IC693PRG301 | GE Fanuc - GE IP - Emerson Series 90-30

IC693PRG301

Rated 4.7 with 6 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693PRG301

Description: The IC693PRG301 module is a handheld programmer or HHP device made by GE Fanuc. This device is used to configure PLC devices and I/O parameters. It is a Series 90-30 device that can also connect with a personal computer or CPU by using the 15-Pin D-type connector. The HHP has designed to meet the demands of industrial automation applications. read more...
Available Now
Request a quote for IC693PRG301

Description: The IC693PRG301 module is a handheld programmer or HHP device made by GE Fanuc. This device is used to configure PLC devices and I/O parameters. It is a Series 90-30 device that can also connect with a personal computer or CPU by using the 15-Pin D-type connector. The HHP has designed to meet the demands of industrial automation applications. read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693PRG301.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 6 reviews

    Technical Specifications for IC693PRG301

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693PRG301
DescriptionHandheld programmer
Connector15 Pin D-type
KeypadYes
DisplayYes
Memory CardYes
Statement List ProgramSupported
Cable SupportedLatching Connector Cable
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693PRG301 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693PRG301 units instead of migration.

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693PRG301
DescriptionHandheld programmer
Connector15 Pin D-type
KeypadYes
DisplayYes
Memory CardYes
Statement List ProgramSupported
Cable SupportedLatching Connector Cable
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693PRG301 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693PRG301 units instead of migration.

s

About IC693PRG301

The IC693PRG301 module is a handheld programmer or HHP device made by GE Fanuc. This device is used to configure PLC devices and I/O parameters. It is a Series 90-30 device that can also connect with a personal computer or CPU by using the 15-Pin D-type connector. The HHP has designed to meet the demands of industrial automation applications. The device supports the statement list program. By using the statement list program, the device is able to edit, insert, and delete the program changes. The IC693PRG301 module can be used to monitor reference data or I/O point status while reviewing the logic program. The HHP comes with a keypad that can be used to configure and change the operating mode of different PLC devices. An LCD screen is also present along with a keypad that can display 2 lines and 16 characters information at a time. The contents of the screen will depend on the current operating mode and the function.



 



The GE Fanuc Series 90-30 IC693PRG301 handheld programmer module can directly communicate with a PLC by using an RS-422 compatible port. The HHP is also equipped with a memory card interface that can be used to expand the memory of the device. The memory card can be used for the storage and retrieval of the program logic and configuration data. The setup and installation process of the programmer device is easy. The IC693PRG301 handheld programmer module can be connected to a PLC by device using a cable with a latching connector. The cable is also used to supply power to the device. When the cable is connected, it provides an indication to the PLC that an HHP device is connected to it.



Technical Description of IC693PRG301

The IC693PRG301 module is a GE Fanuc handheld module. It is a Series 90-30 device.

Repair Services for IC693PRG301

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693PRG301. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693PRG301

Please refer to the manual for more information about the IC693PRG301 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
Common misspellings:
  • 1C693PRG301
  • IC693PRG3o1
  • IC693PRG30l
  • IC693PRG301

Dimensions For IC693PRG301

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693PRG301

Resolutions For IC693PRG301

About

Technical Specifications for IC693PRG301

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693PRG301
DescriptionHandheld programmer
Connector15 Pin D-type
KeypadYes
DisplayYes
Memory CardYes
Statement List ProgramSupported
Cable SupportedLatching Connector Cable
Product Lifecycle Status*Discontinued/Obsolete
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693PRG301
DescriptionHandheld programmer
Connector15 Pin D-type
KeypadYes
DisplayYes
Memory CardYes
Statement List ProgramSupported
Cable SupportedLatching Connector Cable
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693PRG301 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693PRG301 units instead of migration.

About IC693PRG301

The IC693PRG301 module is a handheld programmer or HHP device made by GE Fanuc. This device is used to configure PLC devices and I/O parameters. It is a Series 90-30 device that can also connect with a personal computer or CPU by using the 15-Pin D-type connector. The HHP has designed to meet the demands of industrial automation applications. The device supports the statement list program. By using the statement list program, the device is able to edit, insert, and delete the program changes. The IC693PRG301 module can be used to monitor reference data or I/O point status while reviewing the logic program. The HHP comes with a keypad that can be used to configure and change the operating mode of different PLC devices. An LCD screen is also present along with a keypad that can display 2 lines and 16 characters information at a time. The contents of the screen will depend on the current operating mode and the function.



 



The GE Fanuc Series 90-30 IC693PRG301 handheld programmer module can directly communicate with a PLC by using an RS-422 compatible port. The HHP is also equipped with a memory card interface that can be used to expand the memory of the device. The memory card can be used for the storage and retrieval of the program logic and configuration data. The setup and installation process of the programmer device is easy. The IC693PRG301 handheld programmer module can be connected to a PLC by device using a cable with a latching connector. The cable is also used to supply power to the device. When the cable is connected, it provides an indication to the PLC that an HHP device is connected to it.



Technical Description of IC693PRG301

The IC693PRG301 module is a GE Fanuc handheld module. It is a Series 90-30 device.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693PRG301. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693PRG301. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF