IC697CHS771 - In Stock | GE Fanuc - GE IP - Emerson Series 90-70

IC697CHS771

IC697CHS771

Revisions: C 
Description:

The GE Fanuc IC697CHS771 rack is a Series 90-70 rack for hosting modules in a PLC setup. It comes with 6 slots for each system and it can support 2 different systems at a time.

Rated 4.7 with 14 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

In Stock Ships Today

Submit RFQ for IC697CHS771

Add more parts to quote

Description:

The GE Fanuc IC697CHS771 rack is a Series 90-70 rack for hosting modules in a PLC setup. It comes with 6 slots for each system and it can support 2 different systems at a time.


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: C 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC697CHS771.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 14 reviews

    Technical Specifications for IC697CHS771

ManufacturerGE Fanuc
SeriesSeries 90-70
Part NumberIC697CHS771
Product TypePLC Rack
Number of Slots6
Number of Systems Supported2
I/O Bus Current0.5 Amps
Voltage TypeAC and DC
Current Draw20, 11, and 18 Amps
Maximum System Cable Length50 Feet
ManufacturerGE Fanuc
SeriesSeries 90-70
Part NumberIC697CHS771
Product TypePLC Rack
Number of Slots6
Number of Systems Supported2
I/O Bus Current0.5 Amps
Voltage TypeAC and DC
Current Draw20, 11, and 18 Amps
Maximum System Cable Length50 Feet
s

About IC697CHS771

The IC697CHS771 PLC rack has been designed and manufactured by GE Fanuc in GE Series 90-70. It is a rack for programmable logic controllers or PLCs that comes with 6 slots per system and it can support 2 systems at a time. The IC697CHS771 PLC rack can be used as a part of different PLCs with a variety of different setups. The 6 slots on the IC697CHS771 PLC rack are used to host a variety of modules and I/O. This rack requires 0.5 Amps of current from the PLC I/O bus in order to operate. It can draw 20 Amps of current with 100 Watts of power from either a 120/240 Volts AC power supply or from a 125 Volts DC power supply. 



 



Additionally, the GE Fanuc Series 90-70 IC697CHS771 PLC rack can draw 11 Amps of current with 55 Watts of power from a 120/240 Volts AC power supply or a 125 Volts DC power supply, and 18 Amps of current with 90 Watts of power from both a 24 Volts DC power supply and a 48 Volts DC power supply. For safety, the IC697CHS771 PLC rack and all the other racks in the PLC setup must have the same ground potential, and the cable that connects the Bus Transmitter Module (BTM) to the last Bus Receiver Module (BRM) in the PLC must not be more than 50 feet long. In addition to the 6 slots for hosting different PLC devices, the IC697CHS771 PLC rack has an extra specialized slot on the far left side of the other slots for hosting the power supply.



Repair Services for IC697CHS771

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697CHS771. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC697CHS771

Please refer to the manual for more information about the IC697CHS771 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697CHS771C
IC697CHS771-C, Series C, Rev C Request Quote
Common misspellings:
  • 1C697CHS771
  • IC697CHS77l
  • IC697CHS771

Dimensions For IC697CHS771

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC697CHS771

Resolutions For IC697CHS771

About

Technical Specifications for IC697CHS771

ManufacturerGE Fanuc
SeriesSeries 90-70
Part NumberIC697CHS771
Product TypePLC Rack
Number of Slots6
Number of Systems Supported2
I/O Bus Current0.5 Amps
Voltage TypeAC and DC
Current Draw20, 11, and 18 Amps
Maximum System Cable Length50 Feet
ManufacturerGE Fanuc
SeriesSeries 90-70
Part NumberIC697CHS771
Product TypePLC Rack
Number of Slots6
Number of Systems Supported2
I/O Bus Current0.5 Amps
Voltage TypeAC and DC
Current Draw20, 11, and 18 Amps
Maximum System Cable Length50 Feet

About IC697CHS771

The IC697CHS771 PLC rack has been designed and manufactured by GE Fanuc in GE Series 90-70. It is a rack for programmable logic controllers or PLCs that comes with 6 slots per system and it can support 2 systems at a time. The IC697CHS771 PLC rack can be used as a part of different PLCs with a variety of different setups. The 6 slots on the IC697CHS771 PLC rack are used to host a variety of modules and I/O. This rack requires 0.5 Amps of current from the PLC I/O bus in order to operate. It can draw 20 Amps of current with 100 Watts of power from either a 120/240 Volts AC power supply or from a 125 Volts DC power supply. 



 



Additionally, the GE Fanuc Series 90-70 IC697CHS771 PLC rack can draw 11 Amps of current with 55 Watts of power from a 120/240 Volts AC power supply or a 125 Volts DC power supply, and 18 Amps of current with 90 Watts of power from both a 24 Volts DC power supply and a 48 Volts DC power supply. For safety, the IC697CHS771 PLC rack and all the other racks in the PLC setup must have the same ground potential, and the cable that connects the Bus Transmitter Module (BTM) to the last Bus Receiver Module (BRM) in the PLC must not be more than 50 feet long. In addition to the 6 slots for hosting different PLC devices, the IC697CHS771 PLC rack has an extra specialized slot on the far left side of the other slots for hosting the power supply.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697CHS771. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697CHS771. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC697CHS771 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697CHS771C
IC697CHS771/C, Series C, Rev C Request Quote

Common misspellings:
  • IC697CHS77l
  • IC697CHS771
PDF