IC697CHS750 - In Stock | GE Fanuc - GE IP - Emerson Series 90-70

IC697CHS750

Rated 5 with 5 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC697CHS750

Revisions: C D E G 
Description: The IC697CHS750 rack is an I/O mounting rack. It is part of the Series 90-70 PLC product line and it is manufactured by GE Fanuc.
In Stock Ships Today
Request a quote for IC697CHS750

Description:

The IC697CHS750 rack is an I/O mounting rack. It is part of the Series 90-70 PLC product line and it is manufactured by GE Fanuc.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: C D E G 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC697CHS750.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 5 with 5 reviews

    Technical Specifications for IC697CHS750

BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697CHS750
DescriptionRear mount I/O rack
Current20 Amperes
Voltage5 Volts DC
Slots5
Dimension11.15 x 12.60 x 7.5 inches
Rack enclosure254 millimeters deep
Weight2 Kilograms
CoolingConvection cooling
EnclosureOpen Enclosure
CompatibilityIC697 PLC series
BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697CHS750
DescriptionRear mount I/O rack
Current20 Amperes
Voltage5 Volts DC
Slots5
Dimension11.15 x 12.60 x 7.5 inches
Rack enclosure254 millimeters deep
Weight2 Kilograms
CoolingConvection cooling
EnclosureOpen Enclosure
CompatibilityIC697 PLC series
s

About IC697CHS750

The IC697CHS750 rack is an I/O rack manufactured by GE Fanuc. It connects different components and modules from the GE Series 90-70 PLC product line together. It is equipped with 5 slots and it has a rear mounting mechanism. The rack has an open enclosure and it is suitable for indoor use only. It can be easily mounted on a factory floor. The components that are connected in the 5 slots can have individual power supplies of their own on the left side of the module position. The rack is compact in size and it weighs around 2 kilograms. It has dimensions of 11.15 inches in height, 12.60 inches in width, and 7.5 inches in depth. The enclosure of the rack is 254 millimeters deep. The IC697CHS750 rack uses airflow to prevent overheating. For convection cooling, the flow of air between the I/O rack and the nearest air outlet should not be obstructed.



 



The GE Fanuc Series 90-70 IC697CHS750 I/O rack comes with a current rating of 20 Amps. It runs with a voltage supply of 5 Volts DC. The rack supports additional accessories including the backplane J2 jumper kit that is useful during the installation process. The rack is equipped with a removable terminal block that can be accessed through the hinged door. The cable to the rack is passed through the bottom of the hinged door. An I/O terminal restraining strap is present on the side of the rack that holds the terminal firmly in place. The power supply connector is situated on the inside of the rack along with the spacer. The system noise can be eliminated by using grounding measures.



Repair Services for IC697CHS750

Type Lead Time Price Action
Repair Service 2-4 weeks $180cartAdd to Cart

Our highly skilled technicians can repair your IC697CHS750. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC697CHS750

Please refer to the manual for more information about the IC697CHS750 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697CHS750C
IC697CHS750-C, Series C, Rev C Request Quote
IC697CHS750D
IC697CHS750-D, Series D, Rev D Request Quote
IC697CHS750E
IC697CHS750-E, Series E, Rev E Request Quote
IC697CHS750G
IC697CHS750-G, Series G, Rev G Request Quote
Common misspellings:
  • 1C697CHS750
  • IC697CHS75o
  • IC697CHS750

Dimensions For IC697CHS750

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC697CHS750

Resolutions For IC697CHS750

About

Technical Specifications for IC697CHS750

BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697CHS750
DescriptionRear mount I/O rack
Current20 Amperes
Voltage5 Volts DC
Slots5
Dimension11.15 x 12.60 x 7.5 inches
Rack enclosure254 millimeters deep
Weight2 Kilograms
CoolingConvection cooling
EnclosureOpen Enclosure
CompatibilityIC697 PLC series
BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697CHS750
DescriptionRear mount I/O rack
Current20 Amperes
Voltage5 Volts DC
Slots5
Dimension11.15 x 12.60 x 7.5 inches
Rack enclosure254 millimeters deep
Weight2 Kilograms
CoolingConvection cooling
EnclosureOpen Enclosure
CompatibilityIC697 PLC series

About IC697CHS750

The IC697CHS750 rack is an I/O rack manufactured by GE Fanuc. It connects different components and modules from the GE Series 90-70 PLC product line together. It is equipped with 5 slots and it has a rear mounting mechanism. The rack has an open enclosure and it is suitable for indoor use only. It can be easily mounted on a factory floor. The components that are connected in the 5 slots can have individual power supplies of their own on the left side of the module position. The rack is compact in size and it weighs around 2 kilograms. It has dimensions of 11.15 inches in height, 12.60 inches in width, and 7.5 inches in depth. The enclosure of the rack is 254 millimeters deep. The IC697CHS750 rack uses airflow to prevent overheating. For convection cooling, the flow of air between the I/O rack and the nearest air outlet should not be obstructed.



 



The GE Fanuc Series 90-70 IC697CHS750 I/O rack comes with a current rating of 20 Amps. It runs with a voltage supply of 5 Volts DC. The rack supports additional accessories including the backplane J2 jumper kit that is useful during the installation process. The rack is equipped with a removable terminal block that can be accessed through the hinged door. The cable to the rack is passed through the bottom of the hinged door. An I/O terminal restraining strap is present on the side of the rack that holds the terminal firmly in place. The power supply connector is situated on the inside of the rack along with the spacer. The system noise can be eliminated by using grounding measures.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $180cartAdd to Cart

Our highly skilled technicians can repair your IC697CHS750. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $180cartAdd to Cart

Our highly skilled technicians can repair your IC697CHS750. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC697CHS750 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697CHS750C
IC697CHS750/C, Series C, Rev C Request Quote
IC697CHS750D
IC697CHS750/D, Series D, Rev D Request Quote
IC697CHS750E
IC697CHS750/E, Series E, Rev E Request Quote
IC697CHS750G
IC697CHS750/G, Series G, Rev G Request Quote

Common misspellings:
  • IC697CHS75o
  • IC697CHS750
PDF