IC697CPX782 - In Stock | GE Fanuc - GE IP - Emerson Series 90-70

IC697CPX782

Rated 4.8 with 12 reviews

DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


credit cards accepted
better business bureau

IC697CPX782

Revisions: AA ic697cpx782CB CD DD ED GD HD JD 
Description: The IC697CPX782 module is a CPU module made for the GE Fanuc Series 90-70 PLCs. The IC697CPX782 module uses a 80486DX4 microprocessor. 
In Stock Ships Today
Request a quote for IC697CPX782

Description:

The IC697CPX782 module is a CPU module made for the GE Fanuc Series 90-70 PLCs. The IC697CPX782 module uses a 80486DX4 microprocessor. 


DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty

Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

disclaimer
credit cards
better business bureau
Revisions: AA ic697cpx782CB CD DD ED GD HD JD 

Warranty: 1 year DO Supply Warranty Included
Shipping: Worldwide shipping via UPS, DHL, and TNT
Repairs: We offer repair service for the IC697CPX782.
Exchange: Exchange credit for your defective unit available.
Conditions: We sell preowned surplus and refurbished parts.

To speak to a sales representative for pricing & lead time:


Rated 4.8 with 12 reviews

    Technical Specifications for IC697CPX782

BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697CPX782
Product typeCPU module
CompatibilityGE Fanuc 90-70 PLCs
RAM 1 MB
NV-RAM256 KB
Microprocessor80486DX4
Clock speed96 megahertz
Serial ports3
Voltage input5 Volts DC
BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697CPX782
Product typeCPU module
CompatibilityGE Fanuc 90-70 PLCs
RAM 1 MB
NV-RAM256 KB
Microprocessor80486DX4
Clock speed96 megahertz
Serial ports3
Voltage input5 Volts DC
s

About IC697CPX782

The IC697CPX782 module is a CPU module that is designed for use with the GE Fanuc Series 90-70 programmable logic controllers. In addition to 1 MB of battery-backed memory, the module also includes 256 KB of non-volatile memory. The IC697CPX782 module supports BMA in release 7.92 and later. The microprocessor on which the IC697CPX782 module is based is an 80486DX4 microprocessor with 96 megahertz of clocked speed. The I/O supported by the IC697CPX782 module include a maximum of 8000 analog I/O and 12,000 I/O in any mix. The rated time taken to process a single Boolean function is 0.4 microseconds. The IC697CPX782 module supports in-system firmware upgrades. The configuration of the module is performed through software running on computers which interface with the module over Ethernet or serial connections.



 



Connecting a programmer to the IC697CPX782 module via Ethernet requires the installation of an Ethernet interface module in the PLC. Connecting a programmer to the IC697CPX782 module via a serial port can be done through the 3 on-board serial ports. The protocols supports by the 3 ports are as follows: Port 1 supports RS-232 communication, and both Port 2 and Port 3 support RS-485 communication. Three of the 5 LED indicators on the module's front panel provide the status of the serial port activity. A serial cable is required for interfacing with Port 1, and a converter is also required for Ports 2 and 3. The shelf life of the module battery is 5 years at 20 degrees Celsius. The IC697CPX782 module requires 3.1 Amps of nominal current from the 5 Volts bus. The recommended operating temperature range is from 0 to 60 degrees Celsius.



Repair Services for IC697CPX782

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697CPX782. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions for IC697CPX782

Please refer to the manual for more information about the IC697CPX782 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697CPX782AA
IC697CPX782-AA, Series AA, Rev AA Request Quote
ic697cpx782CB
IC697CPX782-ic697cpx782CB, Series ic697cpx782CB, Rev ic697cpx782CB Request Quote
IC697CPX782CD
IC697CPX782-CD, Series CD, Rev CD Request Quote
IC697CPX782DD
IC697CPX782-DD, Series DD, Rev DD Request Quote
IC697CPX782ED
IC697CPX782-ED, Series ED, Rev ED Request Quote
IC697CPX782GD
IC697CPX782-GD, Series GD, Rev GD Request Quote
IC697CPX782HD
IC697CPX782-HD, Series HD, Rev HD Request Quote
IC697CPX782JD
IC697CPX782-JD, Series JD, Rev JD Request Quote
Common misspellings:
  • 1C697CPX782
  • IC697CPX7b2
  • IC697CPX782

