IC697CPM790

Rated 4.7 with 8 reviews

Preowned

Includes a 1-Year DO Supply warranty.

DO Supply is not an authorized distributor for GE Fanuc.

top legal disclaimer
top legal disclaimer

credit cards accepted
better business bureau

IC697CPM790

Revisions: CB CC DC ED FD GD 
Description: The GE Fanuc IC697CPM790 is a Series 90-70 Programmable Logic Controller (PLC) CPU. This CPU is specifically designed for use in Emergency Shut-Down (ESD), fire and gas, and other critical applications. This CPU has a built-in memory of 1 MB battery backed memory and supports up Triple Modular Redundancy (TMR). This CPU is equipped with 64 MHz, 80486DX2 microprocessor and scan rate of 0.4 microseconds per boolean function.
In Stock Ships Today
Request a quote for IC697CPM790

Description: The GE Fanuc IC697CPM790 is a Series 90-70 Programmable Logic Controller (PLC) CPU. This CPU is specifically designed for use in Emergency Shut-Down (ESD), fire and gas, and other critical applications. This CPU has a built-in memory of 1 MB battery backed memory and supports up Triple Modular Redundancy (TMR). This CPU is equipped with 64 MHz, 80486DX2 microprocessor and scan rate of 0.4 microseconds per boolean function.

Preowned

Includes a 1-Year DO Supply warranty.

DO Supply is not an authorized distributor for GE Fanuc.

top legal disclaimer
disclaimer
credit cards
better business bureau
Revisions: CB CC DC ED FD GD 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via DHL, UPS, Fedex, and TNT
Repairs: We offer repair service for the IC697CPM790.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 8 reviews

    Technical Specifications for IC697CPM790

ManufacturerGE Fanuc
SeriesSeries 90-70
Part NumberIC697CPM790
Number of Installation Slots1
Number of LEDs4
Configurable Program and Data MemorySupported
Specialty functionTriple Modular Redundancy (TMR)
Microprocessor64 MHz, 80486DX2 microprocessor
Boolean execution0.4 microseconds per boolean function
Supported I/OUp to 12K discrete inputs and outputs (any mix -simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs; Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs
Memory1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)
Communication PortOne (1) 15-pin sub-D connector
Serial protocol supportRS485
ApplicationsEmergency Shutdown, Fire, Gas and other critical application
Product TypeCPU
Communication RouteThrough the Backplane
Emergency Shutdown FunctionsSupported
Standalone C ProgramRequired
ManufacturerGE Fanuc
SeriesSeries 90-70
Part NumberIC697CPM790
Number of Installation Slots1
Number of LEDs4
Configurable Program and Data MemorySupported
Specialty functionTriple Modular Redundancy (TMR)
Microprocessor64 MHz, 80486DX2 microprocessor
Boolean execution0.4 microseconds per boolean function
Supported I/OUp to 12K discrete inputs and outputs (any mix -simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs; Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs
Memory1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)
Communication PortOne (1) 15-pin sub-D connector
Serial protocol supportRS485
ApplicationsEmergency Shutdown, Fire, Gas and other critical application
Product TypeCPU
Communication RouteThrough the Backplane
Emergency Shutdown FunctionsSupported
Standalone C ProgramRequired
s

About IC697CPM790

The IC697CPM790 is a Series 90-70 Programmable Logic Controller (PLC) CPU. This CPU is a single slot wide module that is specifically used for critical applications such as Emergency shutdown systems, fire, gas and other applications. This CPU supports Triple Media Redundancy (TMR) by incorporating Standalone C program for enabling autotest routines as well.

The IC697CPM790 features 1 MB of battery-backed memory with up to 512KB available for utilization by the user program configured using ladder diagram programming language. This CPU supports up to 12K discrete input and output points, of any combination, when configured in simplex mode; 2048 voted discrete inputs and 2048 voted discrete outputs. Similarly, the IC697CPM790 is capable of handling up to 8K analog inputs and outputs, of any combination when operated in simplex mode and 1024 voted analog inputs. It is equipped with an 80486DX2 microprocessor with clock speed of 64 MHz. This CPU exhibits a relatively fast scan rate of 0.4 microseconds per boolean function, suitable for use in critical applications.

The IC697CPM790 supports Triple Modular Redundancy (TMR), utilized to allow the system without the chance of downtime. This TMR set-up is basically comprised of Triple PLC Racks with each rack having One (1) IC697CPM790 CPU, Triple Genius I/O Busses, as well as Triple input sensors and Triple output loads.

The IC697CPM790 comes with One (1) 15-pin sub-D connector allowing communication with RS485 compatible devices. Other forms of communication such as connection to a programming computer may be established with the use of RS-422/RS-485 to RS-232 Converter with part number IC690ACC900 or RS-232 to RS-422 Miniconverter with part number IC690ACC901.

