IC693MDL741 - In Stock | GE Fanuc - GE IP - Emerson Series 90-30

IC693MDL741

Rated 4.5 with 20 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693MDL741

Revisions: C D E F G 
Description: The IC693MDL741 is a Series 90-30, 12/24 VDC Negative logic output module. This module is formerly produced by GE Fanuc, now acquired by Emerson Automation. It features Sixteen (16) discrete output channels in Two (2) groups of Eight (8) channels. Each channel delivers an output voltage range of 12-24 VDC with an output current of 0.5 Amperes per point and 2 Amperes per common. It has a 110 mA current draw when all outputs are energized.
In Stock Ships Today
Request a quote for IC693MDL741

Description: The IC693MDL741 is a Series 90-30, 12/24 VDC Negative logic output module. This module is formerly produced by GE Fanuc, now acquired by Emerson Automation. It features Sixteen (16) discrete output channels in Two (2) groups of Eight (8) channels. Each channel delivers an output voltage range of 12-24 VDC with an output current of 0.5 Amperes per point and 2 Amperes per common. It has a 110 mA current draw when all outputs are energized.

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: C D E F G 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693MDL741.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 20 reviews

    Technical Specifications for IC693MDL741

BrandGE Fanuc
SeriesSeries 90-30
Manufacturer GE Fanuc; Emerson Automation (Current)
Part NumberIC693MDL741
Series Series 90-30
Product typeDigital I/O
Part Number IC693MDL741
CompatibilityGE Fanuc 90-30 PLCs
Product Description Discrete output module
Output points16
No of Channels Sixteen (16)
Peak module current draw110 milliamps
No. of output groupsTwo (2)
Module voltage input5 Volts DC
Channels per groupEight (8)
Rated voltage12/ 24 Volts DC
Isolation:1500 volts between field side and logic side; 500 Volts between groups
Peak output voltage drop0.5 Volts
Output voltage range12-24 VDC with (+ 20%, -15%)
Operating temperature0 to 60 degrees Celsius
Nominal output voltage12 / 24 VDC
Product Lifecycle Status*Discontinued/Obsolete
Output current 0.5 Amperes per point; 2 Amperes per common
Current draw 110 mA (all outputs active)
On response time, maximum2 ms
Off response time, maximum2 ms
Output Voltage Drop 0.5 volts, maximum
Off-state Leakage 1 mA maximum

*The GE Fanuc IC693MDL741 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693MDL741 units instead of migration.

BrandGE Fanuc
SeriesSeries 90-30
Manufacturer GE Fanuc; Emerson Automation (Current)
Part NumberIC693MDL741
Series Series 90-30
Product typeDigital I/O
Part Number IC693MDL741
CompatibilityGE Fanuc 90-30 PLCs
Product Description Discrete output module
Output points16
No of Channels Sixteen (16)
Peak module current draw110 milliamps
No. of output groupsTwo (2)
Module voltage input5 Volts DC
Channels per groupEight (8)
Rated voltage12/ 24 Volts DC
Isolation:1500 volts between field side and logic side; 500 Volts between groups
Peak output voltage drop0.5 Volts
Output voltage range12-24 VDC with (+ 20%, -15%)
Operating temperature0 to 60 degrees Celsius
Nominal output voltage12 / 24 VDC
Product Lifecycle Status*Discontinued/Obsolete
Output current 0.5 Amperes per point; 2 Amperes per common
Current draw 110 mA (all outputs active)
On response time, maximum2 ms
Off response time, maximum2 ms
Output Voltage Drop 0.5 volts, maximum
Off-state Leakage 1 mA maximum

*The GE Fanuc IC693MDL741 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693MDL741 units instead of migration.

s

About IC693MDL741

The IC693MDL741 is part of Emerson Automation’s Series 90-30 Programmable Logic Controller (PLC) platform, formerly from GE Fanuc. This module is a discrete output module, supporting negative logic wiring configuration. This module is provided with Sixteen (16) output LED indicators that depict the operational state of each channel of the module. The IC693MDL741 delivers an output voltage range of 12 to 24 volts DC, +20%, and –15%). It has an output current rating of 0.5 Amperes per point and 2.0 Amperes per common while output groupings are Eight (8) channels per group. This module does not come with individual channel isolation however, group isolation is provided. Group to group isolation is rated 500 Volts and 1500 Volts between field side and logic side or optical isolation. This module is also provided with a module insert where users can provide short, written descriptions of assigned outputs. The IC693MDL741 is installed to a Series 90-30 baseplate, occupying a single slot. It can act as a local output component, installed along with the CPU baseplate, or as a distributed I/O module component. The output characteristics of this module include voltage drop of 0.5 Volts, off-state leakage of 1 mA, Signal On and Off response time of 2 ms, maximum. The current draw of the IC693MDL741 is 110 mA when all outputs are energized, sourced from the 5VDC backplane. The IC693MDL741 is capable of energizing electrical loads such as motor starters, solenoids, indicating lamps, and annunciators. It may also be used with AC loads provided an interposing relay is installed in between.

