DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The IC697MDL651 module is a discrete input module by GE Fanuc. The module is part of Series 90-70 and it features 32 inputs. The unit has a rated voltage of 5 Volts DC and it requires a current of 0.53 Amps. The module has an on-state current of 1.7 milliAmps and an off-state current of 1.1 milliAmps.
DO Supply is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply. Product comes with DO Supply's 1-year warranty
Rockwell Disclaimer: The product is used surplus. DO Supply is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because DO Supply is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, DO Supply makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. DO Supply also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. DO Supply also makes no representations as to your right to install any such firmware on the product. DO Supply will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Warranty: | 1 year DO Supply Warranty Included |
Shipping: | Worldwide shipping via UPS, DHL, and TNT |
Repairs: | We offer repair service for the IC697MDL651. |
Exchange: | Exchange credit for your defective unit available. |
Conditions: | We sell preowned surplus and refurbished parts. |
Brand | GE Fanuc |
Series | Series 90-70 |
Part Number | IC697MDL651 |
Rated voltage | 5 Volts DC |
Input voltage range | -3 to 7 Volts DC |
Required current | 0.53 Amps |
Number of inputs per module | 32 |
Cable length | 30 meters (98.4 feet) maximum |
Isolation voltage | 1500 Volts |
ON-state voltage | -3 to 0.5 Volts |
OFF-state voltage | 2 to 7 Volts |
ON-state current (typical) | 1.7 milliAmps |
OFF-state current (maximum) | 1.1 milliAmps |
Brand | GE Fanuc |
Series | Series 90-70 |
Part Number | IC697MDL651 |
Rated voltage | 5 Volts DC |
Input voltage range | -3 to 7 Volts DC |
Required current | 0.53 Amps |
Number of inputs per module | 32 |
Cable length | 30 meters (98.4 feet) maximum |
Isolation voltage | 1500 Volts |
ON-state voltage | -3 to 0.5 Volts |
OFF-state voltage | 2 to 7 Volts |
ON-state current (typical) | 1.7 milliAmps |
OFF-state current (maximum) | 1.1 milliAmps |
The IC697MDL651 module is a discrete input module made for industrial systems constructed from a variety of components that operate on high level. The module is produced by GE Fanuc and it is intended for use with programmable controller units from Series 90-70. The IC697MDL651 module has TTL compatible input points that are completely independent and that are equipped with filter option. The users can choose a filter with a value of 1 millisecond or 10 milliseconds, depending on the application requirements. In addition to that, the inputs have pullup resistors that do not require power and the module has LED status indicators. There are 32 inputs available per module and the cable that is used can have a maximum length of 30 meters (98.4 feet).
The IC697MDL651 module requires a voltage of 5 Volts DC and its voltage range is from -3 to 7 Volts DC. In addition to that, the input characteristics of the module include an impedance of 5.9 kiloohms with a deviation of plus or minus 5%, along with an on-state voltage range of -3 to 0.5 Volts. The off-state voltage is 2 to 7 Volts. The IC697MDL651 module has a typical on-state current of 1.7 milliAmps at the rated voltage and a maximum off-state current of 1.1 milliAmps. The module requires 0.53 Amps of current from 5 Volts bus voltage and it is designed according to VME standard (C.1). The configuration of the IC697MDL651 module can be achieved through software that runs on either the Windows or MS-DOS operating system. The configuration is done through the Ethernet TCP/IP or SNP port.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your IC697MDL651. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the IC697MDL651 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
IC697MDL651E |
IC697MDL651-E, Series E, Rev E | Request Quote |
Size | |
Input Type | |
Panel Cutout Height | in mm |
Panel Cutout Width | in mm |
Terminal Height | in mm |
Terminal Width | in mm |
Terminal Overall Depth | in mm |
Terminal Mounted Depth | in mm |
Brand | GE Fanuc |
Series | Series 90-70 |
Part Number | IC697MDL651 |
Rated voltage | 5 Volts DC |
Input voltage range | -3 to 7 Volts DC |
Required current | 0.53 Amps |
Number of inputs per module | 32 |
Cable length | 30 meters (98.4 feet) maximum |
Isolation voltage | 1500 Volts |
ON-state voltage | -3 to 0.5 Volts |
OFF-state voltage | 2 to 7 Volts |
ON-state current (typical) | 1.7 milliAmps |
OFF-state current (maximum) | 1.1 milliAmps |
Brand | GE Fanuc |
Series | Series 90-70 |
Part Number | IC697MDL651 |
Rated voltage | 5 Volts DC |
Input voltage range | -3 to 7 Volts DC |
Required current | 0.53 Amps |
Number of inputs per module | 32 |
Cable length | 30 meters (98.4 feet) maximum |
Isolation voltage | 1500 Volts |
ON-state voltage | -3 to 0.5 Volts |
OFF-state voltage | 2 to 7 Volts |
ON-state current (typical) | 1.7 milliAmps |
OFF-state current (maximum) | 1.1 milliAmps |
The IC697MDL651 module is a discrete input module made for industrial systems constructed from a variety of components that operate on high level. The module is produced by GE Fanuc and it is intended for use with programmable controller units from Series 90-70. The IC697MDL651 module has TTL compatible input points that are completely independent and that are equipped with filter option. The users can choose a filter with a value of 1 millisecond or 10 milliseconds, depending on the application requirements. In addition to that, the inputs have pullup resistors that do not require power and the module has LED status indicators. There are 32 inputs available per module and the cable that is used can have a maximum length of 30 meters (98.4 feet).
The IC697MDL651 module requires a voltage of 5 Volts DC and its voltage range is from -3 to 7 Volts DC. In addition to that, the input characteristics of the module include an impedance of 5.9 kiloohms with a deviation of plus or minus 5%, along with an on-state voltage range of -3 to 0.5 Volts. The off-state voltage is 2 to 7 Volts. The IC697MDL651 module has a typical on-state current of 1.7 milliAmps at the rated voltage and a maximum off-state current of 1.1 milliAmps. The module requires 0.53 Amps of current from 5 Volts bus voltage and it is designed according to VME standard (C.1). The configuration of the IC697MDL651 module can be achieved through software that runs on either the Windows or MS-DOS operating system. The configuration is done through the Ethernet TCP/IP or SNP port.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your IC697MDL651. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Type | Lead Time | Price | Action |
---|---|---|---|
Repair Service | 2-4 weeks | Ask | ![]() |
Our highly skilled technicians can repair your IC697MDL651. All of our repairs come with a 1 Year DO Supply Warranty. Please contact us for additional information about our repair process.
Please refer to the manual for more information about the IC697MDL651 such as the wiring diagrams, data sheets and migration or obsolescence details.
Revision Part # | Also Known as | Availability |
IC697MDL651E
|
IC697MDL651/E, Series E, Rev E | Request Quote |