IC693PWR328 | GE Fanuc - GE IP - Emerson Series 90-30

IC693PWR328

Rated 4.6 with 16 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC693PWR328

Revisions: C 
Description: The GE Fanuc IC693PWR328 module is a 30-Watt power supply module. It has been designed for 48 Volts DC input voltage.
Available Now
Request a quote for IC693PWR328

Description:

The GE Fanuc IC693PWR328 module is a 30-Watt power supply module. It has been designed for 48 Volts DC input voltage.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: C 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC693PWR328.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.6 with 16 reviews

    Technical Specifications for IC693PWR328

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693PWR328
DescriptionPower supply device
Input voltage48 Volts DC
Output voltage24 Volts DC
CommunicationRS 485
Compatible devicesSeries 90-30 PLCs
Isolated voltage24 Volts DC with 20 Watts of output
Relay voltage24 Volts DC with 15 Watts
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693PWR328 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693PWR328 units instead of migration.

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693PWR328
DescriptionPower supply device
Input voltage48 Volts DC
Output voltage24 Volts DC
CommunicationRS 485
Compatible devicesSeries 90-30 PLCs
Isolated voltage24 Volts DC with 20 Watts of output
Relay voltage24 Volts DC with 15 Watts
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693PWR328 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693PWR328 units instead of migration.

s

About IC693PWR328

The IC693PWR328 module is a standard power supply module made by GE Fanuc. It is a Series 90-30 GE device that works with Series 90-30 PLCs. It operates with an input voltage of 48 Volts DC and an output voltage of 24 Volts DC. The Series 90-30 PLCs and accessories like the power supply are some of the most stable PLCs available. The power supply can be used to meet different PLC application demands. The variety and flexibility of this series make industrial automation easy. The module offers high-level communication options with its RS-485 serial port. It can also be connected to a personal computer by using the serial port. The IC693PWR328 module plugs into the leftmost slot of the Series 90-30 baseplate. It has 3 different output capacities of 5 Volts DC with 15 Watts of output, 24 Volts DC isolated voltage with 20 Watts of output, and  24 Volts DC relay voltage with 15 Watts of output.



 



The GE Fanuc Series 90-30 IC693PWR328 power module comes with 4 system status indicators on the top side of the front faceplate. These indicators show the operating state of the power supply, the status of the PLC, whether the RUN mode of the unit is being used or not, and the battery condition of the unit. A battery compartment is present on the bottom side of the unit. Its purpose is to house the lithium back-up battery. This battery is connected to the module by using the battery connectors present inside the compartment cover. The side panel of the IC693PWR328 module has internal power sources and connections for AC/DC power sources. The IC693PWR328 module has 3 output voltages that are connected internally to the backplane on the baseplate. The voltage and power that are required by these modules are supplied through the baseplate connectors.



Repair Services for IC693PWR328

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693PWR328. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC693PWR328

Please refer to the manual for more information about the IC693PWR328 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693PWR328C
IC693PWR328-C, Series C, Rev C Request Quote
Common misspellings:
  • 1C693PWR328
  • IC693PWR32b
  • IC693PWR328

Dimensions For IC693PWR328

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC693PWR328

Resolutions For IC693PWR328

About

Technical Specifications for IC693PWR328

BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693PWR328
DescriptionPower supply device
Input voltage48 Volts DC
Output voltage24 Volts DC
CommunicationRS 485
Compatible devicesSeries 90-30 PLCs
Isolated voltage24 Volts DC with 20 Watts of output
Relay voltage24 Volts DC with 15 Watts
Product Lifecycle Status*Discontinued/Obsolete
BrandGE Fanuc
SeriesSeries 90-30
Part NumberIC693PWR328
DescriptionPower supply device
Input voltage48 Volts DC
Output voltage24 Volts DC
CommunicationRS 485
Compatible devicesSeries 90-30 PLCs
Isolated voltage24 Volts DC with 20 Watts of output
Relay voltage24 Volts DC with 15 Watts
Product Lifecycle Status*Discontinued/Obsolete

*The GE Fanuc IC693PWR328 has been discontinued by the manufacturer, however we specialize in obsolete parts and can likely still supply surplus and/or refurbished replacement IC693PWR328 units instead of migration.

About IC693PWR328

The IC693PWR328 module is a standard power supply module made by GE Fanuc. It is a Series 90-30 GE device that works with Series 90-30 PLCs. It operates with an input voltage of 48 Volts DC and an output voltage of 24 Volts DC. The Series 90-30 PLCs and accessories like the power supply are some of the most stable PLCs available. The power supply can be used to meet different PLC application demands. The variety and flexibility of this series make industrial automation easy. The module offers high-level communication options with its RS-485 serial port. It can also be connected to a personal computer by using the serial port. The IC693PWR328 module plugs into the leftmost slot of the Series 90-30 baseplate. It has 3 different output capacities of 5 Volts DC with 15 Watts of output, 24 Volts DC isolated voltage with 20 Watts of output, and  24 Volts DC relay voltage with 15 Watts of output.



 



The GE Fanuc Series 90-30 IC693PWR328 power module comes with 4 system status indicators on the top side of the front faceplate. These indicators show the operating state of the power supply, the status of the PLC, whether the RUN mode of the unit is being used or not, and the battery condition of the unit. A battery compartment is present on the bottom side of the unit. Its purpose is to house the lithium back-up battery. This battery is connected to the module by using the battery connectors present inside the compartment cover. The side panel of the IC693PWR328 module has internal power sources and connections for AC/DC power sources. The IC693PWR328 module has 3 output voltages that are connected internally to the backplane on the baseplate. The voltage and power that are required by these modules are supplied through the baseplate connectors.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693PWR328. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC693PWR328. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC693PWR328 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC693PWR328C
IC693PWR328/C, Series C, Rev C Request Quote

Common misspellings:
  • IC693PWR32b
  • IC693PWR328
PDF