IC693MDL733 - In Stock | GE Fanuc - GE IP - Emerson Series 90-30

IC693MDL733

Rated 4.9 with 18 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693MDL733

Revisions: C E 
Description: The GE Fanuc IC693MDL733 module is a digital I/O module. There are 8 digital outputs on the IC693MDL733 module.  
In Stock Ships Today
Request a quote for IC693MDL733

Description:

The GE Fanuc IC693MDL733 module is a digital I/O module. There are 8 digital outputs on the IC693MDL733 module.

 

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: C E 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693MDL733.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 18 reviews

    Technical Specifications for IC693MDL733

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693MDL733
Product typeDigital I/O
CompatibilityGE Fanuc 90-30 PLCs
Rated voltage12 / 24 Volts DC
Outputs points8
Peak current per output 0.5 Amps
Module current draw50 milliamps
Module voltage input5 Volts DC
Operating temperature0 to 60 degrees Celsius
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693MDL733 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693MDL733 units instead of migration.

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693MDL733
Product typeDigital I/O
CompatibilityGE Fanuc 90-30 PLCs
Rated voltage12 / 24 Volts DC
Outputs points8
Peak current per output 0.5 Amps
Module current draw50 milliamps
Module voltage input5 Volts DC
Operating temperature0 to 60 degrees Celsius
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693MDL733 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693MDL733 units instead of migration.

s

About IC693MDL733

The GE Fanuc IC693MDL733 module is an I/O module. The IC693MDL733 module is a 12 to 24 Volts DC negative logic and 0.5 Amps rated output module for the GE Series 90-30 programmable logic controllers. The IC693MDL733 module provides 8 output points in one group with a common output terminal. The IC693MDL733 module is designed and manufactured by the GE Fanuc company. The Series 90-30 I/O modules can be controlled with either a Series 90-30 PLC or with a personal computer. A Series 90-30 PLC system consists of either a single baseplate with an embedded CPU (Model 311, 313, or 323), a CPU baseplate with 4 expansion and/or remote baseplates (model 331, 340, or 341) or a CPU baseplate with up to 7 expansion and/or remote baseplates (model 350, 351, 352, 360, 363, and 364).



 



The types of I/O modules available from GE Fanuc include discrete input modules, discrete output modules, discrete combination modules, analog input modules, analog output modules, and analog combination modules. The IC693MDL733 module is a discrete output module and it is designed to have negative logic characteristics and it sinks current from the load(s) to the negative power bus or to the user common bus. The rated voltage for the IC693MDL733 module is 12 to 24 Volts DC. The output voltage range is 12 to 24 Volts DC. There are 8 outputs per module. There is 1500 Volts of isolation between the field side and logic side. The maximum output current per point is 0.5 Amps. The module power consumption rating is 50 milliamps. The IC693MDL733 module requires 5 Volts DC of power from the backplane.



Repair Services for IC693MDL733

Type Lead Time Price Action
Repair Service 2-4 weeks $151cartAdd to Cart

Our highly skilled technicians can repair your IC693MDL733. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693MDL733

Please refer to the manual for more information about the IC693MDL733 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693MDL733C
IC693MDL733-C, Series C, Rev C Request Quote
IC693MDL733E
IC693MDL733-E, Series E, Rev E Request Quote
Common misspellings:
  • 1C693MDL733
  • IC693MD1733
  • IC693MDL733

Dimensions For IC693MDL733

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693MDL733

Resolutions For IC693MDL733

About

Technical Specifications for IC693MDL733

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693MDL733
Product typeDigital I/O
CompatibilityGE Fanuc 90-30 PLCs
Rated voltage12 / 24 Volts DC
Outputs points8
Peak current per output 0.5 Amps
Module current draw50 milliamps
Module voltage input5 Volts DC
Operating temperature0 to 60 degrees Celsius
Product Lifecycle Status*Discontinued/Obsolete
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693MDL733
Product typeDigital I/O
CompatibilityGE Fanuc 90-30 PLCs
Rated voltage12 / 24 Volts DC
Outputs points8
Peak current per output 0.5 Amps
Module current draw50 milliamps
Module voltage input5 Volts DC
Operating temperature0 to 60 degrees Celsius
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693MDL733 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693MDL733 units instead of migration.

About IC693MDL733

The GE Fanuc IC693MDL733 module is an I/O module. The IC693MDL733 module is a 12 to 24 Volts DC negative logic and 0.5 Amps rated output module for the GE Series 90-30 programmable logic controllers. The IC693MDL733 module provides 8 output points in one group with a common output terminal. The IC693MDL733 module is designed and manufactured by the GE Fanuc company. The Series 90-30 I/O modules can be controlled with either a Series 90-30 PLC or with a personal computer. A Series 90-30 PLC system consists of either a single baseplate with an embedded CPU (Model 311, 313, or 323), a CPU baseplate with 4 expansion and/or remote baseplates (model 331, 340, or 341) or a CPU baseplate with up to 7 expansion and/or remote baseplates (model 350, 351, 352, 360, 363, and 364).



 



The types of I/O modules available from GE Fanuc include discrete input modules, discrete output modules, discrete combination modules, analog input modules, analog output modules, and analog combination modules. The IC693MDL733 module is a discrete output module and it is designed to have negative logic characteristics and it sinks current from the load(s) to the negative power bus or to the user common bus. The rated voltage for the IC693MDL733 module is 12 to 24 Volts DC. The output voltage range is 12 to 24 Volts DC. There are 8 outputs per module. There is 1500 Volts of isolation between the field side and logic side. The maximum output current per point is 0.5 Amps. The module power consumption rating is 50 milliamps. The IC693MDL733 module requires 5 Volts DC of power from the backplane.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $151cartAdd to Cart

Our highly skilled technicians can repair your IC693MDL733. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $151cartAdd to Cart

Our highly skilled technicians can repair your IC693MDL733. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693MDL733 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693MDL733C
IC693MDL733/C, Series C, Rev C Request Quote
IC693MDL733E
IC693MDL733/E, Series E, Rev E Request Quote

Common misspellings:
  • IC693MD1733
  • IC693MDL733
PDF