IC693MDL730

The IC693MDL730 is a Positive logic output module from the Series 90-30 Programmable Logic Controller (PLC) product family of GE Fanuc, now under Emerson Automation. This module features Eight (8) discrete output channels in a single group, delivering an output voltage range of 12-24 VDC with + 20%, -15% ripple. Each channel delivers an output current of 2 Amperes per point; 2 Amperes per fuse at 60 Degree Celsius; 4 Amperes per fuse at 50 Degree Celsius. The IC693MDL730 comes with isolation between the field side and logic side amounting to 1500 Volts. Output channels have an inrush current rating of 9.4 Amperes for 10 ms; maximum output voltage drop of 12 Volts; maximum off-state leakage current of 1 mA along with a typical On and off response time of 2ms for each transition. This module occupies a single slot of the 90-30 baseplate and is compatible with any I/O slot of a Series 90-30 Five (5) or Ten (10) slot baseplate. It has a current draw of 55 mA when all outputs are energized, sourced from the 5 VDC bus residing on the backplane. The IC693MDL730 is compatible for use with a variety of electrical loads particularly motor starters, solenoids, and indicators. An external power supply must be wired to the module to provide operational power. Status LED indicators are installed to the module’s front panel which includes blown fuse indicator, module fault indicator, and Eight (8) channel indicators, individually assigned to each output channel depicting the operational state of each output point. This module comes with a removal terminal board for simplified maintenance.

The IC693MDL730 PLC module comes with a 12 to 24 Volts DC voltage rating with positive logic and 2 Amps of output current. The component features DC power and it comes with 8 points. The unit features 2 Amps of load current per point while the response time is rated as 2 milliseconds ON and 2 milliseconds OFF. The output type is transistor output and the module comes with positive polarity. The connector type is a terminal block with 20 screws that are included with the module.