The 16-point IC693MDL741 module is an I/O module for the GE Fanuc Series 90-30 PLCs. The module can be installed in any slot of a GE Series 90-30 PLC which has either a 5-slot or 10-slot baseplate. The baseplate forms the foundation of the PLC with all the other components mounted on it. When all the points on the IC693MDL741 module are on, the module current draw from the baseplate is 110 milliamps. The voltage input to the module is 5 Volts DC. The IC693MDL741 module does not contain any fuses.

The IC693MDL741 module is a 12 to 24 Volts negative logic output module. The module provides 16 output points in 2 groups with each group having a common output power terminal. LEDs which indicate on the off status of the output points are available on the module. The IC693MDL741 module sinks the current from the loads to the negative power bus or to the user common and therefore it has negative logic characteristics. Solenoids and indicators are some of the devices which can be used with the IC693MDL741 module. The range of output voltages is 12 to 24 Volts DC. Up to 1500 Volts of isolation is available between the field and logic sides and 500 Volts of isolation is available between the groups. The peak output voltage drop is 0.5 Volts. The peak off state leakage is 1 milliamp. The working and storage temperature ranges for the module are 0 to 60 degrees Celsius and -40 to 85 degrees Celsius, respectively.

FAQ for IC693MDL741

1. What is the backplane current consumption of the IC693MDL741?


The IC693MDL741 has backplane current consumption 110 mA.

2. What are the output groupings of the IC693MDL741?


The IC693MDL741 has Two (2) groups of Eight (8) outputs each.

3. What is the output current of the IC693MDL741?


The IC693MDL741 has output current of 0.5 mA per point and 2 Amperes per common.

Technical Description of IC693MDL741

The GE Fanuc IC693MDL741 module is a 16 point I/O module. The IC693MDL741 module is compatible with the GE Series 90-30 PLCs.

Repair Services for IC693MDL741

Type Lead Time Price Action
Repair Service 2-4 weeks $92cartAdd to Cart

Our highly skilled technicians can repair your IC693MDL741. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693MDL741

Please refer to the manual for more information about the IC693MDL741 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693MDL741C
IC693MDL741-C, Series C, Rev C Request Quote
IC693MDL741D
IC693MDL741-D, Series D, Rev D Request Quote
IC693MDL741E
IC693MDL741-E, Series E, Rev E Request Quote
IC693MDL741F
IC693MDL741-F, Series F, Rev F Request Quote
IC693MDL741G
IC693MDL741-G, Series G, Rev G Request Quote
Common misspellings:
  • 1C693MDL741
  • IC693MD1741
  • IC693MDL7A1
  • IC693MDL74l
  • IC693MDL741

Reviews for IC693MDL741

Product Review

"The IC693MDL741 is a Series 90-30 output module. This module is rated 12/24 VDC and comes with 16 output channels only. In terms of output density, it has a lower density compared to a 32-point module. This module is practical for use in applications with adequate panel space and a tight budget as 16 point modules costs lower compared to 32 point modules. " -DO Supply Tech

Dimensions For IC693MDL741

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693MDL741

Resolutions For IC693MDL741

About

Technical Specifications for IC693MDL741

BrandGE Fanuc
SeriesSeries 90-30
Manufacturer GE Fanuc; Emerson Automation (Current)
Part NumberIC693MDL741
Series Series 90-30
Product typeDigital I/O
Part Number IC693MDL741
CompatibilityGE Fanuc 90-30 PLCs
Product Description Discrete output module
Output points16
No of Channels Sixteen (16)
Peak module current draw110 milliamps
No. of output groupsTwo (2)
Module voltage input5 Volts DC
Channels per groupEight (8)
Rated voltage12/ 24 Volts DC
Isolation:1500 volts between field side and logic side; 500 Volts between groups
Peak output voltage drop0.5 Volts
Output voltage range12-24 VDC with (+ 20%, -15%)
Operating temperature0 to 60 degrees Celsius
Nominal output voltage12 / 24 VDC
Product Lifecycle Status*Discontinued/Obsolete
Output current 0.5 Amperes per point; 2 Amperes per common
Current draw 110 mA (all outputs active)
On response time, maximum2 ms
Off response time, maximum2 ms
Output Voltage Drop 0.5 volts, maximum
Off-state Leakage 1 mA maximum
BrandGE Fanuc
SeriesSeries 90-30
Manufacturer GE Fanuc; Emerson Automation (Current)
Part NumberIC693MDL741
Series Series 90-30
Product typeDigital I/O
Part Number IC693MDL741
CompatibilityGE Fanuc 90-30 PLCs
Product Description Discrete output module
Output points16
No of Channels Sixteen (16)
Peak module current draw110 milliamps
No. of output groupsTwo (2)
Module voltage input5 Volts DC
Channels per groupEight (8)
Rated voltage12/ 24 Volts DC
Isolation:1500 volts between field side and logic side; 500 Volts between groups
Peak output voltage drop0.5 Volts
Output voltage range12-24 VDC with (+ 20%, -15%)
Operating temperature0 to 60 degrees Celsius
Nominal output voltage12 / 24 VDC
Product Lifecycle Status*Discontinued/Obsolete
Output current 0.5 Amperes per point; 2 Amperes per common
Current draw 110 mA (all outputs active)
On response time, maximum2 ms
Off response time, maximum2 ms
Output Voltage Drop 0.5 volts, maximum
Off-state Leakage 1 mA maximum

*The GE Fanuc IC693MDL741 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693MDL741 units instead of migration.

