IC693CPU366 | GE Fanuc - GE IP - Emerson Series 90-30

IC693CPU366

IC693CPU366

Revisions: -ALPHA1 BC CD CE 
Description:

The IC693CPU366 CPU module for the GE Fanuc PLC systems comes with integrated Profibus master support. A serial port is also available on the IC693CPU366 module.

Rated 4.6 with 17 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

Available Now

Submit RFQ for IC693CPU366

Add more parts to quote

Description:

The IC693CPU366 CPU module for the GE Fanuc PLC systems comes with integrated Profibus master support. A serial port is also available on the IC693CPU366 module.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: -ALPHA1 BC CD CE 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693CPU366.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 17 reviews

    Technical Specifications for IC693CPU366

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CPU366
Product typeCPU module
Microprocessor80386EX
Profibus masterYes
Serial port1
Voltage input5 Volts DC
Current draw940 milliamps
Operating temperature0 to 60 degrees Celsius
Storage temperature-40 to 85 degrees Celsius
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CPU366
Product typeCPU module
Microprocessor80386EX
Profibus masterYes
Serial port1
Voltage input5 Volts DC
Current draw940 milliamps
Operating temperature0 to 60 degrees Celsius
Storage temperature-40 to 85 degrees Celsius
s

About IC693CPU366

The GE Fanuc IC693CPU366 module is a CPU module with a Profibus master device for the GE Series 90-30 PLC systems. The embedded Profibus master device enables the CPU to send and receive data from the Profibus networks. Connection to the Profibus networks is made through a 9-pin female RS-485 port. The data rates supported for the Profibus networks include 9.6 kbps, 19.2 kbps, 500 kbps, 1.5 Mbps, 3 Mbps, 6 Mbps, and 12 Mbps. The battery life of the module is 10 months at 25 degrees Celsius and it is 5.5 months at 60 degrees Celsius. The IC693CPU366 module can be programmed with the Machine Edition Logic Developer software that is the PLC version 5.0 SP1 or later. For PLC C programing, the PLC C toolkit (version 4 or later) can be used. A serial RS-232 port, accessible through a 9-pin male connector, can be used for firmware upgrades.



 



The current consumption rating of the IC693CPU366 module at 5 Volts DC is 940 milliamps. For optimal performance, the temperature of the air surrounding the IC693CPU366 module should be maintained between 0 and 60 degrees Celsius. The recommended storage temperature range is from -40 to 85 degrees Celsius. The IC693CPU366 module supports a total of 4096 discrete I/O points. The total register memory available on the module is 240 kilobytes. Floating point math support is available through the firmware. The microprocessor on which the IC693CPU366 module is based is the 80386EX microprocessor. A modular CPU such as the IC693CPU366 module consists of a CPU, memory, and associated integrated circuit chips soldered to a circuit board which is mounted in a plug-in module. The IC693CPU366 CPU module is installed in Slot 1 of a PLC baseplate.



Repair Services for IC693CPU366

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CPU366. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693CPU366

Please refer to the manual for more information about the IC693CPU366 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693CPU366-ALPHA1
IC693CPU366-ALPHA1, Series ALPHA1, Rev ALPHA1 Request Quote
IC693CPU366BC
IC693CPU366-BC, Series BC, Rev BC Request Quote
IC693CPU366CD
IC693CPU366-CD, Series CD, Rev CD Request Quote
IC693CPU366CE
IC693CPU366-CE, Series CE, Rev CE Request Quote
Common misspellings:
  • 1C693CPU366
  • IC693CPU366

Dimensions For IC693CPU366

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693CPU366

Resolutions For IC693CPU366

About

Technical Specifications for IC693CPU366

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CPU366
Product typeCPU module
Microprocessor80386EX
Profibus masterYes
Serial port1
Voltage input5 Volts DC
Current draw940 milliamps
Operating temperature0 to 60 degrees Celsius
Storage temperature-40 to 85 degrees Celsius
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693CPU366
Product typeCPU module
Microprocessor80386EX
Profibus masterYes
Serial port1
Voltage input5 Volts DC
Current draw940 milliamps
Operating temperature0 to 60 degrees Celsius
Storage temperature-40 to 85 degrees Celsius

About IC693CPU366

The GE Fanuc IC693CPU366 module is a CPU module with a Profibus master device for the GE Series 90-30 PLC systems. The embedded Profibus master device enables the CPU to send and receive data from the Profibus networks. Connection to the Profibus networks is made through a 9-pin female RS-485 port. The data rates supported for the Profibus networks include 9.6 kbps, 19.2 kbps, 500 kbps, 1.5 Mbps, 3 Mbps, 6 Mbps, and 12 Mbps. The battery life of the module is 10 months at 25 degrees Celsius and it is 5.5 months at 60 degrees Celsius. The IC693CPU366 module can be programmed with the Machine Edition Logic Developer software that is the PLC version 5.0 SP1 or later. For PLC C programing, the PLC C toolkit (version 4 or later) can be used. A serial RS-232 port, accessible through a 9-pin male connector, can be used for firmware upgrades.



 



The current consumption rating of the IC693CPU366 module at 5 Volts DC is 940 milliamps. For optimal performance, the temperature of the air surrounding the IC693CPU366 module should be maintained between 0 and 60 degrees Celsius. The recommended storage temperature range is from -40 to 85 degrees Celsius. The IC693CPU366 module supports a total of 4096 discrete I/O points. The total register memory available on the module is 240 kilobytes. Floating point math support is available through the firmware. The microprocessor on which the IC693CPU366 module is based is the 80386EX microprocessor. A modular CPU such as the IC693CPU366 module consists of a CPU, memory, and associated integrated circuit chips soldered to a circuit board which is mounted in a plug-in module. The IC693CPU366 CPU module is installed in Slot 1 of a PLC baseplate.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CPU366. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693CPU366. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693CPU366 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693CPU366-ALPHA1
IC693CPU366/-ALPHA1, Series -ALPHA1, Rev -ALPHA1 Request Quote
IC693CPU366-BC
IC693CPU366/BC, Series BC, Rev BC Request Quote
IC693CPU366-CD
IC693CPU366/CD, Series CD, Rev CD Request Quote
IC693CPU366-CE
IC693CPU366/CE, Series CE, Rev CE Request Quote

Common misspellings:
  • IC693CPU366
PDF