IC693CBL325 - In Stock | GE Fanuc - GE IP - Emerson Series 90-30

IC693CBL325

Rated 4.6 with 9 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693CBL325

Revisions: A B 
Description: The GE Fanuc IC693CBL325 Terminal Board Interface Cable is designed for the Series 90-30 PLC system. It has has a maximum cable length of 10.0 feet and a 36-pin connector.
In Stock Ships Today
Request a quote for IC693CBL325

Description:

The GE Fanuc IC693CBL325 Terminal Board Interface Cable is designed for the Series 90-30 PLC system. It has has a maximum cable length of 10.0 feet and a 36-pin connector.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: A B 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693CBL325.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 9 reviews

    Technical Specifications for IC693CBL325

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL325
DescriptionTerminal Board Interface Cable
Cable Length10.0 Feet
Connector Type36-Pin Connector
ListingThis specification list was created by Do-Supply-Inc.
Cable typeInterface Cable
ApplicationDSM Modules to Servo Axis Terminal Board
Wire ShieldYes
Average Weight2.0 Pounds
Cable HousingYes
Conducting Material28 AWG Size Wire
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL325
DescriptionTerminal Board Interface Cable
Cable Length10.0 Feet
Connector Type36-Pin Connector
Cable typeInterface Cable
ApplicationDSM Modules to Servo Axis Terminal Board
Wire ShieldYes
Average Weight2.0 Pounds
Cable HousingYes
Conducting Material28 AWG Size Wire
s

About IC693CBL325

The GE Fanuc IC693CBL325 Terminal Board Connector Cable is an I/O cable for the GE Series 90-30 PLC cable system. This cable is supplied as an assembly consisting of a 3-meter-long cable, two 36-pin connectors, and an installation sheet. The IC693CBL325 Terminal Board Connector Cable connects the DSM314 module to a servo axis terminal board or an auxiliary terminal board. The IC693CBL325 Terminal Board Connector Cable can be replaced with the 1-meter long GE Series 90-30 terminal board interface cable that is known as the IC693CBL324 Cable. But unlike the 1-meter IC693CBL324 Terminal Board Interface Cable, the IC693CBL325 Terminal Board Connector Cable provides up to 3 meters (10 feet) of cable for a longer connection distance between the DSM modules (either the IC693DSM302 or IC693DSM314 Module) and the auxiliary terminal block or servo axis terminal board.



 



In the digital mode, the GE IC693ACC335 Digital Servo Axis Terminal Board can be used to connect the DSM module to the GE Fanuc Digital Servo Amplifiers via the 3-meters IC693CBL325 Cable or a 1-meter terminal board interface cable. The IC693ACC335 Digital Servo Axis Terminal Board has two 36-pin connectors labelled as the “DSM” and “SERVO” connectors. During installation, if the operators are using the IC693ACC335 Digital Servo Axis Terminal Board for access to I/O inputs such as the over-travel input or home limit inputs, they should connect the IC693CBL325 Terminal Board cable to the “DSM” connector on the board surface, and at the same time connect the other cable end to either the connector labelled "Servo Axis 1" or "Servo Axis 2" on the DSM module.



Repair Services for IC693CBL325

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CBL325. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693CBL325

Please refer to the manual for more information about the IC693CBL325 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693CBL325A
IC693CBL325-A, Series A, Rev A Request Quote
IC693CBL325B
IC693CBL325-B, Series B, Rev B Request Quote
Common misspellings:
  • 1C693CBL325
  • IC693C8L325
  • IC693CB1325
  • IC693CBL325

Dimensions For IC693CBL325

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693CBL325

Resolutions For IC693CBL325

About

Technical Specifications for IC693CBL325

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL325
DescriptionTerminal Board Interface Cable
Cable Length10.0 Feet
Connector Type36-Pin Connector
Cable typeInterface Cable
ApplicationDSM Modules to Servo Axis Terminal Board
Wire ShieldYes
Average Weight2.0 Pounds
Cable HousingYes
Conducting Material28 AWG Size Wire
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL325
DescriptionTerminal Board Interface Cable
Cable Length10.0 Feet
Connector Type36-Pin Connector
Cable typeInterface Cable
ApplicationDSM Modules to Servo Axis Terminal Board
Wire ShieldYes
Average Weight2.0 Pounds
Cable HousingYes
Conducting Material28 AWG Size Wire

About IC693CBL325

The GE Fanuc IC693CBL325 Terminal Board Connector Cable is an I/O cable for the GE Series 90-30 PLC cable system. This cable is supplied as an assembly consisting of a 3-meter-long cable, two 36-pin connectors, and an installation sheet. The IC693CBL325 Terminal Board Connector Cable connects the DSM314 module to a servo axis terminal board or an auxiliary terminal board. The IC693CBL325 Terminal Board Connector Cable can be replaced with the 1-meter long GE Series 90-30 terminal board interface cable that is known as the IC693CBL324 Cable. But unlike the 1-meter IC693CBL324 Terminal Board Interface Cable, the IC693CBL325 Terminal Board Connector Cable provides up to 3 meters (10 feet) of cable for a longer connection distance between the DSM modules (either the IC693DSM302 or IC693DSM314 Module) and the auxiliary terminal block or servo axis terminal board.



 



In the digital mode, the GE IC693ACC335 Digital Servo Axis Terminal Board can be used to connect the DSM module to the GE Fanuc Digital Servo Amplifiers via the 3-meters IC693CBL325 Cable or a 1-meter terminal board interface cable. The IC693ACC335 Digital Servo Axis Terminal Board has two 36-pin connectors labelled as the “DSM” and “SERVO” connectors. During installation, if the operators are using the IC693ACC335 Digital Servo Axis Terminal Board for access to I/O inputs such as the over-travel input or home limit inputs, they should connect the IC693CBL325 Terminal Board cable to the “DSM” connector on the board surface, and at the same time connect the other cable end to either the connector labelled "Servo Axis 1" or "Servo Axis 2" on the DSM module.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CBL325. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CBL325. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693CBL325 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693CBL325A
IC693CBL325/A, Series A, Rev A Request Quote
IC693CBL325B
IC693CBL325/B, Series B, Rev B Request Quote

Common misspellings:
  • IC693C8L325
  • IC693CB1325
  • IC693CBL325
PDF