-pin connectors on the front of each module. The IC693CBL319 I/O Interface Cable is supplied as an assembly consisting of a 24-pin I/O connector, a cable, and a 25-pin D-type terminal block connector. The IC693CBL319 I/O Interface Cable offers 1 meter (3 feet) of maximum cable connection between Axis Modules and other drives or machines.



 



On one end of the IC693CBL319 I/O Interface Cable is a 24-pin female connector for connecting to a 24-pin male Power Mate Module connector, and on the other end of the cable is a 25-pin D-type terminal block connector. To meet specific application needs, the IC693CBL319 I/O Interface Cable can be replaced with the IC693CBL317 (3 meters long) or IC693CBL320 (1 meter long) cables. These cables (the IC693CBL317 and the IC693CBL320 cables) differ from the IC693CBL319 I/O Interface Cable because they come with a drain shield wire that is outside of the cable housing, and they help to improve noise immunity. The IC693CBL319 I/O Interface Cable has I/O connector pins (wires) that are coded from A1 through A12 and from B1 through B12, and the 25-pin terminal block connector pins are coded from 1 through 25.



Repair Services for IC693CBL319

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CBL319. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693CBL319

Please refer to the manual for more information about the IC693CBL319 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
Common misspellings:
  • 1C693CBL319
  • IC693C8L319
  • IC693CB1319
  • IC693CBL3l9
  • IC693CBL319

Dimensions For IC693CBL319

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693CBL319

Resolutions For IC693CBL319

About

Technical Specifications for IC693CBL319

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL319
Description I/O Interface Cable
Cable Length3.0 Feet
Connector Type24-Pin Female Connector and a 25-Pin D-type Terminal Block
Cable typeWye Type Cable
ApplicationAxis Positioning Modules
Wire Shield Yes
Average Weight2.0 Pounds
Cable HousingYes
Conducting Material 28 AWG Size Wire
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL319
Description I/O Interface Cable
Cable Length3.0 Feet
Connector Type24-Pin Female Connector and a 25-Pin D-type Terminal Block
Cable typeWye Type Cable
ApplicationAxis Positioning Modules
Wire Shield Yes
Average Weight2.0 Pounds
Cable HousingYes
Conducting Material 28 AWG Size Wire

About IC693CBL319

The GE Fanuc IC693CBL319 I/O Interface Cable for the GE Axis Modules is a Wye type of interface cable that is designed to interconnect the Motion Mate Axis Modules. This interface cable connects the GE Axis Modules like the IC693APU301 and the IC693APU302 Axis Modules to compatible drives and controllers, and these modules require 2 I/O interface cables like the IC693CBL319 or IC693CBL311 cables to connect to the 2 male 24-pin connectors on the front of each module. The IC693CBL319 I/O Interface Cable is supplied as an assembly consisting of a 24-pin I/O connector, a cable, and a 25-pin D-type terminal block connector. The IC693CBL319 I/O Interface Cable offers 1 meter (3 feet) of maximum cable connection between Axis Modules and other drives or machines.



 



On one end of the IC693CBL319 I/O Interface Cable is a 24-pin female connector for connecting to a 24-pin male Power Mate Module connector, and on the other end of the cable is a 25-pin D-type terminal block connector. To meet specific application needs, the IC693CBL319 I/O Interface Cable can be replaced with the IC693CBL317 (3 meters long) or IC693CBL320 (1 meter long) cables. These cables (the IC693CBL317 and the IC693CBL320 cables) differ from the IC693CBL319 I/O Interface Cable because they come with a drain shield wire that is outside of the cable housing, and they help to improve noise immunity. The IC693CBL319 I/O Interface Cable has I/O connector pins (wires) that are coded from A1 through A12 and from B1 through B12, and the 25-pin terminal block connector pins are coded from 1 through 25.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CBL319. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CBL319. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF