IC693DNM200 - In Stock | GE Fanuc - GE IP - Emerson Series 90-30

IC693DNM200

Rated 4.8 with 20 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693DNM200

Revisions: AA AB AC BC BD CD 
Description: The IC693DNM200 is a Series 90-30 component that is manufactured by GE Fanuc. This is a single-slot DeviceNet Master Module with One (1) DeviceNet terminal and One (1) RS232 Service port. This module supports standard DeviceNet transmission rates such as 125K, 250K and 500K and capable of 255 input data bytes and 255 output data bytes and capable of accommodating up to 63 DeviceNet slaves.
In Stock Ships Today
Request a quote for IC693DNM200

Description: The IC693DNM200 is a Series 90-30 component that is manufactured by GE Fanuc. This is a single-slot DeviceNet Master Module with One (1) DeviceNet terminal and One (1) RS232 Service port. This module supports standard DeviceNet transmission rates such as 125K, 250K and 500K and capable of 255 input data bytes and 255 output data bytes and capable of accommodating up to 63 DeviceNet slaves.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: AA AB AC BC BD CD 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693DNM200.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 20 reviews

    Technical Specifications for IC693DNM200

BrandGE Fanuc
SeriesSeries 90-30
ManufacturerGE Fanuc
Part NumberIC693DNM200
Product Description DeviceNet Master Module
CompatibilitySeries 90-30, PACSystems RX3i
Communication ports One (1) DeviceNet terminal; One (1) Service port
Supported networkDeviceNet
Communication speed 125K, 250K and 500K
Supported data rates125K, 250K and 500K Baud
Module locationAny slot of Series 90-30 except slots 0 and 1
Rated voltage12 to 24 Volts DC, positive logic
Module Width Single slot
ON-state voltage drop0.3 Volts DC
No. of slaves up to 63 DeviceNet slaves
ON / OFF response times0.5 milliseconds (maximum)
No. of I/O connection per slave Two (2) I/O connection per slave
Number of outputs32
Data transfer per slave 255 Input Bytes / 255 Output Bytes
Inrush current5.4 Amps for 10 milliseconds
Data transfer to Master 3972 Input Bytes / 3972 Output Bytes
Output current0.5 Amps per point
ConnectionPoll, Strobe, Cyclic and COS I/O
Backplane current consumption450 milliAmps at 5 Volts DC (typical)
Operating temperature0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Backplane Current draw 450mA at 5VDC (typical)
Storage temperature-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
BrandGE Fanuc
SeriesSeries 90-30
ManufacturerGE Fanuc
Part NumberIC693DNM200
Product Description DeviceNet Master Module
CompatibilitySeries 90-30, PACSystems RX3i
Communication ports One (1) DeviceNet terminal; One (1) Service port
Supported networkDeviceNet
Communication speed 125K, 250K and 500K
Supported data rates125K, 250K and 500K Baud
Module locationAny slot of Series 90-30 except slots 0 and 1
Rated voltage12 to 24 Volts DC, positive logic
Module Width Single slot
ON-state voltage drop0.3 Volts DC
No. of slaves up to 63 DeviceNet slaves
ON / OFF response times0.5 milliseconds (maximum)
No. of I/O connection per slave Two (2) I/O connection per slave
Number of outputs32
Data transfer per slave 255 Input Bytes / 255 Output Bytes
Inrush current5.4 Amps for 10 milliseconds
Data transfer to Master 3972 Input Bytes / 3972 Output Bytes
Output current0.5 Amps per point
ConnectionPoll, Strobe, Cyclic and COS I/O
Backplane current consumption450 milliAmps at 5 Volts DC (typical)
Operating temperature0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Backplane Current draw 450mA at 5VDC (typical)
Storage temperature-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
s

About IC693DNM200

The IC693DNM200 is a DeviceNet Master Module. This module is a single slot communication module that is part of the Series 90-30 Programmable Logic Controller (PLC) platform being manufactured by formerly by GE Fanuc, now under Emerson Automation. This module is provided with a single DeviceNet terminal. It also has One (1) RS232 9-pin D shell female port that is used as module service port.

