IC693PWR325 - In Stock | GE Fanuc - GE IP - Emerson Series 90-30

IC693PWR325

Rated 4.5 with 11 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693PWR325

Revisions: E G J 
Description: The GE Fanuc IC693PWR325 module is an input power supply device. It has a rated load capacity of 30 Watts. It is part of Series 90-30 of the GE Fanuc PLCs and accessories and it is powered with a voltage rating of 24 to 48 Volts DC. The power supply unit can deliver an output voltage of 5 Volts DC and a 24 Volts DC relay output voltage that provides power to the circuit. read more...
In Stock Ships Today
Request a quote for IC693PWR325

Description: The GE Fanuc IC693PWR325 module is an input power supply device. It has a rated load capacity of 30 Watts. It is part of Series 90-30 of the GE Fanuc PLCs and accessories and it is powered with a voltage rating of 24 to 48 Volts DC. The power supply unit can deliver an output voltage of 5 Volts DC and a 24 Volts DC relay output voltage that provides power to the circuit. read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: E G J 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693PWR325.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.5 with 11 reviews

    Technical Specifications for IC693PWR325

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693PWR325
DescriptionPower supply device
Voltage24/48 Volts DC
Output current0.8 Amperes
Peak inrush current4 Amperes
Battery1.45 Amp-hours
Torque12 pounds on an inch
StandardCE, UL
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693PWR325 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693PWR325 units instead of migration.

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693PWR325
DescriptionPower supply device
Voltage24/48 Volts DC
Output current0.8 Amperes
Peak inrush current4 Amperes
Battery1.45 Amp-hours
Torque12 pounds on an inch
StandardCE, UL
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693PWR325 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693PWR325 units instead of migration.

s

About IC693PWR325

The GE Fanuc IC693PWR325 module is an input power supply device. It has a rated load capacity of 30 Watts. It is part of Series 90-30 of the GE Fanuc PLCs and accessories and it is powered with a voltage rating of 24 to 48 Volts DC. The power supply unit can deliver an output voltage of 5 Volts DC and a 24 Volts DC relay output voltage that provides power to the circuit. It is also equipped with a 24 Volts DC isolated output that powers the input modules. The GE Fanuc IC693PWR325 power supply module comes with a peak inrush current of 4 Amps at 100 milliseconds maximum. It also comes with an overvoltage rating of 5 Volts DC output. The power supply unit is easy to configure and install.



 



A battery module in the IC693PWR325 power supply unit provides extended memory backup time compared to a normal battery. The module can support a 1.45 Amp-hours rated battery that compact in size. The operating temperature range for the battery should be in between 0 and 85 degrees Celsius. The power unit can be mounted easily on the factory floor or any surface by using a bolt screw. The power unit has been certified with the UL and CE standards. The IC693PWR325 module should be used for indoor applications only. It can be connected to a personal computer by using a serial port. It has a rated torque of 12 pounds on an inch. It has a current output rating of 0.8 Amps. The conductors used in the power supply have a 75 degrees Celsius maximum operating temperature. The IC693PWR325 should be kept away from heat-generating devices and electrostatic discharge.



Technical Description of IC693PWR325

The IC693PWR325 module is an input power supply made by GE Fanuc. It comes with a load capacity of 30 Watts.

Repair Services for IC693PWR325

Type Lead Time Price Action
Repair Service 2-4 weeks $316cartAdd to Cart

Our highly skilled technicians can repair your IC693PWR325. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693PWR325

Please refer to the manual for more information about the IC693PWR325 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693PWR325E
IC693PWR325-E, Series E, Rev E Request Quote
IC693PWR325G
IC693PWR325-G, Series G, Rev G Request Quote
IC693PWR325J
IC693PWR325-J, Series J, Rev J Request Quote
Common misspellings:
  • 1C693PWR325
  • IC693PWR325

Dimensions For IC693PWR325

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693PWR325

Resolutions For IC693PWR325

About

Technical Specifications for IC693PWR325

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693PWR325
DescriptionPower supply device
Voltage24/48 Volts DC
Output current0.8 Amperes
Peak inrush current4 Amperes
Battery1.45 Amp-hours
Torque12 pounds on an inch
StandardCE, UL
Product Lifecycle Status*Discontinued/Obsolete
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693PWR325
DescriptionPower supply device
Voltage24/48 Volts DC
Output current0.8 Amperes
Peak inrush current4 Amperes
Battery1.45 Amp-hours
Torque12 pounds on an inch
StandardCE, UL
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693PWR325 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693PWR325 units instead of migration.

About IC693PWR325

The GE Fanuc IC693PWR325 module is an input power supply device. It has a rated load capacity of 30 Watts. It is part of Series 90-30 of the GE Fanuc PLCs and accessories and it is powered with a voltage rating of 24 to 48 Volts DC. The power supply unit can deliver an output voltage of 5 Volts DC and a 24 Volts DC relay output voltage that provides power to the circuit. It is also equipped with a 24 Volts DC isolated output that powers the input modules. The GE Fanuc IC693PWR325 power supply module comes with a peak inrush current of 4 Amps at 100 milliseconds maximum. It also comes with an overvoltage rating of 5 Volts DC output. The power supply unit is easy to configure and install.



 



A battery module in the IC693PWR325 power supply unit provides extended memory backup time compared to a normal battery. The module can support a 1.45 Amp-hours rated battery that compact in size. The operating temperature range for the battery should be in between 0 and 85 degrees Celsius. The power unit can be mounted easily on the factory floor or any surface by using a bolt screw. The power unit has been certified with the UL and CE standards. The IC693PWR325 module should be used for indoor applications only. It can be connected to a personal computer by using a serial port. It has a rated torque of 12 pounds on an inch. It has a current output rating of 0.8 Amps. The conductors used in the power supply have a 75 degrees Celsius maximum operating temperature. The IC693PWR325 should be kept away from heat-generating devices and electrostatic discharge.



Technical Description of IC693PWR325

The IC693PWR325 module is an input power supply made by GE Fanuc. It comes with a load capacity of 30 Watts.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $316cartAdd to Cart

Our highly skilled technicians can repair your IC693PWR325. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $316cartAdd to Cart

Our highly skilled technicians can repair your IC693PWR325. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693PWR325 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693PWR325E
IC693PWR325/E, Series E, Rev E Request Quote
IC693PWR325G
IC693PWR325/G, Series G, Rev G Request Quote
IC693PWR325J
IC693PWR325/J, Series J, Rev J Request Quote

Common misspellings:
  • IC693PWR325
PDF