IC697ACC624 - In Stock | GE Fanuc - GE IP - Emerson Series 90-70

IC697ACC624

IC697ACC624

Revisions: A 
Description:

The GE Fanuc Automation IC697ACC624 fan assembly is used with the 5-slot GE Series 90-70 racks and the 9-slots RX7i racks to protect the racks and their connections from excessive heat. Its operating voltage is 240 Volts AC.

Rated 5 with 20 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

In Stock Ships Today

Submit RFQ for IC697ACC624

Add more parts to quote

Description:

The GE Fanuc Automation IC697ACC624 fan assembly is used with the 5-slot GE Series 90-70 racks and the 9-slots RX7i racks to protect the racks and their connections from excessive heat. Its operating voltage is 240 Volts AC.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: A 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC697ACC624.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 20 reviews

    Technical Specifications for IC697ACC624

BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697ACC624
TypeRack fan assembly
FanTwo
Voltage240 Volts AC
Frequency50-60 Hertz
Input power16-20 Watts per fan
Line Amps0.09-0.14 Amps per fan
Operating temperature-28 to 70 degrees Celsius
Weight4 pounds
FilterPolyurethane Foam, 30 PPI
RetainerUL94V-0 Plastic
Retainer5-slot series 90-70 racks and the 9-slots RX7i racks
BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697ACC624
TypeRack fan assembly
FanTwo
Voltage240 Volts AC
Frequency50-60 Hertz
Input power16-20 Watts per fan
Line Amps0.09-0.14 Amps per fan
Operating temperature-28 to 70 degrees Celsius
Weight4 pounds
FilterPolyurethane Foam, 30 PPI
RetainerUL94V-0 Plastic
Retainer5-slot series 90-70 racks and the 9-slots RX7i racks
s

About IC697ACC624

The IC697ACC624 fan assembly is a fan assembly that has been manufactured by GE Fanuc Automation. These fans are mostly used in industrial environments where heat often builds up. Excessive heat in these types of environments can cause multiple damages to electronic components, or cause a sudden stop of machine operations as a safety measurement, and this is the main reason why fan assemblies like the IC697ACC624 fan assembly are required. It can cooling down the connections and the whole host machine system without affecting their regular operations. This type of equipment also helps application processes run smoothly. The GE Fanuc Automation IC697ACC624 fan assembly includes 2 different fans. These fans also come with a low-noise mechanism and they also employ ball bearings which help them to have a longer operating life.





Each one of the fans in the GE Fanuc Automation Series 90-70 IC697ACC624 fan assembly has an input power rating of 16 to 20 Watts and a line current rating of 0.09 to 0.14 Amps and both of them have an operating voltage rating of 240 Volts AC. The nominal airflow without a filter goes up to 108 CFM for each fan. The assembly comes with a polyurethane foam filter that is rated at 30 pores per square inch. The GE Fanuc Automation IC697ACC624 fan assembly can withstand an operating temperature range of -28 to 70 degrees Celsius and it comes with a UL94V-0 plastic retainer. Since this fan assembly comes with 2 fans, it is compatible with the 5-slot Series 90-70 racks and with the 9-slot RX7i racks. The whole assembly has an approximate weight of 4 pounds.



Repair Services for IC697ACC624

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697ACC624. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC697ACC624

Please refer to the manual for more information about the IC697ACC624 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697ACC624A
IC697ACC624-A, Series A, Rev A Request Quote
Common misspellings:
  • 1C697ACC624
  • IC697ACC62A
  • IC697ACC624

Dimensions For IC697ACC624

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC697ACC624

Resolutions For IC697ACC624

About

Technical Specifications for IC697ACC624

BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697ACC624
TypeRack fan assembly
FanTwo
Voltage240 Volts AC
Frequency50-60 Hertz
Input power16-20 Watts per fan
Line Amps0.09-0.14 Amps per fan
Operating temperature-28 to 70 degrees Celsius
Weight4 pounds
FilterPolyurethane Foam, 30 PPI
RetainerUL94V-0 Plastic
Retainer5-slot series 90-70 racks and the 9-slots RX7i racks
BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697ACC624
TypeRack fan assembly
FanTwo
Voltage240 Volts AC
Frequency50-60 Hertz
Input power16-20 Watts per fan
Line Amps0.09-0.14 Amps per fan
Operating temperature-28 to 70 degrees Celsius
Weight4 pounds
FilterPolyurethane Foam, 30 PPI
RetainerUL94V-0 Plastic
Retainer5-slot series 90-70 racks and the 9-slots RX7i racks

About IC697ACC624

The IC697ACC624 fan assembly is a fan assembly that has been manufactured by GE Fanuc Automation. These fans are mostly used in industrial environments where heat often builds up. Excessive heat in these types of environments can cause multiple damages to electronic components, or cause a sudden stop of machine operations as a safety measurement, and this is the main reason why fan assemblies like the IC697ACC624 fan assembly are required. It can cooling down the connections and the whole host machine system without affecting their regular operations. This type of equipment also helps application processes run smoothly. The GE Fanuc Automation IC697ACC624 fan assembly includes 2 different fans. These fans also come with a low-noise mechanism and they also employ ball bearings which help them to have a longer operating life.





Each one of the fans in the GE Fanuc Automation Series 90-70 IC697ACC624 fan assembly has an input power rating of 16 to 20 Watts and a line current rating of 0.09 to 0.14 Amps and both of them have an operating voltage rating of 240 Volts AC. The nominal airflow without a filter goes up to 108 CFM for each fan. The assembly comes with a polyurethane foam filter that is rated at 30 pores per square inch. The GE Fanuc Automation IC697ACC624 fan assembly can withstand an operating temperature range of -28 to 70 degrees Celsius and it comes with a UL94V-0 plastic retainer. Since this fan assembly comes with 2 fans, it is compatible with the 5-slot Series 90-70 racks and with the 9-slot RX7i racks. The whole assembly has an approximate weight of 4 pounds.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697ACC624. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697ACC624. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC697ACC624 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697ACC624A
IC697ACC624/A, Series A, Rev A Request Quote

Common misspellings:
  • IC697ACC62A
  • IC697ACC624
PDF