The IC693DNM200 supports all data rates of DeviceNet protocol particularly, 125K, 250K and 500K transmission rates. Up to 255 Bytes of input data and 255 Bytes of output data can be transferred by the master per slave device and up to 3972 bytes of input data and 3972 Bytes of output data can be transferred to this master module. Additionally, a total of 126 I/O connections can be established using this module as it is capable of communicating up to 63 slave devices, where each slave assignable with up to Two (2) I/O station. The module’s supported and configurable data connection are Polled, Strobe, Cyclic or COS. Explicit messaging, Unconnected Message Manager (UCMM) and One (1) Proxy connection per slave unit is also supported by this DeviceNet Master Module.

In addition, this module can operate in dual mode, as Master and Slave simultaneously. Fault behavior specifically during communication loss can be configured to provide acceptable system reaction in the event of the said error. This module also comes with an upgradeable firmware, allowing module updates and bug fixes to be downloaded via the RS232 service port.

The IC693DNM200 module is a DeviceNet master module that is designed and manufactured by GE Fanuc. The unit is part of Series 90-30 and it has a variety of integrated functions for messaging and data transfer applications. Most of these functions are automatic and the unit works on a DeviceNet network that includes other devices and a host computer. The IC693DNM200 module can be mounted on the main rack of Series 90-30 or PACSystems RX3i systems but it does not fit into remote or expansion racks. The IC693DNM200 DeviceNet module has 32 output points and it supports standard data rates like 125K,250K, and 500K Baud. The outputs are arranged in groups of 4 and every group covers 8 points. The unit has a rated voltage of 12 to 24 Volts DC (positive logic) and its backplane consumes a current of 450 milliAmps at 5 Volts DC.

The output current of the GE Series 90-30 DeviceNet IC693DNM200 module is 0.5 Amps per point while its inrush current is 5.4 Amps for the duration of 10 milliseconds. For the output current, it should be noted that the ultimate output current per group is 4 Amps while output current per group common pin is not more than 3 Amps. In addition to that, the ON-state voltage drop is 0.3 Volts DC while the ON/OFF response time is not more than 0.5 milliseconds. The IC693DNM200 module is very reliable and it operates within the temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). In addition to that, the specified storage temperature range of the unit is -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit).

FAQ for IC693DNM200

1. What are the communication rates supported by the IC693DNM200?


The IC693DNM200 supports 125K, 250K and 500K transmission rates.

2. How many slots does the IC693DNM200 occupy in the baseplate?


The IC693DNM200 occupies a single slot only.

3. How many DeviceNet slaves can be connected to the IC693DNM200?


The IC693DNM200 can be connected to up to 63 slave nodes.

Technical Description of IC693DNM200

The GE Fanuc IC693DNM200 module is a DeviceNet component from Series 90-30. The module has 32 outputs and a rated voltage of 12 to 24 Volts DC. The unit has a typical backplane current consumption rating of 450 milliAmps at 5 Volts DC and an inrush current rating of 5.4 Amps for the duration of 10 milliseconds.

Repair Services for IC693DNM200

Type Lead Time Price Action
Repair Service 2-4 weeks $951cartAdd to Cart

Our highly skilled technicians can repair your IC693DNM200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693DNM200

Please refer to the manual for more information about the IC693DNM200 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693DNM200AA
IC693DNM200-AA, Series AA, Rev AA Request Quote
IC693DNM200AB
IC693DNM200-AB, Series AB, Rev AB Request Quote
IC693DNM200AC
IC693DNM200-AC, Series AC, Rev AC Request Quote
IC693DNM200BC
IC693DNM200-BC, Series BC, Rev BC Request Quote
IC693DNM200BD
IC693DNM200-BD, Series BD, Rev BD Request Quote
IC693DNM200CD
IC693DNM200-CD, Series CD, Rev CD Request Quote
Common misspellings:
  • 1C693DNM200
  • IC693DNM2o0
  • IC693DNM20o
  • IC693DNM200

