IC693CBL330 - In Stock | GE Fanuc - GE IP - Emerson Series 90-30

IC693CBL330

Rated 4.5 with 11 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693CBL330

Revisions: B C 
Description: The IC693CBL330 cable is a connector cable by GE Fanuc. It is compatible with I/O faceplate adapter and Fujitsu I/O module.
In Stock Ships Today
Request a quote for IC693CBL330

Description:

The IC693CBL330 cable is a connector cable by GE Fanuc. It is compatible with I/O faceplate adapter and Fujitsu I/O module.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: B C 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693CBL330.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 11 reviews

    Technical Specifications for IC693CBL330

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL330
DescriptionConnector cable
Length 1 meter
UsagePLC Connection with field device
Replacement forCables with Straight Connectors
ColorBlack
HousingIndustrial TPE Material
Connector Depth2 inches
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693CBL330 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693CBL330 units instead of migration.

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL330
DescriptionConnector cable
Length 1 meter
UsagePLC Connection with field device
Replacement forCables with Straight Connectors
ColorBlack
HousingIndustrial TPE Material
Connector Depth2 inches
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693CBL330 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693CBL330 units instead of migration.

s

About IC693CBL330

The IC693CBL330 cable is a right side terminal connect cable from the GE Fanuc family. The cable has one open end and another end that comes with a 24-pin 90-degree connector. The length of the cable is 1 meter. The connector end of the cable comes with a screw tightened to hold the connection firmly. This unshielded cable is housed inside a black industrial TPE material. The IC693CBL330 cable is a Series 90-30 cable and it comes with a right-angle connector that helps to connect the GE compatible PLC devices with different field devices. The cable is certified with several industrial and environmental standards. This Series 90-30 device can be mounted to the baseplate. It can also connect to an expansion baseplate at the same time. The cable can be connected to the RJ 45 port of a personal computer and it supports different baud rates.



 



The GE IC693CBL330 cable replaces the old straight connector that was used to connect PLC devices from GE Fanuc. The modern cable is equipped with a connector with 2 inches of depth that is a bent connector instead of a straight one. This high-density cable is used with PLC devices for industrial automation applications. It meets the different demands of small scale and large scale industries. It can be used with a PLC IC 693 system that uses a 30-Watt power supply system. This flexible cable is easy to install. The installation should take place in an environment with suitable operating temperature and humidity levels. It should be kept away from EMC noise and heat-generating sources. The IC693CBL330 cable is an accessory that supports different PLC devices.



Repair Services for IC693CBL330

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CBL330. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693CBL330

Please refer to the manual for more information about the IC693CBL330 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693CBL330B
IC693CBL330-B, Series B, Rev B Request Quote
IC693CBL330C
IC693CBL330-C, Series C, Rev C Request Quote
Common misspellings:
  • 1C693CBL330
  • IC693C8L330
  • IC693CB1330
  • IC693CBL33o
  • IC693CBL330

Dimensions For IC693CBL330

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693CBL330

Resolutions For IC693CBL330

About

Technical Specifications for IC693CBL330

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL330
DescriptionConnector cable
Length 1 meter
UsagePLC Connection with field device
Replacement forCables with Straight Connectors
ColorBlack
HousingIndustrial TPE Material
Connector Depth2 inches
Product Lifecycle Status*Discontinued/Obsolete
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CBL330
DescriptionConnector cable
Length 1 meter
UsagePLC Connection with field device
Replacement forCables with Straight Connectors
ColorBlack
HousingIndustrial TPE Material
Connector Depth2 inches
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693CBL330 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693CBL330 units instead of migration.

About IC693CBL330

The IC693CBL330 cable is a right side terminal connect cable from the GE Fanuc family. The cable has one open end and another end that comes with a 24-pin 90-degree connector. The length of the cable is 1 meter. The connector end of the cable comes with a screw tightened to hold the connection firmly. This unshielded cable is housed inside a black industrial TPE material. The IC693CBL330 cable is a Series 90-30 cable and it comes with a right-angle connector that helps to connect the GE compatible PLC devices with different field devices. The cable is certified with several industrial and environmental standards. This Series 90-30 device can be mounted to the baseplate. It can also connect to an expansion baseplate at the same time. The cable can be connected to the RJ 45 port of a personal computer and it supports different baud rates.



 



The GE IC693CBL330 cable replaces the old straight connector that was used to connect PLC devices from GE Fanuc. The modern cable is equipped with a connector with 2 inches of depth that is a bent connector instead of a straight one. This high-density cable is used with PLC devices for industrial automation applications. It meets the different demands of small scale and large scale industries. It can be used with a PLC IC 693 system that uses a 30-Watt power supply system. This flexible cable is easy to install. The installation should take place in an environment with suitable operating temperature and humidity levels. It should be kept away from EMC noise and heat-generating sources. The IC693CBL330 cable is an accessory that supports different PLC devices.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CBL330. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CBL330. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693CBL330 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693CBL330B
IC693CBL330/B, Series B, Rev B Request Quote
IC693CBL330C
IC693CBL330/C, Series C, Rev C Request Quote

Common misspellings:
  • IC693C8L330
  • IC693CB1330
  • IC693CBL33o
  • IC693CBL330
PDF