IC697ACC744 - In Stock | GE Fanuc - GE IP - Emerson Series 90-70

IC697ACC744

Rated 4.9 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC697ACC744

Revisions: D 
Description: The IC697ACC744 Rack Fan Assembly is a rack cooling fan manufactured by GE Fanuc. It comes with 3 fans, 24 Volts DC of operating voltage, and 6.7 Watts of input power. It weighs 5.94 pounds.
In Stock Ships Today
Request a quote for IC697ACC744

Description:

The IC697ACC744 Rack Fan Assembly is a rack cooling fan manufactured by GE Fanuc. It comes with 3 fans, 24 Volts DC of operating voltage, and 6.7 Watts of input power. It weighs 5.94 pounds.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: D 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC697ACC744.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 13 reviews

    Technical Specifications for IC697ACC744

BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697ACC744
Product Description Rack Fan Assembly
No. of Fans 3
Operating Voltage 24 Volts DC
Input Power 6.7 Watts
Line Amps 0.28 Amps
Locked Rotor Amps 0.70 Amps
Operating Temperature -28 to 70 degree Celsius
Retainer & Guard UL94V-0 Plastic
Filter Type Polyurethane Foam, 30 PPI
Weight5.94 Pounds
BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697ACC744
Product Description Rack Fan Assembly
No. of Fans 3
Operating Voltage 24 Volts DC
Input Power 6.7 Watts
Line Amps 0.28 Amps
Locked Rotor Amps 0.70 Amps
Operating Temperature -28 to 70 degree Celsius
Retainer & Guard UL94V-0 Plastic
Filter Type Polyurethane Foam, 30 PPI
Weight5.94 Pounds
s

About IC697ACC744

The IC697ACC744 Rack Fan Assembly is a cooling fan assembly with 3 fans made by GE Fanuc. This assembly can be mounted on a 9-slot rack to reduce the heat problems that are common in industrial settings. The IC697ACC744 Rack Fan Assembly comes as a kit that consists of the fan assembly, 8 screws, and additional mounting brackets which are useful when connecting the assembly to older rack models. The 24 Volts DC rack assembly connection is made by connecting 24 AWG leads, which are located on each fan, so that they are paralleled with the positive lead of the power source, and also by grounding all the negative leads. The retainer and the guard of the cooling fan assembly are made from UL94V-0 plastic and the filter type is polyurethane foam, 30 PPI. The IC697 PLC and the rack cooling fans must share the same power source to make sure that the fans are running when the PLC is in the active mode.



 



The IC697ACC744 Rack Fan Assembly is designed to mount on both older and newer PLC racks. It acts as the primary tool of the thermal management system within the enclosure. This cooling fan assembly provides direct cooling and airflow while dissipating the generated heat inside the enclosure. Some of the important specifications of this device are that it is suitable to use with IC697 standard 9-slot racks and that it has an extended life thanks to its ball bearings. The IC697ACC744 Rack Fan Assembly can be used with IC697 racks such as the IC697CHS791D, IC697CHS783A, and the IC697CHS782A. It is recommended to mount the fan assembly on the bottom of the rack in such a way that the airflow moves from the bottom towards the top. It comes with an easily removable plastic retainer and a polyurethane filter. The filter offers low airflow resistance to provide optimal performance for a wide variety of applications.



Repair Services for IC697ACC744

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697ACC744. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC697ACC744

Please refer to the manual for more information about the IC697ACC744 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697ACC744D
IC697ACC744-D, Series D, Rev D Request Quote
Common misspellings:
  • 1C697ACC744
  • IC697ACC7A4
  • IC697ACC74A
  • IC697ACC744

Dimensions For IC697ACC744

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC697ACC744

Resolutions For IC697ACC744

About

Technical Specifications for IC697ACC744

BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697ACC744
Product Description Rack Fan Assembly
No. of Fans 3
Operating Voltage 24 Volts DC
Input Power 6.7 Watts
Line Amps 0.28 Amps
Locked Rotor Amps 0.70 Amps
Operating Temperature -28 to 70 degree Celsius
Retainer & Guard UL94V-0 Plastic
Filter Type Polyurethane Foam, 30 PPI
Weight5.94 Pounds
BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697ACC744
Product Description Rack Fan Assembly
No. of Fans 3
Operating Voltage 24 Volts DC
Input Power 6.7 Watts
Line Amps 0.28 Amps
Locked Rotor Amps 0.70 Amps
Operating Temperature -28 to 70 degree Celsius
Retainer & Guard UL94V-0 Plastic
Filter Type Polyurethane Foam, 30 PPI
Weight5.94 Pounds

About IC697ACC744

The IC697ACC744 Rack Fan Assembly is a cooling fan assembly with 3 fans made by GE Fanuc. This assembly can be mounted on a 9-slot rack to reduce the heat problems that are common in industrial settings. The IC697ACC744 Rack Fan Assembly comes as a kit that consists of the fan assembly, 8 screws, and additional mounting brackets which are useful when connecting the assembly to older rack models. The 24 Volts DC rack assembly connection is made by connecting 24 AWG leads, which are located on each fan, so that they are paralleled with the positive lead of the power source, and also by grounding all the negative leads. The retainer and the guard of the cooling fan assembly are made from UL94V-0 plastic and the filter type is polyurethane foam, 30 PPI. The IC697 PLC and the rack cooling fans must share the same power source to make sure that the fans are running when the PLC is in the active mode.



 



The IC697ACC744 Rack Fan Assembly is designed to mount on both older and newer PLC racks. It acts as the primary tool of the thermal management system within the enclosure. This cooling fan assembly provides direct cooling and airflow while dissipating the generated heat inside the enclosure. Some of the important specifications of this device are that it is suitable to use with IC697 standard 9-slot racks and that it has an extended life thanks to its ball bearings. The IC697ACC744 Rack Fan Assembly can be used with IC697 racks such as the IC697CHS791D, IC697CHS783A, and the IC697CHS782A. It is recommended to mount the fan assembly on the bottom of the rack in such a way that the airflow moves from the bottom towards the top. It comes with an easily removable plastic retainer and a polyurethane filter. The filter offers low airflow resistance to provide optimal performance for a wide variety of applications.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697ACC744. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697ACC744. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC697ACC744 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697ACC744D
IC697ACC744/D, Series D, Rev D Request Quote

Common misspellings:
  • IC697ACC7A4
  • IC697ACC74A
  • IC697ACC744
PDF