About IC693MDL741

The IC693MDL741 is part of Emerson Automation’s Series 90-30 Programmable Logic Controller (PLC) platform, formerly from GE Fanuc. This module is a discrete output module, supporting negative logic wiring configuration. This module is provided with Sixteen (16) output LED indicators that depict the operational state of each channel of the module. The IC693MDL741 delivers an output voltage range of 12 to 24 volts DC, +20%, and –15%). It has an output current rating of 0.5 Amperes per point and 2.0 Amperes per common while output groupings are Eight (8) channels per group. This module does not come with individual channel isolation however, group isolation is provided. Group to group isolation is rated 500 Volts and 1500 Volts between field side and logic side or optical isolation. This module is also provided with a module insert where users can provide short, written descriptions of assigned outputs. The IC693MDL741 is installed to a Series 90-30 baseplate, occupying a single slot. It can act as a local output component, installed along with the CPU baseplate, or as a distributed I/O module component. The output characteristics of this module include voltage drop of 0.5 Volts, off-state leakage of 1 mA, Signal On and Off response time of 2 ms, maximum. The current draw of the IC693MDL741 is 110 mA when all outputs are energized, sourced from the 5VDC backplane. The IC693MDL741 is capable of energizing electrical loads such as motor starters, solenoids, indicating lamps, and annunciators. It may also be used with AC loads provided an interposing relay is installed in between.

The 16-point IC693MDL741 module is an I/O module for the GE Fanuc Series 90-30 PLCs. The module can be installed in any slot of a GE Series 90-30 PLC which has either a 5-slot or 10-slot baseplate. The baseplate forms the foundation of the PLC with all the other components mounted on it. When all the points on the IC693MDL741 module are on, the module current draw from the baseplate is 110 milliamps. The voltage input to the module is 5 Volts DC. The IC693MDL741 module does not contain any fuses.

The IC693MDL741 module is a 12 to 24 Volts negative logic output module. The module provides 16 output points in 2 groups with each group having a common output power terminal. LEDs which indicate on the off status of the output points are available on the module. The IC693MDL741 module sinks the current from the loads to the negative power bus or to the user common and therefore it has negative logic characteristics. Solenoids and indicators are some of the devices which can be used with the IC693MDL741 module. The range of output voltages is 12 to 24 Volts DC. Up to 1500 Volts of isolation is available between the field and logic sides and 500 Volts of isolation is available between the groups. The peak output voltage drop is 0.5 Volts. The peak off state leakage is 1 milliamp. The working and storage temperature ranges for the module are 0 to 60 degrees Celsius and -40 to 85 degrees Celsius, respectively.

FAQ for IC693MDL741

1. What is the backplane current consumption of the IC693MDL741?


The IC693MDL741 has backplane current consumption 110 mA.

2. What are the output groupings of the IC693MDL741?


The IC693MDL741 has Two (2) groups of Eight (8) outputs each.

3. What is the output current of the IC693MDL741?


The IC693MDL741 has output current of 0.5 mA per point and 2 Amperes per common.

Technical Description of IC693MDL741

The GE Fanuc IC693MDL741 module is a 16 point I/O module. The IC693MDL741 module is compatible with the GE Series 90-30 PLCs.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $92cartAdd to Cart

Our highly skilled technicians can repair your IC693MDL741. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $92cartAdd to Cart

Our highly skilled technicians can repair your IC693MDL741. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693MDL741 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693MDL741C
IC693MDL741/C, Series C, Rev C Request Quote
IC693MDL741D
IC693MDL741/D, Series D, Rev D Request Quote
IC693MDL741E
IC693MDL741/E, Series E, Rev E Request Quote
IC693MDL741F
IC693MDL741/F, Series F, Rev F Request Quote
IC693MDL741G
IC693MDL741/G, Series G, Rev G Request Quote

Common misspellings:
  • IC693MD1741
  • IC693MDL7A1
  • IC693MDL74l
  • IC693MDL741
PDF
Reviews

Reviews for IC693MDL741

Product Review

"The IC693MDL741 is a Series 90-30 output module. This module is rated 12/24 VDC and comes with 16 output channels only. In terms of output density, it has a lower density compared to a 32-point module. This module is practical for use in applications with adequate panel space and a tight budget as 16 point modules costs lower compared to 32 point modules. " -DO Supply Tech