IC693CBL324 - In Stock | GE Fanuc - GE IP - Emerson Series 90-30

IC693CBL324

Rated 4.6 with 16 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693CBL324

Revisions: A B 
Description: The GE Fanuc IC693CBL324 Terminal Board Interface Cable is for the GE Series 90-30 Cable System. It has has a maximum cable length of 3.28 feet and a 36-pin connector.
In Stock Ships Today
Request a quote for IC693CBL324

Description:

The GE Fanuc IC693CBL324 Terminal Board Interface Cable is for the GE Series 90-30 Cable System. It has has a maximum cable length of 3.28 feet and a 36-pin connector.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: A B 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693CBL324.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 16 reviews

    Technical Specifications for IC693CBL324

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL324
Cable Length3.28 Feet
Connector Type36-Pin Connector
Cable typeInterface Cable
ListingThis specification list was created by Do-Supply-Inc.
ApplicationDSM Modules To Digital Servo Axis Terminal Block
Wire ShieldYes
Average Weight2.0 Pounds
Cable HousingYes
Conducting Material28 AWG Size Wire
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL324
Cable Length3.28 Feet
Connector Type36-Pin Connector
Cable typeInterface Cable
ApplicationDSM Modules To Digital Servo Axis Terminal Block
Wire ShieldYes
Average Weight2.0 Pounds
Cable HousingYes
Conducting Material28 AWG Size Wire
s

About IC693CBL324

The GE Fanuc IC693CBL324 Terminal Board Interface Cable is an I/O interface cable assembly for the Series 90-30 PLC Cable System. This cable connects DSM modules to the IC693ACC336 Auxiliary Terminal Board and the IC693ACC355 Axis Terminal Board. The IC693CBL324 Terminal Board Interface Cable offers up to 1 meter (3.28 feet) of cable connectivity with a DSM module and either an axis terminal block or servo axis terminal block. The IC693ACC336 Auxiliary Terminal Board has two 36-pin connectors labelled ”DSM”  and “SERVO” for connecting to DSM modules. The DSM modules also have servo axis connectors A, B, C, and D for digital and analog servo connections. The IC693CBL324 Terminal Board Interface Cable has a 36-pin connector on one end of the cable for connecting to the 36-pin DSM port on the auxiliary terminal board and another 36-pin connector on the other end for connecting to the PL2 connector on the DSM modules.



 



The DSM modules require the IC693ACC355 Axis Terminal Board or the auxiliary terminal board to be connected by either the IC693CBL325 (3 meters long) or the IC693CBL324 (1 meter long) Terminal Board interface Cable to access the servo axis I/O data such as the over travel inputs, the home switch input, or the strobe inputs. Upon installation, if the application requires the use of the IC693ACC335 Axis Terminal Board to access I/O data such as over-travel or home limit inputs, then connect the 36-pin connector end of the IC693CBL324 Terminal Board Interface Cable to the terminal block connector labelled “DSM” on the axis terminal board, and connect the other end of the cable to the connectors labelled “A” for Servo Axis 1, or labelled “B” for Servo Axis 2 on the DSM modules.



Repair Services for IC693CBL324

Type Lead Time Price Action
Repair Service 2-4 weeks $153cartAdd to Cart

Our highly skilled technicians can repair your IC693CBL324. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693CBL324

Please refer to the manual for more information about the IC693CBL324 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693CBL324A
IC693CBL324-A, Series A, Rev A Request Quote
IC693CBL324B
IC693CBL324-B, Series B, Rev B Request Quote
Common misspellings:
  • 1C693CBL324
  • IC693C8L324
  • IC693CB1324
  • IC693CBL32A
  • IC693CBL324

Dimensions For IC693CBL324

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693CBL324

Resolutions For IC693CBL324

About

Technical Specifications for IC693CBL324

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL324
Cable Length3.28 Feet
Connector Type36-Pin Connector
Cable typeInterface Cable
ApplicationDSM Modules To Digital Servo Axis Terminal Block
Wire ShieldYes
Average Weight2.0 Pounds
Cable HousingYes
Conducting Material28 AWG Size Wire
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL324
Cable Length3.28 Feet
Connector Type36-Pin Connector
Cable typeInterface Cable
ApplicationDSM Modules To Digital Servo Axis Terminal Block
Wire ShieldYes
Average Weight2.0 Pounds
Cable HousingYes
Conducting Material28 AWG Size Wire

About IC693CBL324

The GE Fanuc IC693CBL324 Terminal Board Interface Cable is an I/O interface cable assembly for the Series 90-30 PLC Cable System. This cable connects DSM modules to the IC693ACC336 Auxiliary Terminal Board and the IC693ACC355 Axis Terminal Board. The IC693CBL324 Terminal Board Interface Cable offers up to 1 meter (3.28 feet) of cable connectivity with a DSM module and either an axis terminal block or servo axis terminal block. The IC693ACC336 Auxiliary Terminal Board has two 36-pin connectors labelled ”DSM”  and “SERVO” for connecting to DSM modules. The DSM modules also have servo axis connectors A, B, C, and D for digital and analog servo connections. The IC693CBL324 Terminal Board Interface Cable has a 36-pin connector on one end of the cable for connecting to the 36-pin DSM port on the auxiliary terminal board and another 36-pin connector on the other end for connecting to the PL2 connector on the DSM modules.



 



The DSM modules require the IC693ACC355 Axis Terminal Board or the auxiliary terminal board to be connected by either the IC693CBL325 (3 meters long) or the IC693CBL324 (1 meter long) Terminal Board interface Cable to access the servo axis I/O data such as the over travel inputs, the home switch input, or the strobe inputs. Upon installation, if the application requires the use of the IC693ACC335 Axis Terminal Board to access I/O data such as over-travel or home limit inputs, then connect the 36-pin connector end of the IC693CBL324 Terminal Board Interface Cable to the terminal block connector labelled “DSM” on the axis terminal board, and connect the other end of the cable to the connectors labelled “A” for Servo Axis 1, or labelled “B” for Servo Axis 2 on the DSM modules.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $153cartAdd to Cart

Our highly skilled technicians can repair your IC693CBL324. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $153cartAdd to Cart

Our highly skilled technicians can repair your IC693CBL324. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693CBL324 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693CBL324A
IC693CBL324/A, Series A, Rev A Request Quote
IC693CBL324B
IC693CBL324/B, Series B, Rev B Request Quote

Common misspellings:
  • IC693C8L324
  • IC693CB1324
  • IC693CBL32A
  • IC693CBL324
PDF