IC697CPM915 - In Stock | GE Fanuc - GE IP - Emerson Series 90-70

×

IC697CPM915

Rated 4.7 with 15 reviews
About | Product Specifications

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC697CPM915

Revisions: AB BB CC CF 
Description: The IC697CPM915 module is a CPU module for GE Fanuc Series 90-70 PLCs. The clocked speed of the processor in the IC697CPM915 module is 32 megahertz. 
In Stock Ships Today
Request a quote for IC697CPM915

Description:

The IC697CPM915 module is a CPU module for GE Fanuc Series 90-70 PLCs. The clocked speed of the processor in the IC697CPM915 module is 32 megahertz. 


About | Products Specs

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: AB BB CC CF 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC697CPM915.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.7 with 15 reviews

    Technical Specifications for IC697CPM915

BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697CPM915
Product type CPU module
CompatibilityGE Fanuc 90-70 PLCs
Clock speed32 megahertz
RAM1 Megabyte
Current draw2.8 Amps
Input voltage5 Volts DC
Serial port1
Operating temperature0 to 60 degrees Celsius
BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697CPM915
Product type CPU module
CompatibilityGE Fanuc 90-70 PLCs
Clock speed32 megahertz
RAM1 Megabyte
Current draw2.8 Amps
Input voltage5 Volts DC
Serial port1
Operating temperature0 to 60 degrees Celsius
s

About IC697CPM915

The GE Fanuc IC697CPM915 module is a single-slot programmable CPU module. The IC697CPM915 module can be configured by using Windows or MS-DOS based software for the control of material handling systems, machines, and processes. The CPU programming is performed over Ethernet or through the SNP port. Programmer connections through the Ethernet requires the installation of an optional Ethernet module. The IC697CPM915 module communicates with option modules and with I/Os over the rack backplane by using the VME C.1 standard format. The IC697CPM915 is compatible with the IC697CHS750, IC697CHS782, IC697CHS783, IC697CHS790, and the IC697CHS791 racks. The IC697CPM915 module must only be installed in slot 1 of the rack. The operation of the IC697CPM915 module is controlled either by the RUN/STOP switch or remotely through a programmer which is attached to the RS-422/RS-485 serial port on the CPU module.



 



Four green LEDs are provided on the IC697CPM915 CPU module to display the CPU status. The IC697CPM915 module is a 32 Megahertz CPU module with floating point support. The user memory on the module is 1 Megabyte. A lithium battery installed on the module provides battery backup to the data stored in the user memory. The nominal memory retention time is 6 months when power is not applied to the PLC rack. Flash memory is used for the storage of system firmware. The IC697CPM915 module is designed for use with GE Fanuc Series 60-70 PLC systems. The current consumption of the IC697CPM915 module is 2.8 Amps (nominal) from the 5 Volts DC bus. The available option modules include all IC697 LAN modules, numerous coprocessor modules, and bus controllers for the IC660, IC661 I/O, and IC697 family of analog and discrete I/O modules.



Repair Services for IC697CPM915

Type Lead Time Price Action
Repair Service 2-4 weeks $3991cartAdd to Cart

Our highly skilled technicians can repair your IC697CPM915. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC697CPM915

Please refer to the manual for more information about the IC697CPM915 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697CPM915AB
 IC697CPM915-AB, Series AB, Rev AB Request Quote
IC697CPM915BB
 IC697CPM915-BB, Series BB, Rev BB Request Quote
IC697CPM915CC
 IC697CPM915-CC, Series CC, Rev CC Request Quote
IC697CPM915CF
 IC697CPM915-CF, Series CF, Rev CF Request Quote
Common misspellings:
  • 1C697CPM915
  • IC697CPM9l5
  • IC697CPM915

Dimensions For IC697CPM915

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC697CPM915

Resolutions For IC697CPM915

About

Technical Specifications for IC697CPM915

BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697CPM915
Product type CPU module
CompatibilityGE Fanuc 90-70 PLCs
Clock speed32 megahertz
RAM1 Megabyte
Current draw2.8 Amps
Input voltage5 Volts DC
Serial port1
Operating temperature0 to 60 degrees Celsius
BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697CPM915
Product type CPU module
CompatibilityGE Fanuc 90-70 PLCs
Clock speed32 megahertz
RAM1 Megabyte
Current draw2.8 Amps
Input voltage5 Volts DC
Serial port1
Operating temperature0 to 60 degrees Celsius

About IC697CPM915

The GE Fanuc IC697CPM915 module is a single-slot programmable CPU module. The IC697CPM915 module can be configured by using Windows or MS-DOS based software for the control of material handling systems, machines, and processes. The CPU programming is performed over Ethernet or through the SNP port. Programmer connections through the Ethernet requires the installation of an optional Ethernet module. The IC697CPM915 module communicates with option modules and with I/Os over the rack backplane by using the VME C.1 standard format. The IC697CPM915 is compatible with the IC697CHS750, IC697CHS782, IC697CHS783, IC697CHS790, and the IC697CHS791 racks. The IC697CPM915 module must only be installed in slot 1 of the rack. The operation of the IC697CPM915 module is controlled either by the RUN/STOP switch or remotely through a programmer which is attached to the RS-422/RS-485 serial port on the CPU module.



 



Four green LEDs are provided on the IC697CPM915 CPU module to display the CPU status. The IC697CPM915 module is a 32 Megahertz CPU module with floating point support. The user memory on the module is 1 Megabyte. A lithium battery installed on the module provides battery backup to the data stored in the user memory. The nominal memory retention time is 6 months when power is not applied to the PLC rack. Flash memory is used for the storage of system firmware. The IC697CPM915 module is designed for use with GE Fanuc Series 60-70 PLC systems. The current consumption of the IC697CPM915 module is 2.8 Amps (nominal) from the 5 Volts DC bus. The available option modules include all IC697 LAN modules, numerous coprocessor modules, and bus controllers for the IC660, IC661 I/O, and IC697 family of analog and discrete I/O modules.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks $3991cartAdd to Cart

Our highly skilled technicians can repair your IC697CPM915. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks $3991cartAdd to Cart

Our highly skilled technicians can repair your IC697CPM915. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC697CPM915 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697CPM915-AB
IC697CPM915/AB, Series AB, Rev AB Request Quote
IC697CPM915-BB
IC697CPM915/BB, Series BB, Rev BB Request Quote
IC697CPM915-CC
IC697CPM915/CC, Series CC, Rev CC Request Quote
IC697CPM915-CF
IC697CPM915/CF, Series CF, Rev CF Request Quote

Common misspellings:
  • IC697CPM9l5
  • IC697CPM915
PDF
IC697CPM915 PDF