DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The GE Fanuc Automation IC687RCM711 redundancy communications module is applied to a hot standby CPU redundancy system. It requires a current of 1.2 Amps and it comes with 5 LED indicators and a pushbutton.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the IC687RCM711. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | GE Fanuc |
Series | Series 90-70 |
Part Number | IC687RCM711 |
Type | Redundancy communications module |
Current required | 1.2 Amps (From 5V Bus) |
Maximum cable length | 15 m |
Effective data rate | 500 KB/sec |
Electrical isolation | Non-isolated differential communication |
VME | Designed to support VME standard C.1 |
LED indicators | Yes, 5 |
Pushbutton | Yes |
Connectors | Two, top and bottom |
Systems | Hot Standby and Enhanced Hot Standby CPU Redundancy system |
Brand | GE Fanuc |
Series | Series 90-70 |
Part Number | IC687RCM711 |
Type | Redundancy communications module |
Current required | 1.2 Amps (From 5V Bus) |
Maximum cable length | 15 m |
Effective data rate | 500 KB/sec |
Electrical isolation | Non-isolated differential communication |
VME | Designed to support VME standard C.1 |
LED indicators | Yes, 5 |
Pushbutton | Yes |
Connectors | Two, top and bottom |
Systems | Hot Standby and Enhanced Hot Standby CPU Redundancy system |
The IC687RCM711 communications module is designed and distributed by GE Fanuc Automation. This part is used in a system known as a “Hot Redundancy System”. The purpose of the part is to synchronize the CPUs that are installed in this system. It uses existent data in the back-up unit to perform this specific operation. The module can also be used to transfer data from one CPU to another when connected to this system. The GE Fanuc Automation IC687RCM711 communications module can be wired with at least 7.5 meters of cable. It is compatible with the GE IC697 series CPUs from the same series. When it comes to installation space, this module only requires a single slot and it includes 2 different connectors. The most common slot is the one that is placed on the top cover of the module.
The GE Fanuc Automation IC687RCM711 communications module performs data transfers with a speed of up to 500 KB per second. Unlike other similar devices, this communications module does not require any kind of isolation. This module also includes 5 LED indicators that are green to show the current status of the application process and the CPUs. For a human-machine interface, the GE Fanuc Automation IC687RCM711 communications module has a physical pushbutton. The function of this button is to change the control from the unit to the back-up unit when required. It is necessary that both units be ready to use, and once they have been switched, it is necessary to wait 10 seconds to switch them back again. This module has a current rating of 1.2 Amps.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your IC687RCM711. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the IC687RCM711 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | GE Fanuc |
Series | Series 90-70 |
Part Number | IC687RCM711 |
Type | Redundancy communications module |
Current required | 1.2 Amps (From 5V Bus) |
Maximum cable length | 15 m |
Effective data rate | 500 KB/sec |
Electrical isolation | Non-isolated differential communication |
VME | Designed to support VME standard C.1 |
LED indicators | Yes, 5 |
Pushbutton | Yes |
Connectors | Two, top and bottom |
Systems | Hot Standby and Enhanced Hot Standby CPU Redundancy system |
Brand | GE Fanuc |
Series | Series 90-70 |
Part Number | IC687RCM711 |
Type | Redundancy communications module |
Current required | 1.2 Amps (From 5V Bus) |
Maximum cable length | 15 m |
Effective data rate | 500 KB/sec |
Electrical isolation | Non-isolated differential communication |
VME | Designed to support VME standard C.1 |
LED indicators | Yes, 5 |
Pushbutton | Yes |
Connectors | Two, top and bottom |
Systems | Hot Standby and Enhanced Hot Standby CPU Redundancy system |
The IC687RCM711 communications module is designed and distributed by GE Fanuc Automation. This part is used in a system known as a “Hot Redundancy System”. The purpose of the part is to synchronize the CPUs that are installed in this system. It uses existent data in the back-up unit to perform this specific operation. The module can also be used to transfer data from one CPU to another when connected to this system. The GE Fanuc Automation IC687RCM711 communications module can be wired with at least 7.5 meters of cable. It is compatible with the GE IC697 series CPUs from the same series. When it comes to installation space, this module only requires a single slot and it includes 2 different connectors. The most common slot is the one that is placed on the top cover of the module.
The GE Fanuc Automation IC687RCM711 communications module performs data transfers with a speed of up to 500 KB per second. Unlike other similar devices, this communications module does not require any kind of isolation. This module also includes 5 LED indicators that are green to show the current status of the application process and the CPUs. For a human-machine interface, the GE Fanuc Automation IC687RCM711 communications module has a physical pushbutton. The function of this button is to change the control from the unit to the back-up unit when required. It is necessary that both units be ready to use, and once they have been switched, it is necessary to wait 10 seconds to switch them back again. This module has a current rating of 1.2 Amps.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your IC687RCM711. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your IC687RCM711. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.