The IC697CPM790 programmable controller CPU is also suitable for critical industrial and commercial safety-related applications such as fire and gas-related applications and ESD or Emergency Shutdown systems. It is programmed using the Windows or MS-DOS software and able to communicate with the I/O modules and the smart option modules in the same PLC system that it is installed in through the rack-mounted backplane. The IC697CPM790 programmable controller CPU cannot operate unless a Standalone C program is included as part of the loaded application program for the CPU.

The IC697CPM790 programmable controller CPU must be used with a Standalone C program for operating TMR or Triple Modular Redundancy and autotest and operating routines. This CPU has 1 MB of battery-backed memory and up to 512 KB of memory is available for ladder diagram program. The IC697CPM790 programmable controller CPU can handle up to 12,000 discrete inputs and outputs in any mix as long as the inputs and outputs are all in the simplex mode, and it can handle up to 2048 discrete inputs and up to 2048 discrete outputs. Other features of this CPU include configurable program and data memory, 4 status indicator LEDs, password-controlled machine access, a 3-position operation mode control switch, and a calendar clock that is battery-backed.

FAQ for IC697CPM790

What are suitable applications for use with the IC697CPM790?


The IC697CPM790 is especially design for use in Emergency Shut-Down (ESD), fire and gas, and other critical applications.

What is the scan rate of the IC697CPM790?


The IC697CPM790’s scan rate is 0.4 microseconds per boolean function.

What is the supported number I/O points by the IC697CPM790?


The IC697CPM790 supports up to 12K discrete input and output points, of any combination, when configured in simplex mode; 2048 voted discrete inputs and 2048 voted discrete outputs. Similarly, the IC697CPM790 is capable of handling up to 8K analog inputs and outputs, of any combination when operated in simplex mode and 1024 voted analog inputs

Technical Description of IC697CPM790

The GE Fanuc IC697CPM790 CPU is made to be a CPU in a Series 90-70 PLC system. It can handle Emergency Shutdown or ESD functions and it can handle 12,000 discrete inputs and outputs in the simplex mode.

Repair Services for IC697CPM790

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697CPM790. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC697CPM790

Please refer to the manual for more information about the IC697CPM790 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697CPM790CB
IC697CPM790-CB, Series CB, Rev CB Request Quote
IC697CPM790CC
IC697CPM790-CC, Series CC, Rev CC Request Quote
IC697CPM790DC
IC697CPM790-DC, Series DC, Rev DC Request Quote
IC697CPM790ED
IC697CPM790-ED, Series ED, Rev ED Request Quote
IC697CPM790FD
IC697CPM790-FD, Series FD, Rev FD Request Quote
IC697CPM790GD
IC697CPM790-GD, Series GD, Rev GD Request Quote
Common misspellings:
  • 1C697CPM790
  • IC697CPM79o
  • IC697CPM790

Reviews for IC697CPM790

Internal Review

"The IC697CPM790 is a GE Fanuc Serie 90-70 Programmable Logic Controller (PLC) CPU. This CPU supports Triple Modular Redundancy (TMR) for use especially in critical applications. This is not an average and standard as this CPU serves a very specific purpose of providing high-availability, higher than redundant CPU configuration. " -DO Supply Tech

Dimensions For IC697CPM790

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC697CPM790

Resolutions For IC697CPM790

About

Technical Specifications for IC697CPM790

ManufacturerGE Fanuc
SeriesSeries 90-70
Part NumberIC697CPM790
Number of Installation Slots1
Number of LEDs4
Configurable Program and Data MemorySupported
Specialty functionTriple Modular Redundancy (TMR)
Microprocessor64 MHz, 80486DX2 microprocessor
Boolean execution0.4 microseconds per boolean function
Supported I/OUp to 12K discrete inputs and outputs (any mix -simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs; Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs
Memory1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)
Communication PortOne (1) 15-pin sub-D connector
Serial protocol supportRS485
ApplicationsEmergency Shutdown, Fire, Gas and other critical application
Product TypeCPU
Communication RouteThrough the Backplane
Emergency Shutdown FunctionsSupported
Standalone C ProgramRequired
ManufacturerGE Fanuc
SeriesSeries 90-70
Part NumberIC697CPM790
Number of Installation Slots1
Number of LEDs4
Configurable Program and Data MemorySupported
Specialty functionTriple Modular Redundancy (TMR)
Microprocessor64 MHz, 80486DX2 microprocessor
Boolean execution0.4 microseconds per boolean function
Supported I/OUp to 12K discrete inputs and outputs (any mix -simplex mode only); 2048 voted discrete inputs, 2048 voted discrete outputs; Up to 8K analog inputs (simplex mode only) and 8K analog outputs (simplex mode only); 1024 voted analog inputs
Memory1 Mbyte of battery-backed memory in the same slot (up to 512 Kbytes available for use by ladder diagram application program)
Communication PortOne (1) 15-pin sub-D connector
Serial protocol supportRS485
ApplicationsEmergency Shutdown, Fire, Gas and other critical application
Product TypeCPU
Communication RouteThrough the Backplane
Emergency Shutdown FunctionsSupported
Standalone C ProgramRequired

About IC697CPM790

The IC697CPM790 is a Series 90-70 Programmable Logic Controller (PLC) CPU. This CPU is a single slot wide module that is specifically used for critical applications such as Emergency shutdown systems, fire, gas and other applications. This CPU supports Triple Media Redundancy (TMR) by incorporating Standalone C program for enabling autotest routines as well.

