IC693MDL635 - In Stock | GE Fanuc - GE IP - Emerson Series 90-30

IC693MDL635

IC693MDL635

Description:

The GE Fanuc IC693MDL635 positive/negative logic input module enables a PLC to connect to external devices. It has 16 different inputs and it operates with a voltage of up to 150 Volts DC.

Rated 4.7 with 11 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

In Stock Ships Today

Submit RFQ for IC693MDL635

Add more parts to quote

Description:

The GE Fanuc IC693MDL635 positive/negative logic input module enables a PLC to connect to external devices. It has 16 different inputs and it operates with a voltage of up to 150 Volts DC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693MDL635.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 11 reviews

    Technical Specifications for IC693MDL635

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693MDL635
TypeInput module
LogicNegative/Positive
Rated voltage125 VDC
Input Voltage0-150 VDC
Inputs16
Isolation250 VAC continuous
Input current1.97 mA at rated voltage
Power Consumption5-125 V
MountingRX3i System
LEDs16
Response time8 ms typical
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693MDL635
TypeInput module
LogicNegative/Positive
Rated voltage125 VDC
Input Voltage0-150 VDC
Inputs16
Isolation250 VAC continuous
Input current1.97 mA at rated voltage
Power Consumption5-125 V
MountingRX3i System
LEDs16
Response time8 ms typical
s

About IC693MDL635

The Series 90-30 IC693MDL635 module is a positive/negative logic input module that has been designed and manufactured by GE Fanuc. This module provides 16 input points that have a common power input terminal. The module comes with an operating voltage of 125 Volts DC and it can be wired for both positive and negative logic. The GE Fanuc Series 90-30 IC693MDL635 positive/negative logic input module can be installed in any I/O slot in an RX3i system. This module has been included in GE Series 90-30 and it is compatible with different devices included in the same series. The input current of these modules goes up to 1.97 milliamps at the rated voltage. The on-state inputs have a voltage range of 90 to 150 Volts DC and the off-state inputs have a voltage of up to 30 Volts DC. The response time is 8 milliseconds when the device is on and when it is off.





The GE Fanuc Series 90-30 IC693MDL635 positive/negative logic input module has an input voltage rating of up to 150 Volts DC and an isolation voltage rating of 250 Volts AC. The module comes with a power consumption of 5 to 125 Volts. The module also provides 16 green LEDs and red bands on the labels that indicate the status of each one of the 16 input points. The GE Fanuc IC693MDL635 positive/negative logic input module's main purpose is to provide an interface between a PLC and different external input devices such as sensors and switches, among others. These modules also support connections with external output devices such as contactors and displays.



Repair Services for IC693MDL635

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693MDL635. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693MDL635

Please refer to the manual for more information about the IC693MDL635 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
Common misspellings:
  • 1C693MDL635
  • IC693MD1635
  • IC693MDL635

Dimensions For IC693MDL635

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693MDL635

Resolutions For IC693MDL635

About

Technical Specifications for IC693MDL635

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693MDL635
TypeInput module
LogicNegative/Positive
Rated voltage125 VDC
Input Voltage0-150 VDC
Inputs16
Isolation250 VAC continuous
Input current1.97 mA at rated voltage
Power Consumption5-125 V
MountingRX3i System
LEDs16
Response time8 ms typical
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693MDL635
TypeInput module
LogicNegative/Positive
Rated voltage125 VDC
Input Voltage0-150 VDC
Inputs16
Isolation250 VAC continuous
Input current1.97 mA at rated voltage
Power Consumption5-125 V
MountingRX3i System
LEDs16
Response time8 ms typical

About IC693MDL635

The Series 90-30 IC693MDL635 module is a positive/negative logic input module that has been designed and manufactured by GE Fanuc. This module provides 16 input points that have a common power input terminal. The module comes with an operating voltage of 125 Volts DC and it can be wired for both positive and negative logic. The GE Fanuc Series 90-30 IC693MDL635 positive/negative logic input module can be installed in any I/O slot in an RX3i system. This module has been included in GE Series 90-30 and it is compatible with different devices included in the same series. The input current of these modules goes up to 1.97 milliamps at the rated voltage. The on-state inputs have a voltage range of 90 to 150 Volts DC and the off-state inputs have a voltage of up to 30 Volts DC. The response time is 8 milliseconds when the device is on and when it is off.





The GE Fanuc Series 90-30 IC693MDL635 positive/negative logic input module has an input voltage rating of up to 150 Volts DC and an isolation voltage rating of 250 Volts AC. The module comes with a power consumption of 5 to 125 Volts. The module also provides 16 green LEDs and red bands on the labels that indicate the status of each one of the 16 input points. The GE Fanuc IC693MDL635 positive/negative logic input module's main purpose is to provide an interface between a PLC and different external input devices such as sensors and switches, among others. These modules also support connections with external output devices such as contactors and displays.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693MDL635. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693MDL635. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF