Product image is representative; revision or series may vary. Contact us to request a specific version.
IC693MDL645
The GE Fanuc IC693MDL645 is a Series 90-30 module. This module is a positive / negative logic input module that features Sixteen (16) input channels with operating voltage range of 0-30VDC. This module has an input current rating of 7 mA with One (1) input group.
-
We sell industrial automation parts backed by our free 2-Year DO Supply Warranty.
-
Same-day domestic and fast international shipping with UPS, FedEx, DHL, and more.
-
AMEX, Visa, MasterCard, Discover, wire transfer, net terms, and more.
-
Repairs and exchanges are available for all automation products.
- Reseller Options
Drop shipping, blind shipping, and account shipping with no extra fees.
Technical specifications for IC693MDL645
| Manufacturer | GE Fanuc Emerson |
|---|---|
| Product Line | Series 90-30 |
| Part Number | IC693MDL645 |
| Weight | 0.69 lbs (0.31 kg) |
| Internal Power Used | 80 mA at 5 VDC, 125 mA at 24 VDC Isolated |
| Module type | Positive / Negative Discrete input |
| Input Voltage Range | 0-30 VDC |
| Nominal Input voltage | 24VDC |
| Input Current (mA) | 7 mA |
| Number of points | Sixteen (16) |
| Module width | Single (1) slot |
| Connector Type | Terminal Block (20 screws), included with module. |
| Compatible baseplate | Series 90-30 5-slot or 10 slot baseplate |
| LED indicators | Sixteen (16) LED indicators (1 per channel) |
| Power Type | DC |
| Response Time (ms) | 7 ms on, 7 ms off |
| Product Lifecycle Status* | Discontinued/Obsolete |
* The GE Fanuc Emerson IC693MDL645 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693MDL645 units instead of migration.
The GE Fanuc module with part number IC693MDL645 is a Series 90-30 Positive / Negative logic input module. This module is used to interface input devices such as pushbuttons, limit switches, proximity switches, auxiliary contacts and other similar devices.
The IC693MDL645 is provided with a single input group, having One (1) common terminal. It can accept external voltage signals ranging 0-30 VDC with nominal voltage of 24VDC while the input current requirement is 7 mA at rated voltage with field side and logic side isolation rated at 1500 Volts.
The IC693MDL645 has an ON-state voltage rating of 11.5 - 30 VDC and OFF state voltage of 0-5VDC. Similarly, the ON-state current is 3.2 mA, minimum and 1.1 mA OFF-state current. The module’s ON-response time is 7 ms for both ON and OFF states. This module is installed to an available slot of a 90-30 PLC system 5-slot or 10-slot baseplate. It draws current from the backplane with 80 mA (all inputs on) from 5 volt bus on backplane and 125 mA from the Isolated 24 volt backplane bus or from user supplied power. Internally, the received voltage signal of the module is stored to the %I status table.
The IC693MDL645 has status LED indicators installed to depict the energization state of each channel. These indicators may also be used as troubleshooting reference, confirming if the signal voltage from the external connected device has reached the specific input point of the module. This module uses a 20-slot removable terminal block and provided with circuit information, printed on the hinged dorr of the module.
The GE Fanuc IC693MDL645 module comes with an input voltage range of 0 to 30 Volts DC, while the input current is rated at 7 milliamps. The response time is rated as 7 milliseconds on and 7 milliseconds off while the trigger voltage is 11.5 to 30 Volts. The connector type is rated as the terminal block type and it uses up to 20 screws that are all included with the module. The internal power is rated as 80 milliamps of current at 5 Volts DC with 125 milliamps of current at 24 Volts DC isolated voltage.
| Revision Part # | Also known as | |
|---|---|---|
| IC693MDL645B | IC693MDL645-B, Series B, Rev B | |
| IC693MDL645C | IC693MDL645-C, Series C, Rev C | |
| IC693MDL645D | IC693MDL645-D, Series D, Rev D | |
| IC693MDL645E | IC693MDL645-E, Series E, Rev E | |
| IC693MDL645F | IC693MDL645-F, Series F, Rev F | |
| IC693MDL645G | IC693MDL645-G, Series G, Rev G | |
| IC693MDL645H | IC693MDL645-H, Series H, Rev H | |
| IC693MDL645J | IC693MDL645-J, Series J, Rev J | |
| IC693MDL645K | IC693MDL645-K, Series K, Rev K | |
| IC693MDL645LTF | IC693MDL645-LTF, Series LTF, Rev LTF | |
| IC693MDL645LTG | IC693MDL645-LTG, Series LTG, Rev LTG | |
| Don't see your particular revision? Contact us now. | ||
- 1C693MDL645
- 1C693MDL6A5
- IC693MDL6A5
Does the IC693MDL645 come with a warranty?
Yes, the IC693MDL645 includes a free 2-year DO Supply warranty. You can upgrade to a 3-year warranty at checkout for even more protection.
Does the IC693MDL645 come with status indicators?
Yes. The IC693MDL645 status indicators are situated on the module’s front panel. Each LED represent One (1) input channel.
What is the operating voltage range of the IC693MDL645?
The IC693MDL645 operating voltage range is 0-30 VDC.
What is the compatible baseplate for use with the IC693MDL645?
Compatible baseplate is a series 90-30 baseplate, 5-slot or 10-slot chassis.
The IC693MDL64 module is a programmable logic controller or PLC by GE Fanuc. The input or output programmable logic controller features 16 input controls.