IC693CBL329 - In Stock | GE Fanuc - GE IP - Emerson Series 90-30

IC693CBL329

Rated 5 with 19 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693CBL329

Revisions: A B C 
Description: The IC693CBL329 module is a GE Fanuc Automation accessory module. It is compatible with Series 90-30 of the GE PLC devices.
In Stock Ships Today
Request a quote for IC693CBL329

Description:

The IC693CBL329 module is a GE Fanuc Automation accessory module. It is compatible with Series 90-30 of the GE PLC devices.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: A B C 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693CBL329.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 19 reviews

    Technical Specifications for IC693CBL329

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL329
DescriptionI/O cable
Length1 meter
Depth2 inches
UsageConnects a PLC with field devices
Fujitsu I/O ModuleSupported
ColorBlack
I/O Faceplate AdapterSupported
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693CBL329 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693CBL329 units instead of migration.

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL329
DescriptionI/O cable
Length1 meter
Depth2 inches
UsageConnects a PLC with field devices
Fujitsu I/O ModuleSupported
ColorBlack
I/O Faceplate AdapterSupported
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693CBL329 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693CBL329 units instead of migration.

s

About IC693CBL329

The IC693CBL329 cable is a Series 90-30 high-density I/O cable manufactured by GE Fanuc. It is a terminal block quick connect cable equipped with a right angle connector. The main purpose of the cable is to connect the GE PLC devices with field devices. The cable is 1 meter in length and comes with two 24-pin 90-degree left side connectors to ensure a reliable connection. The cable is black in color and is manufactured using high-quality material. It is an unshielded cable with the outer jacket made up of industrial-grade material that gives the cable a long life. During the installation of the IC693CBL329 cable, it should not be bent too much or this may cause damage. It should be kept away from sources of radiation, heat, and direct sunlight. Each connector end of the cable comes with a connection that can be tightened and held firmly.



 



The GE IC693CBL329 cable meets all the relevant environmental, safety, and industrial standards and it is ready for global use. The IC693CBL329 cable is used as a replacement for an older version of the GE connector cable with a straight connector that was formerly used in the GE Fanuc PLC devices. The new cable comes with a bent connector and it needs a bit more installation space than the old straight connector. The connector cable is fully compatible with the I/O faceplate adapter and the connector on the terminal block or with the Fujitsu Style I/O module. The IC693CBL329 cable on the connection end has a depth of 2 inches. The cable can be used with a 32-point I/O module to interface with the Series 90-30 terminal block.



Repair Services for IC693CBL329

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CBL329. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693CBL329

Please refer to the manual for more information about the IC693CBL329 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693CBL329A
IC693CBL329-A, Series A, Rev A Request Quote
IC693CBL329B
IC693CBL329-B, Series B, Rev B Request Quote
IC693CBL329C
IC693CBL329-C, Series C, Rev C Request Quote
Common misspellings:
  • 1C693CBL329
  • IC693C8L329
  • IC693CB1329
  • IC693CBL329

Dimensions For IC693CBL329

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693CBL329

Resolutions For IC693CBL329

About

Technical Specifications for IC693CBL329

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL329
DescriptionI/O cable
Length1 meter
Depth2 inches
UsageConnects a PLC with field devices
Fujitsu I/O ModuleSupported
ColorBlack
I/O Faceplate AdapterSupported
Product Lifecycle Status*Discontinued/Obsolete
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL329
DescriptionI/O cable
Length1 meter
Depth2 inches
UsageConnects a PLC with field devices
Fujitsu I/O ModuleSupported
ColorBlack
I/O Faceplate AdapterSupported
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693CBL329 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693CBL329 units instead of migration.

About IC693CBL329

The IC693CBL329 cable is a Series 90-30 high-density I/O cable manufactured by GE Fanuc. It is a terminal block quick connect cable equipped with a right angle connector. The main purpose of the cable is to connect the GE PLC devices with field devices. The cable is 1 meter in length and comes with two 24-pin 90-degree left side connectors to ensure a reliable connection. The cable is black in color and is manufactured using high-quality material. It is an unshielded cable with the outer jacket made up of industrial-grade material that gives the cable a long life. During the installation of the IC693CBL329 cable, it should not be bent too much or this may cause damage. It should be kept away from sources of radiation, heat, and direct sunlight. Each connector end of the cable comes with a connection that can be tightened and held firmly.



 



The GE IC693CBL329 cable meets all the relevant environmental, safety, and industrial standards and it is ready for global use. The IC693CBL329 cable is used as a replacement for an older version of the GE connector cable with a straight connector that was formerly used in the GE Fanuc PLC devices. The new cable comes with a bent connector and it needs a bit more installation space than the old straight connector. The connector cable is fully compatible with the I/O faceplate adapter and the connector on the terminal block or with the Fujitsu Style I/O module. The IC693CBL329 cable on the connection end has a depth of 2 inches. The cable can be used with a 32-point I/O module to interface with the Series 90-30 terminal block.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CBL329. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CBL329. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693CBL329 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693CBL329A
IC693CBL329/A, Series A, Rev A Request Quote
IC693CBL329B
IC693CBL329/B, Series B, Rev B Request Quote
IC693CBL329C
IC693CBL329/C, Series C, Rev C Request Quote

Common misspellings:
  • IC693C8L329
  • IC693CB1329
  • IC693CBL329
PDF