IC697BEM763 | GE Fanuc - GE IP - Emerson Series 90-70

IC697BEM763

Rated 4.9 with 13 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC697BEM763

Description: The IC697BEM763 module is an interface module manufactured by GE Fanuc. It is an industrial automation device and is used with the GE Series 90-70 PLCs and VME racks. It is a programmable controller device that comes with a single-slot module and provides an enhanced interface between local area networks and the PLC system. The module allows DC300, AC2000, and DC2000 drives to be configured and controlled by the PLC application program. This interface module is equipped with an 80C186 microprocessor with a clocked speed of 12 Mhz. read more...
Available Now
Request a quote for IC697BEM763

Description: The IC697BEM763 module is an interface module manufactured by GE Fanuc. It is an industrial automation device and is used with the GE Series 90-70 PLCs and VME racks. It is a programmable controller device that comes with a single-slot module and provides an enhanced interface between local area networks and the PLC system. The module allows DC300, AC2000, and DC2000 drives to be configured and controlled by the PLC application program. This interface module is equipped with an 80C186 microprocessor with a clocked speed of 12 Mhz. read more...

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC697BEM763.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.9 with 13 reviews

    Technical Specifications for IC697BEM763

BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697BEM763
DescriptionInterface module
SeriesSeries 90-70
Temperature0-60 degrees Celsius
Microprocessor80C186
Clockspeed12 Mhz
Relative Humidity5 to 95%
Number of LEDs3
BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697BEM763
DescriptionInterface module
SeriesSeries 90-70
Temperature0-60 degrees Celsius
Microprocessor80C186
Clockspeed12 Mhz
Relative Humidity5 to 95%
Number of LEDs3
s

About IC697BEM763

The IC697BEM763 module is an interface module manufactured by GE Fanuc. It is an industrial automation device and is used with the GE Series 90-70 PLCs and VME racks. It is a programmable controller device that comes with a single-slot module and provides an enhanced interface between local area networks and the PLC system. The module allows DC300, AC2000, and DC2000 drives to be configured and controlled by the PLC application program. This interface module is equipped with an 80C186 microprocessor with a clocked speed of 12 Mhz. The IC697BEM763 module uses 3 status LEDs for different events. The "Module OK LED" shows the present operating status of the interface module. This LED indicator flashes during the diagnostics process. The other LEDs are the "Command Out LED", and the "Data In LED." The "Command Out LED" illuminates during the self-test process and flashes when a command from the PLC is sent to a network drop. The "Data In LED" blinks when a data message is received from the network drop.



 



The GE Fanuc Series 90-70 IC697BEM763 module fully complies with the FCC and the VME standards. The operating temperature of the module ranges between 0 and 60 degrees Celsius with non-condensing 5 to 95% ambient relative humidity. The IC697BEM763 module comes with a restart button that will halt the DLAN communication and perform internal tests on the module. The 8-pin DLAN network connector in the module provides a connection from the DLAN module to the network. The IC697BEM763 module supports both DLAN and DLAN+ network protocols. The DLAN protocol is a multidrop serial protocol whereas the DLAN+ protocol is a high-speed protocol based on the ARCnet network.



Technical Description of IC697BEM763

The IC697BEM763 module is a GE Fanuc interface module. It is used with the Series 90-70 PLC system.

Repair Services for IC697BEM763

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697BEM763. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC697BEM763

Please refer to the manual for more information about the IC697BEM763 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
Common misspellings:
  • 1C697BEM763
  • IC6978EM763
  • IC697BEM763

Dimensions For IC697BEM763

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC697BEM763

Resolutions For IC697BEM763

About

Technical Specifications for IC697BEM763

BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697BEM763
DescriptionInterface module
SeriesSeries 90-70
Temperature0-60 degrees Celsius
Microprocessor80C186
Clockspeed12 Mhz
Relative Humidity5 to 95%
Number of LEDs3
BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697BEM763
DescriptionInterface module
SeriesSeries 90-70
Temperature0-60 degrees Celsius
Microprocessor80C186
Clockspeed12 Mhz
Relative Humidity5 to 95%
Number of LEDs3

About IC697BEM763

The IC697BEM763 module is an interface module manufactured by GE Fanuc. It is an industrial automation device and is used with the GE Series 90-70 PLCs and VME racks. It is a programmable controller device that comes with a single-slot module and provides an enhanced interface between local area networks and the PLC system. The module allows DC300, AC2000, and DC2000 drives to be configured and controlled by the PLC application program. This interface module is equipped with an 80C186 microprocessor with a clocked speed of 12 Mhz. The IC697BEM763 module uses 3 status LEDs for different events. The "Module OK LED" shows the present operating status of the interface module. This LED indicator flashes during the diagnostics process. The other LEDs are the "Command Out LED", and the "Data In LED." The "Command Out LED" illuminates during the self-test process and flashes when a command from the PLC is sent to a network drop. The "Data In LED" blinks when a data message is received from the network drop.



 



The GE Fanuc Series 90-70 IC697BEM763 module fully complies with the FCC and the VME standards. The operating temperature of the module ranges between 0 and 60 degrees Celsius with non-condensing 5 to 95% ambient relative humidity. The IC697BEM763 module comes with a restart button that will halt the DLAN communication and perform internal tests on the module. The 8-pin DLAN network connector in the module provides a connection from the DLAN module to the network. The IC697BEM763 module supports both DLAN and DLAN+ network protocols. The DLAN protocol is a multidrop serial protocol whereas the DLAN+ protocol is a high-speed protocol based on the ARCnet network.



Technical Description of IC697BEM763

The IC697BEM763 module is a GE Fanuc interface module. It is used with the Series 90-70 PLC system.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697BEM763. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697BEM763. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

PDF