The IC697CPM790 features 1 MB of battery-backed memory with up to 512KB available for utilization by the user program configured using ladder diagram programming language. This CPU supports up to 12K discrete input and output points, of any combination, when configured in simplex mode; 2048 voted discrete inputs and 2048 voted discrete outputs. Similarly, the IC697CPM790 is capable of handling up to 8K analog inputs and outputs, of any combination when operated in simplex mode and 1024 voted analog inputs. It is equipped with an 80486DX2 microprocessor with clock speed of 64 MHz. This CPU exhibits a relatively fast scan rate of 0.4 microseconds per boolean function, suitable for use in critical applications.

The IC697CPM790 supports Triple Modular Redundancy (TMR), utilized to allow the system without the chance of downtime. This TMR set-up is basically comprised of Triple PLC Racks with each rack having One (1) IC697CPM790 CPU, Triple Genius I/O Busses, as well as Triple input sensors and Triple output loads.

The IC697CPM790 comes with One (1) 15-pin sub-D connector allowing communication with RS485 compatible devices. Other forms of communication such as connection to a programming computer may be established with the use of RS-422/RS-485 to RS-232 Converter with part number IC690ACC900 or RS-232 to RS-422 Miniconverter with part number IC690ACC901.

The IC697CPM790 programmable controller CPU is also suitable for critical industrial and commercial safety-related applications such as fire and gas-related applications and ESD or Emergency Shutdown systems. It is programmed using the Windows or MS-DOS software and able to communicate with the I/O modules and the smart option modules in the same PLC system that it is installed in through the rack-mounted backplane. The IC697CPM790 programmable controller CPU cannot operate unless a Standalone C program is included as part of the loaded application program for the CPU.

The IC697CPM790 programmable controller CPU must be used with a Standalone C program for operating TMR or Triple Modular Redundancy and autotest and operating routines. This CPU has 1 MB of battery-backed memory and up to 512 KB of memory is available for ladder diagram program. The IC697CPM790 programmable controller CPU can handle up to 12,000 discrete inputs and outputs in any mix as long as the inputs and outputs are all in the simplex mode, and it can handle up to 2048 discrete inputs and up to 2048 discrete outputs. Other features of this CPU include configurable program and data memory, 4 status indicator LEDs, password-controlled machine access, a 3-position operation mode control switch, and a calendar clock that is battery-backed.

FAQ for IC697CPM790

What are suitable applications for use with the IC697CPM790?


The IC697CPM790 is especially design for use in Emergency Shut-Down (ESD), fire and gas, and other critical applications.

What is the scan rate of the IC697CPM790?


The IC697CPM790’s scan rate is 0.4 microseconds per boolean function.

What is the supported number I/O points by the IC697CPM790?


The IC697CPM790 supports up to 12K discrete input and output points, of any combination, when configured in simplex mode; 2048 voted discrete inputs and 2048 voted discrete outputs. Similarly, the IC697CPM790 is capable of handling up to 8K analog inputs and outputs, of any combination when operated in simplex mode and 1024 voted analog inputs

Technical Description of IC697CPM790

The GE Fanuc IC697CPM790 CPU is made to be a CPU in a Series 90-70 PLC system. It can handle Emergency Shutdown or ESD functions and it can handle 12,000 discrete inputs and outputs in the simplex mode.

Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697CPM790. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697CPM790. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC697CPM790 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697CPM790-CB
IC697CPM790/CB, Series CB, Rev CB Request Quote
IC697CPM790-CC
IC697CPM790/CC, Series CC, Rev CC Request Quote
IC697CPM790-DC
IC697CPM790/DC, Series DC, Rev DC Request Quote
IC697CPM790-ED
IC697CPM790/ED, Series ED, Rev ED Request Quote
IC697CPM790-FD
IC697CPM790/FD, Series FD, Rev FD Request Quote
IC697CPM790-GD
IC697CPM790/GD, Series GD, Rev GD Request Quote

Common misspellings:
  • IC697CPM79o
  • IC697CPM790
PDF
Reviews

Reviews for IC697CPM790

Internal Review

"The IC697CPM790 is a GE Fanuc Serie 90-70 Programmable Logic Controller (PLC) CPU. This CPU supports Triple Modular Redundancy (TMR) for use especially in critical applications. This is not an average and standard as this CPU serves a very specific purpose of providing high-availability, higher than redundant CPU configuration. " -DO Supply Tech