Reviews for IC693DNM200

Product Review

"The IC693DNM200 is a DeviceNet master module from GE Fanuc (formerly) now, Emerson Automation. This module enables connection to DeviceNet networks and support the standard communication rates such as 125K, 250K and 500K transmission speeds. Though this module supports a mature industrial network, it comes with an upgradable firmware, allowing enhancements and bug fixes to be downloaded to this module. " -DO Supply Tech

Dimensions For IC693DNM200

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693DNM200

Resolutions For IC693DNM200

About

Technical Specifications for IC693DNM200

BrandGE Fanuc
SeriesSeries 90-30
ManufacturerGE Fanuc
Part NumberIC693DNM200
Product Description DeviceNet Master Module
CompatibilitySeries 90-30, PACSystems RX3i
Communication ports One (1) DeviceNet terminal; One (1) Service port
Supported networkDeviceNet
Communication speed 125K, 250K and 500K
Supported data rates125K, 250K and 500K Baud
Module locationAny slot of Series 90-30 except slots 0 and 1
Rated voltage12 to 24 Volts DC, positive logic
Module Width Single slot
ON-state voltage drop0.3 Volts DC
No. of slaves up to 63 DeviceNet slaves
ON / OFF response times0.5 milliseconds (maximum)
No. of I/O connection per slave Two (2) I/O connection per slave
Number of outputs32
Data transfer per slave 255 Input Bytes / 255 Output Bytes
Inrush current5.4 Amps for 10 milliseconds
Data transfer to Master 3972 Input Bytes / 3972 Output Bytes
Output current0.5 Amps per point
ConnectionPoll, Strobe, Cyclic and COS I/O
Backplane current consumption450 milliAmps at 5 Volts DC (typical)
Operating temperature0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Backplane Current draw 450mA at 5VDC (typical)
Storage temperature-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)
BrandGE Fanuc
SeriesSeries 90-30
ManufacturerGE Fanuc
Part NumberIC693DNM200
Product Description DeviceNet Master Module
CompatibilitySeries 90-30, PACSystems RX3i
Communication ports One (1) DeviceNet terminal; One (1) Service port
Supported networkDeviceNet
Communication speed 125K, 250K and 500K
Supported data rates125K, 250K and 500K Baud
Module locationAny slot of Series 90-30 except slots 0 and 1
Rated voltage12 to 24 Volts DC, positive logic
Module Width Single slot
ON-state voltage drop0.3 Volts DC
No. of slaves up to 63 DeviceNet slaves
ON / OFF response times0.5 milliseconds (maximum)
No. of I/O connection per slave Two (2) I/O connection per slave
Number of outputs32
Data transfer per slave 255 Input Bytes / 255 Output Bytes
Inrush current5.4 Amps for 10 milliseconds
Data transfer to Master 3972 Input Bytes / 3972 Output Bytes
Output current0.5 Amps per point
ConnectionPoll, Strobe, Cyclic and COS I/O
Backplane current consumption450 milliAmps at 5 Volts DC (typical)
Operating temperature0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit)
Backplane Current draw 450mA at 5VDC (typical)
Storage temperature-40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit)

About IC693DNM200

The IC693DNM200 is a DeviceNet Master Module. This module is a single slot communication module that is part of the Series 90-30 Programmable Logic Controller (PLC) platform being manufactured by formerly by GE Fanuc, now under Emerson Automation. This module is provided with a single DeviceNet terminal. It also has One (1) RS232 9-pin D shell female port that is used as module service port.

The IC693DNM200 supports all data rates of DeviceNet protocol particularly, 125K, 250K and 500K transmission rates. Up to 255 Bytes of input data and 255 Bytes of output data can be transferred by the master per slave device and up to 3972 bytes of input data and 3972 Bytes of output data can be transferred to this master module. Additionally, a total of 126 I/O connections can be established using this module as it is capable of communicating up to 63 slave devices, where each slave assignable with up to Two (2) I/O station. The module’s supported and configurable data connection are Polled, Strobe, Cyclic or COS. Explicit messaging, Unconnected Message Manager (UCMM) and One (1) Proxy connection per slave unit is also supported by this DeviceNet Master Module.