Dimensions For IC697CPX782

Size
Input Type
Panel Cutout Height in mm
Panel Cutout Width in mm
Terminal Height in mm
Terminal Width in mm
Terminal Overall Depth in mm
Terminal Mounted Depth in mm

Dimensions For IC697CPX782

Resolutions For IC697CPX782

About

Technical Specifications for IC697CPX782

BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697CPX782
Product typeCPU module
CompatibilityGE Fanuc 90-70 PLCs
RAM 1 MB
NV-RAM256 KB
Microprocessor80486DX4
Clock speed96 megahertz
Serial ports3
Voltage input5 Volts DC
BrandGE Fanuc
SeriesSeries 90-70
Part NumberIC697CPX782
Product typeCPU module
CompatibilityGE Fanuc 90-70 PLCs
RAM 1 MB
NV-RAM256 KB
Microprocessor80486DX4
Clock speed96 megahertz
Serial ports3
Voltage input5 Volts DC

About IC697CPX782

The IC697CPX782 module is a CPU module that is designed for use with the GE Fanuc Series 90-70 programmable logic controllers. In addition to 1 MB of battery-backed memory, the module also includes 256 KB of non-volatile memory. The IC697CPX782 module supports BMA in release 7.92 and later. The microprocessor on which the IC697CPX782 module is based is an 80486DX4 microprocessor with 96 megahertz of clocked speed. The I/O supported by the IC697CPX782 module include a maximum of 8000 analog I/O and 12,000 I/O in any mix. The rated time taken to process a single Boolean function is 0.4 microseconds. The IC697CPX782 module supports in-system firmware upgrades. The configuration of the module is performed through software running on computers which interface with the module over Ethernet or serial connections.



 



Connecting a programmer to the IC697CPX782 module via Ethernet requires the installation of an Ethernet interface module in the PLC. Connecting a programmer to the IC697CPX782 module via a serial port can be done through the 3 on-board serial ports. The protocols supports by the 3 ports are as follows: Port 1 supports RS-232 communication, and both Port 2 and Port 3 support RS-485 communication. Three of the 5 LED indicators on the module's front panel provide the status of the serial port activity. A serial cable is required for interfacing with Port 1, and a converter is also required for Ports 2 and 3. The shelf life of the module battery is 5 years at 20 degrees Celsius. The IC697CPX782 module requires 3.1 Amps of nominal current from the 5 Volts bus. The recommended operating temperature range is from 0 to 60 degrees Celsius.



Repairs
Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697CPX782. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Type Lead Time Price Action
Repair Service 2-4 weeks Askenvelope Get Quote

Our highly skilled technicians can repair your IC697CPX782. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.

Revisions

Please refer to the manual for more information about the IC697CPX782 such as the wiring diagrams, data sheets and migration or obsolescence details.

Revision Part # Also Known as Availability
IC697CPX782-AA
IC697CPX782/AA, Series AA, Rev AA Request Quote
ic697cpx782CB
IC697CPX782/ic697cpx782CB, Series ic697cpx782CB, Rev ic697cpx782CB Request Quote
IC697CPX782-CD
IC697CPX782/CD, Series CD, Rev CD Request Quote
IC697CPX782-DD
IC697CPX782/DD, Series DD, Rev DD Request Quote
IC697CPX782-ED
IC697CPX782/ED, Series ED, Rev ED Request Quote
IC697CPX782-GD
IC697CPX782/GD, Series GD, Rev GD Request Quote
IC697CPX782-HD
IC697CPX782/HD, Series HD, Rev HD Request Quote
IC697CPX782-JD
IC697CPX782/JD, Series JD, Rev JD Request Quote

Common misspellings:
  • IC697CPX7b2
  • IC697CPX782
PDF