IC693MAR590 | GE Fanuc - GE IP - Emerson Series 90-30

IC693MAR590

Rated 4.8 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693MAR590

Revisions: B C 
Description: The IC693MAR590 moudle is a GE Fanuc input/relay output module that has an input voltage of 120 Volts AC. The unit has 8 input channels and 8 output channels. The module is compatible with PLC components from GE Series 90-30 and it features inputs that are grouped together along with 2 groups of output points.
Available Now
Request a quote for IC693MAR590

Description:

The IC693MAR590 moudle is a GE Fanuc input/relay output module that has an input voltage of 120 Volts AC. The unit has 8 input channels and 8 output channels. The module is compatible with PLC components from GE Series 90-30 and it features inputs that are grouped together along with 2 groups of output points.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: B C 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693MAR590.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 6 reviews

    Technical Specifications for IC693MAR590

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693MAR590
Number of channels8 inputs/8 outputs
Rated input voltage0 to 132 Volts AC
Rated output voltage5 to 30 Volts DC / 5 to 250 Volts AC
Isolation voltage1500 Volts RMS between field and logic side / 500 Volts RMS between inputs
Maximum output load2 Amps
Maximum inrush5 Amps
Response time15 milliseconds
Power consumption80 milliAmps from 5 Volts DC / 70 milli Amps from relay 24 Volts DC
ON-state voltage74 to 132 Volts AC
OFF-state voltage0 to 20 Volts AC
ON-state current6 milliAmps
OFF-state current2.2 milliAmps for the duration of 30 milliseconds
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693MAR590
Number of channels8 inputs/8 outputs
Rated input voltage0 to 132 Volts AC
Rated output voltage5 to 30 Volts DC / 5 to 250 Volts AC
Isolation voltage1500 Volts RMS between field and logic side / 500 Volts RMS between inputs
Maximum output load2 Amps
Maximum inrush5 Amps
Response time15 milliseconds
Power consumption80 milliAmps from 5 Volts DC / 70 milli Amps from relay 24 Volts DC
ON-state voltage74 to 132 Volts AC
OFF-state voltage0 to 20 Volts AC
ON-state current6 milliAmps
OFF-state current2.2 milliAmps for the duration of 30 milliseconds
s

About IC693MAR590

The GE Series 90-30 IC693MAR590 industrial module is designed for use with the GE Series 90-30 programmable logic controllers and it provides 8 input points along with 8 output points. This input and relay output module is made by GE Fanuc and it operates on an input voltage range of 0 to 132 Volts AC. In addition to that, the unit has a rated output voltage of 5 to 30 Volts DC or 5 to 250 Volts AC. The IC693MAR590 module provides features like load device control, LED indicators, control of the circuit wiring and identification, support for either a 5-slot or 10-slot baseplate, a response time of 15 milliseconds, and many more.



 



The 120 Volts AC IC693MAR590 module has an isolation voltage of 1500 Volts RMS between the field and logic side and 500 Volts RMS between inputs. The maximum inrush current  of the module is 5 Amps and its maximum output load is 2 Amps. The maximum power consumption rating is 80 milliAmps of current at 5 Volts DC and 70 milliAmps of relay current of 24 Volts DC. In addition to that, the IC693MAR590 module has an on-state voltage of 74 to 132 Volts AC and an off-state voltage of 0 to 20 Volts AC. The on-state current is 6 milliAmps while the off-state current is 2.2 milliAmps for 30 milliseconds. The high-voltage IC693MAR590 module is equipped with a protective door that holds a card for data recording. The module can be installed into any I/O slot and it can be used to control switches, buttons, and limit switches. The typical response when the module is turned on is 30 milliseconds, and it is 45 milliseconds when the module is turned off.    



Repair Services for IC693MAR590

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693MAR590. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693MAR590

Please refer to the manual for more information about the IC693MAR590 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693MAR590B
IC693MAR590-B, Series B, Rev B Request Quote
IC693MAR590C
IC693MAR590-C, Series C, Rev C Request Quote
Common misspellings:
  • 1C693MAR590
  • IC693MAR59o
  • IC693MAR590

Dimensions For IC693MAR590

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693MAR590

Resolutions For IC693MAR590

About

Technical Specifications for IC693MAR590

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693MAR590
Number of channels8 inputs/8 outputs
Rated input voltage0 to 132 Volts AC
Rated output voltage5 to 30 Volts DC / 5 to 250 Volts AC
Isolation voltage1500 Volts RMS between field and logic side / 500 Volts RMS between inputs
Maximum output load2 Amps
Maximum inrush5 Amps
Response time15 milliseconds
Power consumption80 milliAmps from 5 Volts DC / 70 milli Amps from relay 24 Volts DC
ON-state voltage74 to 132 Volts AC
OFF-state voltage0 to 20 Volts AC
ON-state current6 milliAmps
OFF-state current2.2 milliAmps for the duration of 30 milliseconds
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693MAR590
Number of channels8 inputs/8 outputs
Rated input voltage0 to 132 Volts AC
Rated output voltage5 to 30 Volts DC / 5 to 250 Volts AC
Isolation voltage1500 Volts RMS between field and logic side / 500 Volts RMS between inputs
Maximum output load2 Amps
Maximum inrush5 Amps
Response time15 milliseconds
Power consumption80 milliAmps from 5 Volts DC / 70 milli Amps from relay 24 Volts DC
ON-state voltage74 to 132 Volts AC
OFF-state voltage0 to 20 Volts AC
ON-state current6 milliAmps
OFF-state current2.2 milliAmps for the duration of 30 milliseconds

About IC693MAR590

The GE Series 90-30 IC693MAR590 industrial module is designed for use with the GE Series 90-30 programmable logic controllers and it provides 8 input points along with 8 output points. This input and relay output module is made by GE Fanuc and it operates on an input voltage range of 0 to 132 Volts AC. In addition to that, the unit has a rated output voltage of 5 to 30 Volts DC or 5 to 250 Volts AC. The IC693MAR590 module provides features like load device control, LED indicators, control of the circuit wiring and identification, support for either a 5-slot or 10-slot baseplate, a response time of 15 milliseconds, and many more.



 



The 120 Volts AC IC693MAR590 module has an isolation voltage of 1500 Volts RMS between the field and logic side and 500 Volts RMS between inputs. The maximum inrush current  of the module is 5 Amps and its maximum output load is 2 Amps. The maximum power consumption rating is 80 milliAmps of current at 5 Volts DC and 70 milliAmps of relay current of 24 Volts DC. In addition to that, the IC693MAR590 module has an on-state voltage of 74 to 132 Volts AC and an off-state voltage of 0 to 20 Volts AC. The on-state current is 6 milliAmps while the off-state current is 2.2 milliAmps for 30 milliseconds. The high-voltage IC693MAR590 module is equipped with a protective door that holds a card for data recording. The module can be installed into any I/O slot and it can be used to control switches, buttons, and limit switches. The typical response when the module is turned on is 30 milliseconds, and it is 45 milliseconds when the module is turned off.    



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693MAR590. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693MAR590. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693MAR590 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693MAR590B
IC693MAR590/B, Series B, Rev B Request Quote
IC693MAR590C
IC693MAR590/C, Series C, Rev C Request Quote

Common misspellings:
  • IC693MAR59o
  • IC693MAR590
PDF