In addition, this module can operate in dual mode, as Master and Slave simultaneously. Fault behavior specifically during communication loss can be configured to provide acceptable system reaction in the event of the said error. This module also comes with an upgradeable firmware, allowing module updates and bug fixes to be downloaded via the RS232 service port.

The IC693DNM200 module is a DeviceNet master module that is designed and manufactured by GE Fanuc. The unit is part of Series 90-30 and it has a variety of integrated functions for messaging and data transfer applications. Most of these functions are automatic and the unit works on a DeviceNet network that includes other devices and a host computer. The IC693DNM200 module can be mounted on the main rack of Series 90-30 or PACSystems RX3i systems but it does not fit into remote or expansion racks. The IC693DNM200 DeviceNet module has 32 output points and it supports standard data rates like 125K,250K, and 500K Baud. The outputs are arranged in groups of 4 and every group covers 8 points. The unit has a rated voltage of 12 to 24 Volts DC (positive logic) and its backplane consumes a current of 450 milliAmps at 5 Volts DC.

The output current of the GE Series 90-30 DeviceNet IC693DNM200 module is 0.5 Amps per point while its inrush current is 5.4 Amps for the duration of 10 milliseconds. For the output current, it should be noted that the ultimate output current per group is 4 Amps while output current per group common pin is not more than 3 Amps. In addition to that, the ON-state voltage drop is 0.3 Volts DC while the ON/OFF response time is not more than 0.5 milliseconds. The IC693DNM200 module is very reliable and it operates within the temperature range of 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit). In addition to that, the specified storage temperature range of the unit is -40 to 85 degrees Celsius (-40 to 185 degrees Fahrenheit).

FAQ for IC693DNM200

1. What are the communication rates supported by the IC693DNM200?


The IC693DNM200 supports 125K, 250K and 500K transmission rates.

2. How many slots does the IC693DNM200 occupy in the baseplate?


The IC693DNM200 occupies a single slot only.

3. How many DeviceNet slaves can be connected to the IC693DNM200?


The IC693DNM200 can be connected to up to 63 slave nodes.

Technical Description of IC693DNM200

The GE Fanuc IC693DNM200 module is a DeviceNet component from Series 90-30. The module has 32 outputs and a rated voltage of 12 to 24 Volts DC. The unit has a typical backplane current consumption rating of 450 milliAmps at 5 Volts DC and an inrush current rating of 5.4 Amps for the duration of 10 milliseconds.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $951cartAdd to Cart

Our highly skilled technicians can repair your IC693DNM200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $951cartAdd to Cart

Our highly skilled technicians can repair your IC693DNM200. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693DNM200 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693DNM200-AA
IC693DNM200/AA, Series AA, Rev AA Request Quote
IC693DNM200-AB
IC693DNM200/AB, Series AB, Rev AB Request Quote
IC693DNM200-AC
IC693DNM200/AC, Series AC, Rev AC Request Quote
IC693DNM200-BC
IC693DNM200/BC, Series BC, Rev BC Request Quote
IC693DNM200-BD
IC693DNM200/BD, Series BD, Rev BD Request Quote
IC693DNM200-CD
IC693DNM200/CD, Series CD, Rev CD Request Quote

Common misspellings:
  • IC693DNM2o0
  • IC693DNM20o
  • IC693DNM200
PDF
Reviews

Reviews for IC693DNM200

Product Review

"The IC693DNM200 is a DeviceNet master module from GE Fanuc (formerly) now, Emerson Automation. This module enables connection to DeviceNet networks and support the standard communication rates such as 125K, 250K and 500K transmission speeds. Though this module supports a mature industrial network, it comes with an upgradable firmware, allowing enhancements and bug fixes to be downloaded to this module. " -DO Supply Tech